G'day Anthony, loving your videos, very informative and learning alot. I was wondering if you could make a short video showing where you would install the Scanguage 3 in the Hilux and if it obscures your vision at all. Cheers mate.
Curious how you went with the windscreen mounting, as in is the windscreen mount holding up in the elements etc... (Unfortunately my vehicle is parked outside 24/7) Thanks mate love your work! 👍
Do you know what the figure in the Mass Air Flow window represents? I have an ongoing error code P0101 that is causing me problems & was thinking if I bought the ScanGuage 3 it might help solve the problem. Thank you.
Hi Anthony, watched some of your other vids around the injector coding and pilot learning. With the SG3, are these functions possible? I have only found a comment previously somewhere that a SG2 could do coding, but not confirmed anywhere else.
A couple of years I went through all the active service mode 21 code PIDs and applied the right formula for the injection readings. Nothing I found resembled injector feedback values. My guess is that Toyota use more than one CAN bus interface, one that works with standard OBDII format and tools, and another one for Toyota specific tools and software (like with Techstream). Thus, I don't think it's possible using standard OBDII interfaces. But that's just an assumption from my playing around. This was with a 2012 Prado with 1KD and 5 speed auto.
Wow, I really like this!
Definitely on my birthday wish list, I’m very impressed.
G'day Anthony, loving your videos, very informative and learning alot. I was wondering if you could make a short video showing where you would install the Scanguage 3 in the Hilux and if it obscures your vision at all. Cheers mate.
Thinking this might sit next to the driver's side center vent on a 90 degree bracket with some VHB tape on a 150 Prado
Can I purchase this from Amazon US and have it work on a Caribbean market hilux (2022, 1GD)?
Curious how you went with the windscreen mounting, as in is the windscreen mount holding up in the elements etc... (Unfortunately my vehicle is parked outside 24/7)
Thanks mate love your work! 👍
So far so good no complaints
Be interesting if sitting on the dash like that will kill it with the heat on a summers day, only time will tell
Interesting to see compatible with a 05/2006 Euro 3 lux.
what is trans temp 1 and trans temp 2, Pan or Torque Converter?
Do you know what the figure in the Mass Air Flow window represents? I have an ongoing error code P0101 that is causing me problems & was thinking if I bought the ScanGuage 3 it might help solve the problem. Thank you.
The screen reminds me of Windows 3.1
can I replace just my scan gauge reader unit with the scan guard 3 and not change the plug?
I would think so I guess it’s the same lead
How do you find reading for how much adblue you have in tank to show on guage
Will this work on the 7.3 commercial version (mostly schoolbuses, 9 pin round port)
Can you just display a single gauge? I have vision issues
Sure you should be driving then mate?
What is a comfortable temp for the pan temp on a 2015+ auto Prado 150? And what is a bad temp to see?
Is there the ability to correct distance to empty? My fuel usage is off by 1.5L per 100km
Is the screen too bright at night? Would love the extra info displayed, but not if it is a bright beacon...
The brightness is two finger adjustable
Are these any different or better than ultraguage?
Hi Anthony, watched some of your other vids around the injector coding and pilot learning. With the SG3, are these functions possible? I have only found a comment previously somewhere that a SG2 could do coding, but not confirmed anywhere else.
A couple of years I went through all the active service mode 21 code PIDs and applied the right formula for the injection readings. Nothing I found resembled injector feedback values. My guess is that Toyota use more than one CAN bus interface, one that works with standard OBDII format and tools, and another one for Toyota specific tools and software (like with Techstream). Thus, I don't think it's possible using standard OBDII interfaces. But that's just an assumption from my playing around. This was with a 2012 Prado with 1KD and 5 speed auto.
can you set the tire size to fix the mph ???
You don’t need to fix it is correct
Does it clear codes?
Exelente
Where do you get them and how much are they likely to be
Azscanners
Google it
A-z A to Z scanners
Pretty much anywhere online. They run about $270 (US dollar).
Butter Bing 👍😊
How did you get the boost pressure setup
Watch the video & videos
Time to sell my scanguage 2. 😂