This blade setter is a must have for all barbers!!! Quick,easy to use,and cost effective. I also purchased your modified outliner blade and I have no complaints!! Much respect for what you are doing coming all the way from Philly!!!
Your amazing thank you for this information. I adjusted my GXT blade and it works much better. Thx you for being a leader in our industry I appreciate your craft and you videos. Although i'm not a barber I as Supercuts Stylist, so I hold a different license but I use clippers and edgers on all of my guest with the exception of women, I'm going to share your channel with all my girls. Thank you Chu
I appreciate your product. It works real well. I brought two of them. The black & the blue ones. This save me alot from using the table & the mirror for adjusting my blade. This product is what it's says........... On The Money 💰 💰 💰 💰 💰 💰 💰 💰 💰 💰. I'll be doing a review soon on your product. Once again. Thank You.
Ive been using the T Outliner modified blades for about 4 or 5 month and they still hit hard. The best thing about these modified blades are that they do not cut the skin. Ive had my blades sharpened before at another place and for some reason the cut my skin up. For a blade to his as sharp as it does and not cut into the skin is mind boggling to me. Maybe its the modification.
Ok, you put it on, put how did you a just it once you put the blade on? Show what the perfect alignment is? Or does the Blue alignment peace automatically line the blazes up by itself once you put it on? 3n1
Chuka Torres is there anything you've come up with to compensate for the deficiency of that nylon or plastic piece that sits on the still blade and keeps the moving blade in place? I make mention of this because I understand that these pieces as well as the blades themselves are mass produced and the efficiency of the product is compromised, at least from my present point of view,unless this particular issue is part of the design. Now what I'm refering to is the "unevenness" of this piece ,even if its a hair off,which one can gauge with a pair of callipers. it seems to me that no matter the adjustment one makes to zero - gap the blades, one can still push the blade and notice that it can rock or lift up on either side.I don't know if I am explaining this right,but you can notice it when your cutting and one side still "hits" harder than the other ,even though the blades have been set "perfectly " with a proposed tool specifically used to align the blade.Let me make clear that this is NOT a statement against any product of yours or your company friend. This is something that I've noticed and thought to share with you and see if maybe you guys can come up with a fix for this issue.I already can estimate the tedious approach to this,but I think it would be worth it for both the barber and client. Keep up the good work Chuka and your staff.
I just adjusted my blades. When I put them back on guess clipper they were way to close and sharp. Tested them on myself just to make sure that the customer wouldn't get cut and they were way to close. Any ideas?
i have the andis styliner 2 blade setter it came with a razor the only thing is no matter how many times i set it one side always scraches? is it the tension screw
I purchased the wrong one off Amazon and I meant to buy the black one will the blue one still work on the andis t outliner? I don't want to waste time sending it back and buying another one.
The packaging on the Styliner II says "fixed T blade" as though it's not adjustable. Is this something new or has it always been that way? Just want to make sure I can zero gap them before buying.
Aight chuka finally got my on the money black. Question Where can i purchase modified andis trimmer blades? Thanks bro and thanks for replying before. Peace my bro.
Ey Chuka, what is the best sharpest blade to use for edging up? I have the Andis GTX Modified blades from you and they hit sharp...however is there other blades that will do a better job than the GTX blades that i bought from you? If so, i may buy the blades from you so please lemme know your opinion about this. Thanks bro!!!
James Beal Umm. Not really. I personally prefer the modified t-outliners. They are the most popular of our blades. the gtx are great for long hair but also good for all around.
i bought your 10sec blade set and took me 1hour to get a good setup. the gap is to sharp for a client. i adjusted the styliner 2 setup so it wouldnt have a scratchy feel on a client. the 0 gap setup is horrible. if some one out there has the same problem comment. i dont whant my money back i just whant a fast good blade setter
MILLZx1986 Both blades will fit in the black or blue but the adjustments will come out slightly different because the blue had to be made to accommodate the third tension screw on the styliner II blades.
***** I bought one and it's hard as hell to get in the blade setter. Do I have a faulty one? because I still can't get the damn thing in... ughh frustrated.
***** Welp used pliers to get it in but when I tried to snap it out the whole thing broke. Well hopefully the seller I bought it from on Ebay is nice enough to give me another one. 10 bucks down the drain. :(
Hey I'm a barber in Dallas and I would like to speak to you about this product. I'm interested in becoming the brand ambassador. Shoot me an email with your contact info. I can make this product do numbers with my team. Give me a shout
U guys tell me the freakin difference between blue red and black I have the blue one if I have Andis-T liners...that's some bull crap😡that explains everything and I purchased the modified believe as well garbage
OMG. A non-barber like me not only modified my Andis Styliner I also was able to set the blade. I don't know a zero gap from a tooth gap, but It worked and my blades are cutting even better than before #winning :-) Thanks for two great products!
seems like when I adjust them with this product it seems the blade still shifts up I don't know if I'm doing something wrong but it seems after I adjust them correctly then out the blade back on and turn the clippers on the blades slides up, anybody have a solution to this problem?
@drueluvcolonge he shaved the top blade at a certain angle that gets a finer cut thus getting a sharper, crisper line. No one in the market has even thought of this, your a genius Chukka. Keep up the videos, man. Weather you believe it or not, your helping a lot of us in the game, out. Thanks Homie
Say Chuka I was on your website and wanted to know what makes your modified blades better than regular adjusting? I bought the andis zero setter I hate it and better off without it. What makes yours better?
I bought Chuka's blade setter for my Andis GTX edgers and after adjusting the blades it hits much cleaner and sharper than the original factory setting. I also bought his modified GTX blades from him as well and they hit even cleaner than the original blades. So my comment is coming from experiencing Chuka's blades firsthand. So hit up his website and order the modified blades and blade setter! You will be impressed!!!
I wanted to know if you are doing any type sets for any of the Oster T trimmer clippers for us cosmetologist / Barber, who use only that particular brand and I do like Andis to it just most of my clippers are Oster brand 76 clippers, fast speed clippers, 2 - other kind and 2 - T blade trimmers clippers (1- gold T blade and black clippers & 1- sliver T blade and burgandy clippers.) I still working on getting more clippers, but I try to only get the best on the first try out and this is with 3 clippers and trimmers being stolen and 1 clippers breaking on me no matter how many times I would pull it a part to fix it until I finally had to take it in to the professional man the that fix all problems I had only had them for a 1 1/2, (but letting people borrow them and drop them on the floor the most dreaded sound to hear, when they hit the floor I should have known better because they treat their own things like that & worst, but I know better and will never do it again, or allow it to happen to my things.) Besides, after paying for my clippers to be fix and sharpen they still did not work would cut and then start to glide over the hair and not cut anything, which would leave a patch of hair (hot mess) the they still did work, but unfortunately I couldn't put them in the trash I still have hope that I may can either fix them myself or get them fix by someone better. Please let me know about the adjustment for Oster clippers because that's all I have and if you don't have any type for trimmers can you please think of making 1 for the trimmer. Thank you, very much wish you all the best in you goal and dreams never give up on your life work, or dream God will always help, or set you in motion to put you either on a path to your dream / goal, or maybe to an even higher calling in your dream/ goal than you could ever imagine, so just pray and always be prepare for what's to come in the future and don't look back to the past God bless you wish all the best in life. (Sorry, for long message.)
I’m not a barber but I do try and shave my beard and to touch it up nicely by myself and I bought the blade sharpener from you and this adjuster. Looks like it sharpens everything aligns it properly. I never adjusted my Andis before, it’s still factory set. I will still adjust it. Thanks for making this. Just texted my barber your link.
Whats up Chuka,hopefully u having a good new year.I asked once before about you doing some comb-over videos.I have your dvd and it helps alot.If u dont have time to do comb -over videos do u have advice,thanks for your time.
It was a bitch trying to adjust the styleliner 2s blade..thanks for the helpful video bro ..just order me some blade setters from eBay for like $10 bucks each ..
+chukka Torres can you give us a full tutorial without fast forwarding it and you explaining in detail we are supporting you give us that we deserve it ;) Barber luv
This blade setter is a must have for all barbers!!! Quick,easy to use,and cost effective. I also purchased your modified outliner blade and I have no complaints!! Much respect for what you are doing coming all the way from Philly!!!
produca thanks bro!
I just got this blade setters from ur site and man they cut right on point, they don't cut the skin . just perfect and easy to do.
Thank you!!! I have been asking how do i get my blades close like the barber. No one gave me this part of the recipe. I appreciate the game!!!
Your amazing thank you for this information. I adjusted my GXT blade and it works much better. Thx you for being a leader in our industry I appreciate your craft and you videos. Although i'm not a barber I as Supercuts Stylist, so I hold a different license but I use clippers and edgers on all of my guest with the exception of women, I'm going to share your channel with all my girls. Thank you Chu
Jasmine Durgin Awesome! Thanks Jasmine!
I appreciate your product. It works real well. I brought two of them. The black & the blue ones. This save me alot from using the table & the mirror for adjusting my blade. This product is what it's says........... On The Money 💰 💰 💰 💰 💰 💰 💰 💰 💰 💰. I'll be doing a review soon on your product. Once again. Thank You.
Does it work for the andis pivot pro outliner the blade looks just like the second blade you put on there
Ive been using the T Outliner modified blades for about 4 or 5 month and they still hit hard. The best thing about these modified blades are that they do not cut the skin. Ive had my blades sharpened before at another place and for some reason the cut my skin up. For a blade to his as sharp as it does and not cut into the skin is mind boggling to me. Maybe its the modification.
Best $10 bucks I eva spent!
Ok, you put it on, put how did you a just it once you put the blade on?
Show what the perfect alignment is? Or does the Blue alignment peace automatically line the blazes up by itself once you put it on? 3n1
Just ordered up two fam!!!Didn't want to take my chances on the andis zero gapper.
RealismOfLife #salute
+RealismOfLife peace for having 1 of the most underapprecaited albums in your avy
Chuka Torres is there anything you've come up with to compensate for the deficiency of that nylon or plastic piece that sits on the still blade and keeps the moving blade in place? I make mention of this because I understand that these pieces as well as the blades themselves are mass produced and the efficiency of the product is compromised, at least from my present point of view,unless this particular issue is part of the design. Now what I'm refering to is the "unevenness" of this piece ,even if its a hair off,which one can gauge with a pair of callipers. it seems to me that no matter the adjustment one makes to zero - gap the blades, one can still push the blade and notice that it can rock or lift up on either side.I don't know if I am explaining this right,but you can notice it when your cutting and one side still "hits" harder than the other ,even though the blades have been set "perfectly " with a proposed tool specifically used to align the blade.Let me make clear that this is NOT a statement against any product of yours or your company friend. This is something that I've noticed and thought to share with you and see if maybe you guys can come up with a fix for this issue.I already can estimate the tedious approach to this,but I think it would be worth it for both the barber and client. Keep up the good work Chuka and your staff.
Noticed you mentioned a "Red" setter for Wahl blades. Can't find that color online.
I just adjusted my blades. When I put them back on guess clipper they were way to close and sharp. Tested them on myself just to make sure that the customer wouldn't get cut and they were way to close. Any ideas?
i have the andis styliner 2 blade setter it came with a razor the only thing is no matter how many times i set it one side always scraches? is it the tension screw
I purchased the wrong one off Amazon and I meant to buy the black one will the blue one still work on the andis t outliner? I don't want to waste time sending it back and buying another one.
how do you modify the andis blade to "Hit" harder...outside of zero gapping
Thanks JB I appreciate your input on this how long did it take for shipment to come in
I have wahl detailers,andis t outliners,and superliners. What all colors do I need to order???
The packaging on the Styliner II says "fixed T blade" as though it's not adjustable. Is this something new or has it always been that way? Just want to make sure I can zero gap them before buying.
did u zero gap them?
Do the Superliners work with the black 10sec setter?
Aight chuka finally got my on the money black. Question Where can i purchase modified andis trimmer blades? Thanks bro and thanks for replying before. Peace my bro.
Are these the same ones sold on Amazon and MD Barber?
BroboticTV Yes
The product is heat!
Is there a blade sitter for the Oster T Finisher blades ? Doe's anybody know any tricks to get the T finisher to hit proper ?
I would like to order one of them for my style liner 2 Where do I send The money to
Ey Chuka, what is the best sharpest blade to use for edging up? I have the Andis GTX Modified blades from you and they hit sharp...however is there other blades that will do a better job than the GTX blades that i bought from you? If so, i may buy the blades from you so please lemme know your opinion about this. Thanks bro!!!
James Beal Umm. Not really. I personally prefer the modified t-outliners. They are the most popular of our blades. the gtx are great for long hair but also good for all around.
+Chuka Torres what about the andis headliners? Would this blue Blade setter work for it to???
@@Mexican4everese the and is headliner has the same blades as the t outliner so the black blade setter
Do you still sell the Wahl detailer blade setter?
hey...do u do shipping to Trinidad?
yo chuka fam what about the barber brothers north of the border can we get a 10 second in Canada
Love it ..so easy ..thanks bro
Is there any that fit the old edjer 2?
Would the andis t outliner setter work with andis headliner
Yes
tell me how can I get the modified blades for t outliner if I live in colombia???
hugo pardo you live in Colombia?? you should be worrying about the drug cartel
i got the gold blade setter and it doesn't work on my andis gtx blades
Will it work on the Wahl 5 star detailers
i bought your 10sec blade set and took me 1hour to get a good setup. the gap is to sharp for a client. i adjusted the styliner 2 setup so it wouldnt have a scratchy feel on a client. the 0 gap setup is horrible. if some one out there has the same problem comment. i dont whant my money back i just whant a fast good blade setter
You can do this with the black one cause this one looks the same but just in a blue color
MILLZx1986 Both blades will fit in the black or blue but the adjustments will come out slightly different because the blue had to be made to accommodate the third tension screw on the styliner II blades.
I just got mine but is irritating on the neck area for the forehead is good but not for the neck
Can the t outliner blade fit in this blade setter?
Jesse Gray yes but the adjustment wont be as close as it will with the black one
***** I bought one and it's hard as hell to get in the blade setter. Do I have a faulty one? because I still can't get the damn thing in... ughh frustrated.
***** Welp used pliers to get it in but when I tried to snap it out the whole thing broke. Well hopefully the seller I bought it from on Ebay is nice enough to give me another one. 10 bucks down the drain. :(
Sorry about the misspell, drew.
Need 2 of those. Send me the link please
Edy Lobo link is in the video description
Thanks Chuka
On cool....
I don’t understand... the back blade is still loose
damn Chuka dem nails tho lol
Hey I'm a barber in Dallas and I would like to speak to you about this product. I'm interested in becoming the brand ambassador. Shoot me an email with your contact info. I can make this product do numbers with my team. Give me a shout
Why not just put it on a flat surface...like a mirror head down and check like you did with your thumbnail.?
U guys tell me the freakin difference between blue red and black I have the blue one if I have Andis-T liners...that's some bull crap😡that explains everything and I purchased the modified believe as well garbage
OMG. A non-barber like me not only modified my Andis Styliner I also was able to set the blade. I don't know a zero gap from a tooth gap, but It worked and my blades are cutting even better than before #winning :-) Thanks for two great products!
Question....will the Superliner blade work with the GTX blade setter?????
Blue I need you in my life 😊
seems like when I adjust them with this product it seems the blade still shifts up I don't know if I'm doing something wrong but it seems after I adjust them correctly then out the blade back on and turn the clippers on the blades slides up, anybody have a solution to this problem?
@drueluvcolonge he shaved the top blade at a certain angle that gets a finer cut thus getting a sharper, crisper line. No one in the market has even thought of this, your a genius Chukka. Keep up the videos, man. Weather you believe it or not, your helping a lot of us in the game, out. Thanks Homie
Isaac Perez I sure will. Thanks of the support Issac!
Thank you for the detailed info Perez
Say Chuka
I was on your website and wanted to know what makes your modified blades better than regular adjusting? I bought the andis zero setter I hate it and better off without it. What makes yours better?
I bought Chuka's blade setter for my Andis GTX edgers and after adjusting the blades it hits much cleaner and sharper than the original factory setting. I also bought his modified GTX blades from him as well and they hit even cleaner than the original blades. So my comment is coming from experiencing Chuka's blades firsthand. So hit up his website and order the modified blades and blade setter! You will be impressed!!!
James Beal Thanks James!
drewluvcologne They are modified by carefully removing some metal from the tip of the blade.
10$
I wanted to know if you are doing any type sets for any of the Oster T trimmer clippers for us cosmetologist / Barber, who use only that particular brand and I do like Andis to it just most of my clippers are Oster brand 76 clippers, fast speed clippers, 2 - other kind and 2 - T blade trimmers clippers (1- gold T blade and black clippers & 1- sliver T blade and burgandy clippers.) I still working on getting more clippers, but I try to only get the best on the first try out and this is with 3 clippers and trimmers being stolen and 1 clippers breaking on me no matter how many times I would pull it a part to fix it until I finally had to take it in to the professional man the that fix all problems I had only had them for a 1 1/2, (but letting people borrow them and drop them on the floor the most dreaded sound to hear, when they hit the floor I should have known better because they treat their own things like that & worst, but I know better and will never do it again, or allow it to happen to my things.) Besides, after paying for my clippers to be fix and sharpen they still did not work would cut and then start to glide over the hair and not cut anything, which would leave a patch of hair (hot mess) the they still did work, but unfortunately I couldn't put them in the trash I still have hope that I may can either fix them myself or get them fix by someone better. Please let me know about the adjustment for Oster clippers because that's all I have and if you don't have any type for trimmers can you please think of making 1 for the trimmer. Thank you, very much wish you all the best in you goal and dreams never give up on your life work, or dream God will always help, or set you in motion to put you either on a path to your dream / goal, or maybe to an even higher calling in your dream/ goal than you could ever imagine, so just pray and always be prepare for what's to come in the future and don't look back to the past God bless you wish all the best in life. (Sorry, for long message.)
I’m not a barber but I do try and shave my beard and to touch it up nicely by myself and I bought the blade sharpener from you and this adjuster. Looks like it sharpens everything aligns it properly. I never adjusted my Andis before, it’s still factory set. I will still adjust it. Thanks for making this. Just texted my barber your link.
Whats up Chuka,hopefully u having a good new year.I asked once before about you doing some comb-over videos.I have your dvd and it helps alot.If u dont have time to do comb -over videos do u have advice,thanks for your time.
It was a bitch trying to adjust the styleliner 2s blade..thanks for the helpful video bro ..just order me some blade setters from eBay for like $10 bucks each ..
+chukka Torres can you give us a full tutorial without fast forwarding it and you explaining in detail we are supporting you give us that we deserve it ;) Barber luv
Can you do a video on setting the style liner 2 I have the 10 sec blade setter I just can't get the it right just yet
Does it do the same thing as the zero gapper?? What is the difference bn the two?
Do you have a setter that works for the andis styliner m3?
Would the blue work for the t outliner blades as well?
Thank god it works for the super liners..
Where do I get this
How much does it cost?
Ernest Zeon 10
I bought one blade setter and did everything as said but when I use on the neck to line up beards it irritates ppl. What am I doing wrong?