How to: Check a misfire & replace HT ignition leads
Вставка
- Опубліковано 10 бер 2020
- I had a misfire which quickly became bad. It turned out to be a failed HT lead. Here's how to find it, and replace ignition leads if necessary. The engine shown is a Duratec HE in a Ford Mondeo Mk3, but the principle is universal.
More about the replacements and why OEM: • Quick tip: Best choice...
High tension leads (cables) are a service item really and should be replaced with a new (not used) set. Try Amazon ~
US: amzn.to/39FPaYB | UK: amzn.to/2Q1kidq
If you need a coil pack ~
Amazon US: amzn.to/2IxadAz | UK: amzn.to/3aC8BSa
Review of the scan tool I'm using with Forscan: • Review: Vgate iCar Pro...
Amazon US: amzn.to/2xVTDVx | UK: amzn.to/2N9UCHn
(Using the above Amazon links helps support my channel and is appreciated!) - Авто та транспорт
Links (more in desc):
HT leads ~ Amazon US: amzn.to/39FPaYB | UK: amzn.to/2Q1kidq
Coil pack ~ Amazon US: amzn.to/2IxadAz | UK: amzn.to/3aC8BSa
Hi can you help me. I have golf 6 tdi, i trail to coding auto folding miroir .but it give me not support with obdeleven.
If you have some idea please
Wish I'd watched this last night. Just spent this morning buying plugs, coil pack and then HT leads, in that order, in three trips to Euro Car parts for my misfiring MK 2 pre-facelift Focus. Problem was HT leads. I'll be getting my multimeter out later to find out which bugger was the culprit. Apart from that one, I'll now have a complete set of spares at least, lol.
Hey Craig, loving your scientific approach and British understated presentation/lack of hype (dude!), from one Brit to another
Hi Craig! I’ve enjoyed all your videos so far as your Mondeo is the same as mine with a very high mileage of about 300,000 & I’ve owned it now almost 10 years & bought it second hand. All I have had to do to the engine is replace the water pump. Which was a real sod of a thing to remove because it had been glued in from new by the looks of it!
The ignition gave me a bit of strife a year or two back, & a mechanic said it was the coil pack so purchased a brand new one! In all the time that I have owned the car I have never replaced the spark plugs because I have been told that I shouldn’t need to! The car has never missed a beat except for the coil pack! ( touch wood!) It’s got tonnes of get up & go! Even though I have driven from the middle of the north island to the top & back again numerous times!
I am surprised that you have had to renew or look at lots of various things with your car’s engine that I haven’t or won’t ever consider touching! I have however just recently added some Power Up to the engine & transmission to help with the lubrications of the engine & automatic transmission smoothness etc. I probably unlike you have a heavy right foot, so when I drive somewhere in my Mondeo it’s not going slow, but I always keep to the speed limit!
Oh I recently replaced the plastic rocker cover for an alloy one because the gasket seals leaked oil into the spark plug wells as the four seals became hard & brittle & stopped sealing & no amount of tightening would over come it! You cannot over tighten plastic covers without breaking something!
Cheers for all your videos as they all have been most helpful especially changing the power steering pump having two o’rings that have to be of the green type!
As for the catalyst in the exhaust system have your muffler man knock it all out and the engine goes just as good if not better without it not in there!!
Keep your videos coming as they are all full of good helpful knowledge!
you've helped me a lot in the past with fixing my old Zetec 2.0 on my Ford Escape
I haven't had the chance to thank you, so thank you!
Really excellent video, clear, concise and very well paced. Thankyou for this, it was extremely helpful
Very helpful videos ,keep up the good work.
Brilliant and detailed explanation ThankYou. Great oratory and easily followed . Stephen australia
Excellent stuff!
Very helpful. Thank you. :)
Great video!
Nice job 💪 thx 😎👍
Hi Craig, first off thank you for all of your videos on UA-cam. We have exactly the same Mondeo and because of your guides I've managed to replace my swirl flaps (twice!), replace my clutch, carry out various service tasks and diagnose many problems. I'm posting now to ask for some advice. About six months ago I started to notice the juddering you've referred to in this video. When I checked my plugs, only one of them (number 3) had an obvios issue. The metal connector at the plug end of the HT lead had corroded and stuck itself to the plug end when I pulled the lead out. I cleaned it up a bit, and then ordered a new plug and just the specific HT lead. I've replaced them both today and initially it seemed to work, but as the day went on, the juddering returned. Do you think it could be a simple case of disconnecting the battery overnight and thus resetting the computer? Or, could I have missed something? I'll take all the leads out again tomorrow and follow your guide to make sure the connections are clean and sound, but if that doesn't work, any ideas? Respect, Ian
Hi Craig I've got a petrol feista 09 plate won't start again if the engine is warm change a battery , new spark plug and the voltage are good any advice what's wrong with it?
Gold one I have changed good
Please tell me, which software you use on your mobile phone for diagnostics? I have the same model of car.
Hi Craig, I have owned my 2001 2ltr Auto Mondeo for 20 years now and maintained it myself. Recently if I'm in drive and stationary then hit the accelerator in quick succession so say pulling out of a junction the engine hesitates then goes but if I slow down the reaction time from brake pedal to accelerator then all is fine. The resistance on the HT leads are all within tolerance and I have replaced the spark plugs. Like you I have a obd scanner that provides live data but no faults shown so I was wondering if the throttle position sensor could be the cause!
Possible yes, easy to test with a volt meter, I have a video on that with same engine. No faults ok but you will need to get into the weeds of the air/fuel data if the TPS checks out. Check other basics, air & fuel.
Hi Craig
I would have a question about my car if you could help me out.
I was just wondering. MOT has been done to my care which is a Ford fiesta, before the MOT the noise level was high in the car, its consumption was also high and it's felt like it doesn't have much power in it. after running a test on its computer to find any problems with the car, everything was fine. oil has been changed, oil filter and also Air filter was changed and they reset the on board computer. The engine ran very nicely without effort, very quietly, very quickly and its fuel consumption was perfect no noise whatsoever. The yellow engine error light came on when we were traveling, the noise level increased, the consumption also increased, the performance decreased. now I don't know what to do... any suggestions please
How to remove the mk3 cooling fan and water tank, as well as complete water channel cleaning
Help please! We just bought a Ford Mondeo Mk3 Automatic second hand, and there's a hose loose. It's the one on the gearbox, bellow the air intake and below the battery. Right next to the sticker with PTAN 1S7P-BA. We don't know where should be plugged the other end. Any guidance would be much appreciated!
There is a vent hose down there that doesn't connect to anything, it's just a breather. Search images of that to compare and confirm.
@@CraigsDIY Ok, thank you very much! We were vary scare when we noticed a loose hose. We asked a mechanic but didn't believed him much. Now we believe it thanks to your answer. Once again, thanks you very much!
I've changed HT leads, spark plugs. cleaned out tmap sensor and air filter, throttle body. and my car hesitates at low revs at start of acceleration (sometimes) ... is it coil pack, air leak?? (mondeo mk3)
Well you need to know what the hesitation is first, check what you can with a scan tool. Misfires can be because of fuel or air as well as ignition.
Hey, have you still got your mondeo? I think I'm the only one around here for miles that still runs mk3s
Still going good
Me too i have misfires just under load and just when hot and all the garages are closed because of the quarantine
Can you please help me with my floty broblem
Can you show me how to change the transmission filter?
Depends on your engine. The gearbox attached to these Duratec HEs is the CD4E and the filter is not serviceable. See ua-cam.com/video/TRW3utBVxV8/v-deo.html
Have you got the leads yet? I'm still waiting for the video about the leads
Better late than never
ua-cam.com/video/Vj0M2jhN60c/v-deo.html
it was coil pack for me.
is this post xmen where magneto works on cars? xD Michael Fassbender look alike for sure
If you use your phone recorder you can hear the arcing to ground whether engine is running
I prefer to disconnect and test one lead at a time so you dont forget the order in which the leads are connected to the coil
Like the man says, lay the bunch on top, they pretty much go where they should
My 1.8L petrol mondeo has a rough and inconsistent idle.
Have replaced the sparkplugs, ignition coil, ht-leads, fuel filther and cleaned the air intake parts.
Anyone have any ideas what it could be?
If it's not spark then could still be fuel injectors, if it is idling over-revs then more likely a vacuum leak downstream of the throttle body.
@@CraigsDIY It's very strange, it works buttery smooths some times. Often, when I first start the engine up it works smooth, but after the engine is warmed up, it starts to run badly and the engine vibrates. No strange distinquishable noises that I could detect. The idle revs also change depending on its "mood", some times it idles at about 750rpm, but sometimes it goes as high as 1200.
Maybe a vacuum leak that is opening up with heat.
@@CraigsDIY Could not find any leaks or any other apparent faults. The most likely problem may lie in the inlet manifold, but that is quite a job to open and finding parts is challening. It''s very strange, because the engine works smootly on startup, but gradually gets worse after it gets warm.
Hi Craig, we love what you do and we'd love to work with you as a reviewer for some of our products / affiliate for our website if you're interested. We're available at marketing[at]blackboxmycar.com. Let's chat!
I have a 2.9 12v cologne engine it's a piece of s***
HT leads? what are those, i have not seen them on a vehicle for years, oh you have a FORD that explains it.
Thank you very much man , you're perfect explain solved my problem , 🖐️🙏🫡🌹