How Are Made Dumper Hydraulic Jacks and Cylinders Go Through A Vigorous Manufacturing Process
Вставка
- Опубліковано 2 вер 2022
- How Are Made Dumper Hydraulic Jacks and Cylinders Go Through A Vigorous Manufacturing Process
#hydrauliccylinder
#hydrauliccylinderrod
#hydraulicsystem
I can’t help but think I’m watching a scene from the Jawa’s droid factory!
The title says “a vigorous manufacturing process”………
I watched Curtis over at CCE Manufacturing’s channel on utube when he painstakingly built a hydraulic cylinder from scratch. He built it meticulously with ultra high standards from beginning to end.
I feel these guys here are like the “Saturday Night Live” version.
Joking aside. If given the chance and equipment, these same guys right here and others in the same situation could out do most of the high skilled workers that are in this field around the world from developed nations.
They just need a helping hand.
Likewise, CEE is a great channel, and this stuff is the opposite end of the spectrum from what Kurtis does - but I must give them credit for making something that works with such primitive equipment and questionable techniques. BUT - Several times I cringed at their complete lack of surface or material preparation - and I wouldn't trust those welds for a chair, let alone a high-load system like a pressure cylinder and the work it will be doing.
first of all these guys dont give a F@#$%K, SAFETY is not considered here, who cares non...🤣🤣🤣🤣
These are the Pakistani version of Curtis with Chinese uncles who taught then the tricks of the trade 😊
That is about the shadiest cylinder honing Ive ever seen!
Главное колпачки-заглушки надеть на штуцера в конце... а то грязь попадет работать не будет :)
Главное, чтобы костюмчик сидел
Непринужденно, легко и вальяжно.
Все остальное, поверьте, неважно.
Нет и не будет серьезнее дел.
Главное, чтобы,
Главное, чтобы,
Главное, чтобы костюмчик сидел.
Главное, чтобы,
Главное, чтобы,
Главное, чтобы костюмчик сидел.
Главное, чтобы костюмчик сидел
Так, чтобы в жизни себе не простили
Те, кто такого себе не пошили.
Их непригляден и жалок удел.
Главное, чтобы,
Главное, чтобы,
Главное, чтобы костюмчик сидел.
Главное, чтобы,
Главное, чтобы,
Главное, чтобы костюмчик сидел.
Главное, чтобы костюмчик сидел
И, как пошит он, могли показать вы,
Ведь для того и придуманы свадьбы.
Главное, чтобы костюмчик сидел.
Чтоб, от восторга дыша еле-еле,
Гости на этот костюмчик глядели,
Чтобы невеста, сомлев от пошива,
Вдруг поняла, что она поспешила.
Главное, чтобы костюмчик сидел.
Главное, чтобы костюмчик сидел.
Главное, чтобы костюмчик сидел.
Главное, чтобы костюмчик сидел.
ты главное с дивана не упади, а то не кому хуйню писать будет
ага! на многое можно забить, но смазка с пылью! меня прям корёжит. Убил бы!
I fricken love these videos, but just once, I would like to see their work being USED. I want to see this thing in action!
No, no you really don't, that is even scarier. You've seen HOW they're made, do you want to see the risks people are taking when USING this stuff?
NO hoses no seals no fittings, I love it.
Мне как работающему на внутришлифовальном станка 3К228в , на это больно смотреть.
Это не ваша уровень.
А что так можно было!?🤣
Самые упоротые токаря в галактике Млечный путь
E Deus que da tanta sabedoria e inteligência pra voces...Obrigado pelo vídeo. ..saudaçoes do Brasil
esses caras sobrevivem facilmente a um apocalipse hollywoodiano, parabéns pelo trabalho.
I'm the only one constantly thinking about the minions when hearing the accelerated voices?
Смазка с пылью и песком! Вкусняшка!
Saya hadir meyaksikan nya sobat ku..
Semoga sukses selalu.
Salam dari aceh Indonesia
Жолтый коготь это наверное самый лютый мастер
Токаря волшебники 👍
11:48
Totally...😂
Also, I love your custom cutting lubrication system! Lol! 😂😂👌🙏💪
2 liter capacity
Кривой электрод вернулся пацаны!
visit my channel too friends there are interesting things to see
The weld will hold! 😂
I love to see how are made.
Muito bom!
you are the best of the best👍👍👍👍👍👍👍👍👍
最後のアッセンブリを土の上でお構いなしに、工具にも塵がががががが(絶命)
現役油機設計マンです
الله يسر اموركم
These guys work. No frills. Just hard work and will.
Ambarının içini temizledim
Paranın içinde temizledi iyi temizleyiciymiş gıcır gıcır temizlendi şimdi iyi çalışır daha bir çalıştırma seni bilen olursa duygularım uygun yer olursa olur bence olur
Yapan olursa yaptıran da olursa her zaman bu işler yerli yerinde yerinde olur
😂
If I was to work like this in our shop will be chased so fast🤣🤣🤣🤣 but good work for what they have
Хорошо бы посмотреть на машину из запчастей, которые они склепали. Гараж 54 обкурился и спит со своими самоделками.
Garage Ie home
all that effort .. but cant be bothered to clean it up and paint it so it looks so much better.
Would that make it work better
Thanks to to the video . Long life to all of you team . Bravo
Necessity is the mother of invention, not only that, but they’re re using things that would ordinarily be thrown out! This is good for the environment, but great for their pocketbooks ! 🙏💪🤘🙌👏👏
There are thrown away elsewhere for a very good reason. A hydraulic ram should be safe and not built by morons with rubbish tools and no from garbage
They have invented nothing you dolt
compliments!
24:00 Да-а... Резцедержатель не скоро сотрётся. Ещё мно-о-о-го заготовок зацентровать можно. 🤣
А то!
It was smoking 😂
Gosto muito desses Vidios .
Nonatinho aqui do Maranhão
visit my channel too friends there are interesting things to see
Minions everywhere. They do brilliant job.
I am proud because the people here are great people in the science of iron.
Im sure they make rockets to space somewhere in the shops
Amazing
구독과좋아요
누르고 갑니다
영상 잘봤습니다
😉This is the process where precision is an unknown word. Nothing serious can be made or repaired this way...unless we are talking about plowing a soft land.
I do not agree with you Mr. Peter if it lacked precision noone is stupid to pay them..!
Their precision does not need Autocad designs and drawings as you are used to, they are in this business since generations and their brain sketches more precise model than your Autocad.
You are just jealous because you have no skills and you think that unless one spends at least $70,000 in education, a person can not have a skill. It's called an IQ my friend!
@@realemonful I am sorry if I offended you. You will put two and two together eventually, because all the developed nations have clean work-shops. Gravel scratches metal...wobbling shafts destroy bearings, gaskets and seals.
Nevertheless, I wish you all the best...especially if you plan to progress without education, order and hygiene.
@@Zerotolerance1212 precision in this case is very important or people can be hurt or killed.
@@Zerotolerance1212 I spent much of early life in my perfectionist mind neutered from gaining actual working knowledge because I was unaware of how much tolerance there was in the trades and things didn't have to be perfect to be perfect enough. One thing I found in carpentry is drywall and Jesus have much in common, they both cover a multitude of sins.
Must be Pakistan, where they make everything out of scrap and repair the un-repairable. Some of the best recyclers on the planet, working in less than ideal conditions with basic tools and virtually no safety equipment.
The more complex, the more safety needed
I want this business
visit my channel too friends there are interesting things to see
@@alaconprojectmanagment2947, cu z z, n. Gi 6,.
SSX😪🇨🇱
Dde
it is like i am watching a fred flintsotne cartoon, but they get it done. feel bad they can't afford nicer stuff though.
Muito bom 😃 good 😁
Muito conhecimento no que fazem parabéns :faltou acabamento na parte externa da camisa ,mesmo assim PARABÉNS 👍OK ? BRASIL TERRA DE BANDIDOS NÉ.
Amazing Craftsmen!
End cap just welded in with no reinforcement will basically turn this tube into a open ended explosion.
No explosion with oil. Air is much more dangerous, because it can be compressed.
And don t forget it s not finished yet, a support has to be welded.
I have seen many articles critical of "ship breaking". I can't help but notice how much local industry like this is possible because of the low cost salvage steel available. Were this man to have to pay for new steel, it would be cheaper to buy new Chinese made hydraulic cylinders. The steel used in the ships is likely of higher quality than new steel.
I’m sure it is. This was an amazing video.
@@tomsommer54 Absolutely!! I am more of a hobby machinist however I am finding myself making parts for my small engine business more and more because of the shortages and shipping costs as well as other factors I am not aware of. I either get the wrong part, have to wait extended periods of time or even not get what I ordered at all. These guys are awesome and are extremely needed. This is also how they feed their families.
It isn't
One thing that always concerns me when I see the steel that they remove from these ships is that there is always a coating of some sort on it... I don't know what the coating is but I'm sure its not going to be good to breathe it in.. i always envision it being asbestos and the possible impact on the community somewhere down the road... I don't know if they do or did use asbestos in ships.. it wouldn't surprise me.. I know it has more or less been universally banned now but possibly not when the ships were being built
@@baldyoldfart5828 I worked building ships long ago and they use a nasty rubberized coating. It does produce toxic fumes if burnt off.
So great to see your job my beautiful people, but please use gaggle, protect your eyes 🙏🙏🙏
Holy Shit >> Iv'e never seen SOOOO MUUUCH DIRT Integrated in an assembly of Anything in my Life !!! Oh My God !!! ( What kind of Guarantee is involved here and whats the Working Life [ 4 hours Tops]. . . . ?) Jesus Wept !
Even when his tool tip starts hitting the chuck jaws, he is not phased one bit........
Top demais, povo inteligente, parabéns..
I still don't get the point of throwing everything in the dirt and sand first, then assemble.. Maybe good for keeping the products polished at all times..
🤔
Muito bom trabalho Parabéns 👍👍👍
That was one clean work bench, how clean he keeps the lathe, chancer
Safety sandals and safety squint when welding does work!
Норм работают, но сварщик, такое ощущение, что первый раз в жизни что-то приварил
Would have been nice to see it in action👌🏽
В середине же еще остались пятна не обработанные!!!!!
Пятна делу не помеха! Закрыл глаза, и их не видно! ))😉
Они с песком собирают, само отшлифуется.
@@timonreikin7088 тогда там все шлифанет насос распред
@@vadimjcb3cxmurmansk класс, зато их родня без работы не останется. Они там по ходу целыми улицами ремонтом занимаются.
@@timonreikin7088 так и хоронят их улицами наверное
Amazing!
The secrets of these "Vigorous Manufacturing Processes" must be hidden under the piles of dirt.
They look pretty vigorous to me!
Cutting Edge Engineering, eat your heart out!
Show de bola, Deus abençoe tudooo diiibãooo, canal do tobias8_150, por aqui, chofer aqui do Mato Grosso
visit my channel too friends there are interesting things to see
Amazing 👍👍
These guys are incredible. I consider myself a novice compared to these guys. I find myself making more and more parts because of shipping constraints as well as too many other factors that I am not aware of. I really would love to know what the parts are that become the plunger. There are hundreds of those things in different specs that they clean off and turn down to beautiful plungers that accept o rings and hold pressure. Just wonderful uses for old steel.
Looks like cast steel parts, probably made only a few blocks away specifically for them. I find it interesting how much they do with so little, but smashing that castle nut is just horrific and not even doing any sort of pressure test...
11
This Old Tony would have a Heart Attack if he watched this.
amazing !!!
What is precision with scrap in the dirt!
Awesome 👋
Ficou muito muito bom mesmo! Eu queria fazer uma pra mim mas aqui no Sul está bastante caro os discos! Quanto custa um disco desses aí?
All that machine work couldn't drill a hole for castle nut. Being a mechanic/machinist these videos are like nails on a chalkboard to me.
That's a real negative to say about their work
@@darrylwmurphy738 11:48 😂 he doesn't have to say anything does he?
ำ
a long process and satisfactory results, how much is the selling price of a ready-made hydraulic like that
Ready made? It's not even finished...
Check some of the runout!
Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.
Yeah, but you are Chinese, so there is that.
Quality material with cheap Chinesium metal
- квалитет (даже ютуб такого слова не знает), шероховатость, допуски?
- не умничай!
Эти люди понятия не имеют что они делают. Им показали они повторяют.
Земля с песком с пола сама дошлифует при работе.
De que hacen el trabajo lo hacen y ahi todo bien la verdad increíble pero ahora la calidad? No lo se si aguante a las altas presiones del sistema hidráulico
Czesc Wszystkim Pracownikom bardzo dobra praca POLSKA Jan polonski
Curtis from CEE has been doing it wrong this whole time lol
I wonder if he does watch these videos?next time I will have to ask him😁
😂☝️
bravo gilbert france
24:34 почему задняя бабка не вращается?
On the one hand, one marvels at the courage of these poor people to undertake such difficult and delicate work, with equipment of the Middle Ages... in particular, working on the ground, in the dust (think of the dirt in this hydraulic cylinder), almost barefoot, dressed as best they can, and with children around...
How can such a nation expect to develop?
😂 bro they have lathes that are worth tens of thousands of dollars. In what world is this middle ages equipment???
Muitas destas oficinas fabricam pecas em série nestas mesmas condições acho que vcs compram peças que São fabricadas ai com esse trabalho insalubre.
수고 하십니다 유압샤우드굵기 로드 90 mm 길이 1500mm 면 몇 달러나(미국달러)하나요? Thank you for your hard work. How many dollars (US dollars) does a hydraulic shower rod with a thickness of 90 mm and a length of 1500 mm cost?
👍👍👍!!!
😵💫🧐😮💨 Präzision sieht wohl ein "wenig" anders aus!!!🤗
Молодцы! А двигатель самолётный сможете склепать?
Они по ходу и сам самолёт соберут без проблем.
visit my channel too friends there are interesting things to see
Уже клепают! Двухконтурный турбореактивный авиационный двигатель GTRE GTX-35VS Kaveri. Разработчик: GTRE (Индия)
@@antonp1777 Это Пакистан.
@@TheSlayerworld За что купил за то продал.
en.wikipedia.org/wiki/GTRE_GTX-35VS_Kaveri
Éste trabajo no resistiría ser sometido a una inspección de calidad para su aprobación.
Probablemente en su país aprueba todas las certificaciones
@@leonelvillagra560 In the west...yes, that's why a Caterpillar hydraulic fail is almost unheard of... whereas this garbage, if it even holds fluid, will collapse and severely injure someone or some thing.
Я один здесь чтоли кто офигел от того как они трубу точили ? 🤦🏻♂️🤷♂️
Не, не один, мы просто в ахуе!
полистайте чат, есть и офигевшие. А некоторым скорую вызвали... )
@@Vperedsmotryashii ну понял ))🤝🏻✊🏼
Porque vocês se vestem com roupas iguais umas das outras ? 🇧🇷
Super channel.
...................
What about rod? Looks well polished, also surface needs to be hardened.
I'm still amazed they have all their toes and aren't suffering from welders flash.
Don't envy them 🤣 they have nothing but their body to fight with for a living.
They do. These countries have an epidemic of early onset blindness. No kidding
@@A_Stereotypical_Heretic Wonder why.
@@colincunningham1902 it's a real mystery lol
Next lvl Immune systems develop
Muy buenos mecanicos torneros montadores soldadores son completos la pregunta que me hago que espectativa laboral tienen no tienen condiciones de seguridad no saben de un prevencionista de riesgos edta gente deberia tener un buen sueldo.
How is it that these people can do this from the seat of their pants, using old junk tools, working on the dirt floor? I am seriously impressed. Imagine what they could do if they had a CAD system to design with and a modern machine shop? Probably be designing and building some amazing stuff.
The equipment sure is old, but upgrading to computers and software would be so expensive for them. That said, a clean shop and some basic PPE would do wonders for them, and they could much more easily afford that. Dirty tools, dirty machines, dirty rags, loose-dirt floors. Abrasive dust everywhere. Loose clothing, open sandals, welding indoors with a garbage visor. Give these guys some overalls, boots, safety glasses, a solid floor, a fan to weld under, and a trough to wash things in, and their health and part quality will jump overnight.
Pakistan is one of nine states to possess nuclear weapons. Imagine how clean that must be, and the systems they use.
@@asm_nop
Brain imagined CAD system and then adopted, while these people have brain to use directly to convert into skill.
If they had a CAD? Oh... probably make stuff that doesn't constantly fall apart and kill people?
24,29 нифига как они центруют шток
Бабка должна же вращаться с поршнем, не?
They don't 😂
Where tolerances are measured in mm. They get er done though.
Love the steel toe sandals
Salam Indonesia amatir bosqu
A full description of rubber compounding process ua-cam.com/video/yK6-QNB1roo/v-deo.html
Немцы покинули чат
بسیار عالی و آموزنده برای ماشین سازها متشکر .
ماشاء الله تبارك الله
This will turn into a large job do to the play in his lathe .
How does the finished product come out even the way the shaft wobbles as its spinning
Lol it doesnt
вот это я панимаю люди роботают!!!