Duke 390 14 Tooth VS 15 Tooth Sprocket (Stock) || KTM || DUKE 390 ||
Вставка
- Опубліковано 7 вер 2024
- Ktm Duke 390 Stock comes with 15 tooth sprocket.
I changed to 14 tooth sprocket , Which is from duke 250.
14 Tooth Sprocket Costs 198 rs in Bangalore.
----------------------------------------------------------------------------------------------------------
OUTRO MUSIC -
Unknown Brain - Superhero (feat. Chris Linton) [NCS Release]
www.youtube.co....
-----------------------------------------------------------------------------------------------------------
Do Subscribe to my channel . I will come with awesome videos.
Any Questions Comment below
thanks, ver helpfull for my data acceleration
Cheers dude ❤️.
Im happy that my video helped you ❤️❤️
Do subscribe and share ❤️
can i install rear chain sprocket of duke 200 in duke 390 to get low end torque in city riding , can any1 help me
Am planning to change it to 14T... Great info.. thanks
Excellent video thanks for video
Hey bro after using 14 teeth front sprocket did you noticed any difference? Has the ride quality improved? What about Jerkiness in slow speed ? Is that removed ?? Please reply
Not
Hi bro, i want asking now i using duke 250 2017 and the problem is, that time i go change sprocket set rear and front but that shop no stocks of size 46 then he tell me.. them only got 44, then i ask them back will got side affects or not to engine.. them say no..
But just now i wash my bike.. i see the size not 44, but is 43, and front sprocket is 15Z
And that will got affected to engine or not..
It wont affect on engine.
Im using 250 front sprocket on my duke 390 since a year. I can see improvement on mileage and acceleration as well
So whats the best sprocket to use for Duke 390 bro,Front and Rear for best performance to improve acceleration?
I would suggest if u some extra cash.
Go for Piggyback Ecu , its the best upgrade for performance. ( Note - Cant expect more engine life on this).
Upgrading rear sprocket also a better choice but still it will cost you some where btw 3.5k to 6k.
Upgrading front sprocket is budget friendly, you will get it for under 300rs and Initial power increases and gears will short as a result decrease in top speed and if you Cruze at 100 - 110 , excellent average of 32-34kmpl.
Hope this helps you.
Do subscribe and share ❤️
@@RevRides where do you buy sprockets seperately
Have you done 120 to 130 with dront sprocket change? How does it perform in 1st and 2nd gear?
Which front sprocket better for wheelie..13t or 14t bro
For wheelie we need more initial torque.
13t will be the best option.
I suggest keep front sprocket as stock and upgrade rear sprocket with bigger one like 47t or 49t.
Upgrading rear one with bigger sprocket you will get more torque compared to front one.
Its like 1:2 ratio. Stock front is 15t and rear is 47t so
U need to upgrade to 49t with 15t and ,47t is ok with 14t.
Hope this information helps you ❤️
Do subscribe and share ❤️❤️
Thank u brother..
Brother I have duke 250 I planed to change front sprocket 14 - 15 teeth sprocket but it's increase pull or top speed
@@RevRides thanks for this!
good video bro. You recommend 48t rear than 14t front for better torque, Can i ask why?
Small front and lager rear lowers your final drive ratio making the bike feel more powerful, while lowering it's top speed.
THANKS
Bro can i used in mt15
Im not sure for MT15 bro.
Do subscribe and share ❤️
I want 15 t and 13 T plz
15t comes stock with duke 390 nd Adv 3900 nd rc 390.
14t comes stock with Duke 250.
13t is too low , it may harm engine , It will change Gear Ratio.
Hope it helped you ❤️
Do subscribe and share 🤗❤️
@@RevRides bro where should I get 13t sporket?
I guess 390s will go from 0 to 100kmph under 6 sec right ? This took almost 7 to 8 secs....either a heavy rider or a slow launch ! The video was great tho !
Yes ur right
Bt i think launch is slow , need to practice that. I will improve. Thanks ♥️
Do subscribe and share ♥️
@@RevRides sure bro did ✌ keep doing good content
@@RevRides Make sure to change the gears before the red line. You will gain a feel milliseconds
With undergearing, you need more gearshifts to reach 100 kmph, around 3 to 4 shifts, vs 2 gearshifts on stock setup.
Gearshifts always cost you time.
So, undergearing always doesn't give better 0-100. 0-60 it might give better...
@@Samarth916 it can be negated with quick shifter to an extent tho..!! But yes.. A smaller rear sprocket will get the job done
Is this 14T sprocket the same part from Duke200?
Duke 250
Same i am planning to change, but worried about mileage, i heard that it will reduce.. 😭 How much mileage ur getting bro???
Properly I dint calculate.
But on dash its showing around 25-26 kmpl on city and 30-32 kmpl on highway.
But one con is that engine rev up fast compared to stock.
Hope you got some idea.
Do subscribe and share ♥️
Mileage will be less. I tried it already . Your engine is revving around 7k always.. you will get 23km/ltr
15T sprocket. From where we can buy it?
15T Sprocket is duke 390's stock sprocket.
You can get in any in KTM service center and cost around 200rs.
Do subscribe and share ❤️
Bro can we fit 390s 15t in duke 200?
@@ajaykrishna9044 No, their size is different
in first 0-130 u started late
Yes a bit.
Thanks for the comment, I ll improve that.
Do subscribe and share ♥️
bro i am planning to buy rc 200 bs6 wt should i do
@@kushgowda7240 I Suggest you to go for Duke 250 , its powerfull then RC 200 and comfortable too.
Take a test ride of both and decide.
tq beo
bro
Will 15t harm duke 250 bs6 ??
Its not harmful for engine or for clutch or for gearbox.
But you will miss that Initial Torque on 15t.
And You Cant ride Slow in higher gears.
Hope this info helps you ❤️.
Do subscribe and share ❤️
Bro i need 15 teeh where to buy
You will get 15 teeth sprocket in duke 390 as stock.