Useful Woodworking tips and skills. Easy way to get the perfect angle
Вставка
- Опубліковано 28 кві 2024
- Useful Woodworking tips and skills. Easy way to get the perfect angle. Woodworking ideas and projects. Woodworking ASMR. A Beginner's Guide to Woodworking. Carpenter Tips and Tricks
#shorts #diy #woodworking #tips #skills #carpenter #howto #project #idea #tools - Навчання та стиль
Если бы вспоминал все лайфхаки которые я просмотрел,я был гением,а как до дела доходит,ничего не помнишь😁
😂😂😂 right
That’s why you save them in a UA-cam Playlist 😂😂at least I do 🤷🏻♂️ 😂
Да и под рукой ничего нет
сначала купить весь инструмент... потом запомнить... потом чтоб пр годилось...
😂😂😂😂😂
Carpenters used to do this with nails before deck screws were invented.
Well what screws should he use???
Think he was saying that before mankind went to using screws to build....😊
И те гвозди ковал кузнец!
Still do this nails are still often preferred
Before cordless power drills made screws fast enough… they used nails.
Amazing, my first thought would be to push it with the bumper of my car.
😂
Lmao,nice
😳😁
No way, I was thinking more of using a bulldozer
This is why I come to the comments 😂
Next week: how to sweep floors with a jackhammer
I don't have a jackhammer will a rotaryhammer work?
@@nodemever3291нет мы им уже листья с участка убираем 😂😂
I dont have a floor will the ceiling work?
@@alexanderarmstrong8225 It's more important that you get a floor rather then worrying about a clean ceiling
japan: "you cut it wrong, do it again" - US: "hold it under tension, forever :)))"
One day you'll realise that everything is always under tension
@@leesparrow8637 My shoulders are under tension. I need a chiropractor. T.T
This is compression
@@Frankthegbcompression causes tension.
Lol & which one lasts longer?
*Nie chce nic mowic ale to wlasnie wy nakrecacie celebrytow ktorzy kupuja lajki na Realfollow*
Czym jest realfollow i o co wgl chodzi?
Людей не смеши
Как столбы из земли доставать умеешь
😅😅😅😮😅😅😅😅😅😅😮😅😅😅😅😅😅😅😅😅😅😅😅😮😅😅😅😅😅😅😮😅😅😅😅😮😅😅😮😮😅😅
Лекин фойда ли ок
Bob Vila would be proud
❤감사 함니다
If you keep using whitewood and sheetrock screws, you can expect to replace this every year
This
Is this a joke?
Круто
That's not white wood and those aren't dry walls screws. See how the thread only goes halfway up? Those are construction screws. See the grain on the right hand board? That's hard wood. He's just not in America.
They're not sheetrock screws, they're not threaded to the head. Try again keyboard warrior.
This becomes a stressed joint. I expect that the lateral 2x4 will e eventually split.
Yeah, you can also you know, just apply some pressure 😂
You mean push it in? Impossible!😅
no the board will warp to the desired shape. This is very common practice.
This is more than common, it's a daily occurrence on every build. Nothing will split or break.
Maybe but the fact that it did not split means it is wet and will be trained to be bent.
У черных саморезов и так головки ломаются из-за расширение дерева, а тут вы решили их под давление закручивать?) 🤣💪🏽
Ниче они не ломаются, сказочник... под давлением?🤷
стал замечать, что в подобных видео всегда такие вот деятели нарисовываются, лишь бы сказать, лишь бы сумничать попытаться. Такой бред несете
Это обычно, когда в комплекте с чем то, чёрные шурупы они ломаются. Например петля для двери их шурупы ломаются часто.
すごい😮知恵と技術があるってうらやましい✨
It helps to do it for a living,that when you develop these little tricks.
Those are sheetrock screws, they will fail soon.
@@glennredwine289 さま
本当にそうですね。たとえ収入につながらなくても、自分の身の周りのことを自分で解決できるのって自信が持てますよね。😊
@@ryangrimm9305 さま
なるほど、使う道具や材料も選んだ方が良いということですね。勉強になります。🌷
Whoever invented screws was a genius
Thank you kind sir
@@wakokaine6976 thank you sir, you truly are a blessing
John Screw invented the screw.
@@28toxicdavid38 I bet he screwed alot of people.
My mom invented the screw
I love tools and people who know how to use them
A hundred and uses for a pinch bar.
So you love the government? 🤣
tools love you too
You should see me use my tool
So you definitely don’t love this channel
Both boards are turned the wrong way. If you look at the end grain, they should be facing the other way toward the blocks
i realized the other issues with this (tension in the wood, potentially splitting it by drilling into the end grain, etc) but i was not aware that wood had a front and back side to the grain longways. if you have the time could you explain why that is? i love learning.
i think they are building temporary framing. by the gloves it could be masonry. you are right. but i don’t think they care
Interesting point, I’m not really experienced in the area so never considered the grain and how it would warp over time. 👍
Please can you explain this in more detail
Саморезы в торец бруса это для отвода глаз. Через некоторое время обязательно вырвет.
суть ролика как поджать доску а саморецы можно и под угом ввернуть
меня уже вырвало от таких лайхаков
Ни куда её не вырвет, дерево со временем само приобретёт такую форму.
Uma boa ideia para unir caibros.
@@AbuGadji-sw9xs похоже вы не в теме. Обратите внимание на расположение волокон в доске. Если вдоль волокон вкручивать (в торец), саморезу не за что цепляться.
Drywall screws again😔
You must love his videos that you know his screws. If it bothers, you don’t watch people like you is the problem with this world let the man rock.
@@emm6155 the videos keep popping up. I don't look for them. The issue with drywall screws is that they are thin, snap easily, not structural fixture and must not be used in construction apart from plasterboard/drywall installation. I've seen big structural failures where people used drywall screws for fastening timbers, plywood, even roof battens and tiles. Drywall screws only for drywall. This guy has good ideas but bad screws
@@emm6155 I’d say people like you are the problem with the world, don’t call out crap when you see it, now look at us!
Those aren’t drywall screws tho 😂😂😂
@@mrfxr1695the one he used as a anchor was a drywall screw the others aren’t
Reminds me of a dude I used to work with who thought he was brilliant. He'd still be explaining why it's better and I'd already be on the next one after my own complex strategy of pushing with my hand. You don't need to build a jig for every task. Sometimes you just gotta do it and move on
bro I hate yappers buddy would rather talk about it than get shit done
F-it, close enough. We gotta git-er-done!
Люблю смотреть народные мудрости! Спасибо
Черные саморезы + поперечная нагрузка = каждый год так будешь заново прикручивать
И доска витая!! Высыхает и опять выстреливает...
Если будет сухо, то норм... Чёрные (оксидированные) саморезы не = говно.
Чёрные, белые, жёлтые саморезы делаются из одной стали..Цвет-- это развод для тебе подобных)))
@@user-sw4hh2st4x они на поперечную нагрузку не годятся, лопаются
@@nikolasidoroff8530y vos como haces ?
Никогда так не делайте. При таком креплении саморезы будут испытывать постоянную нагрузку на срез и в итоге лопнут. Да и вообще каленый саморез не для дерева, используйте гвозди.
Ну да ,для дерева калёные саморезы не подойдут,а вот для травы самый раз,ну или для кирпича.
@@xyi-vam каленые саморезы хороши для монтажа легких конструкций и отделочных материалов внутри помещений, причем если надо закрепить на дереве другой материал, металл, гкл, гвл и т.д. Использовать их в наружных силовых и несущих конструкциях верх глупости.
No lo hagas como él ,piensa en otra solución,él solo te esta dando la idea.
А можно закрутить саморезами, а для верности ещё гвоздей набить!
Ну, справедливости ради, каленый там только в прихвате, временный, два фиксирующих - шурупы. Но гвоздь я бы добавил, крепить с натяжкой на шурупы, ну такое...
Еще один лайфхак - не использовать черные саморезы )
Отличный лайфхак!
Да да, сто раз да
I push on it with one hand
А что с ними не так?
He didn't, he just removed it.
Most amazing video on the internet. It actually makes the world a better place.
God took away my depression/Anxiety And has given me peace through the storm. He could do the same for you. If you're dealing with it or not. Know what it means to Repent & be Baptized. Jesus christ the living God is returning & he's the only way to heaven
🙏🔥 💯
@@stevenvialpando8365you are a first.
👏👏
Lmao wtf
Old masters 50 years ago connected wooden structures without self-tapping screws using so-called “Dowel joints”.
Well they wasted their time
If you bust out dowels clamps and wood glue on this project, better hope nobody's around cuz they're going to be laughing their ass off...
That's more like 100 years ago bro, 50 years ago was 1974. They had powertools and plenty of screws back then...
From what, from precise work?@@wtfbbqbye
And how long will the construction time be extended?
Using drywall screws was definitely a mistake.
Good insight 👍👍👍
Not drywall screws holding the timber. The One he pulls out is.
@@siwa7160, the screws he leaves in have a smooth shank, but don't look like structural screws.
Wood facing wrong way anyway
Где гипсокартон?
Essa prática e mais velha do que eu kkkkk. Já fiz mto isso qdo trabalhava em obras...
Those screws at interior drywall screws they’ll break in six months outside
Drywall screws don't have a shank. Nice try though
They won't break but they will rust out ovr 30 to 40 years
@@tedofuentes6525, course drywall screws have a shank.
@keithreckord4788 theyre just phosphate covered wood screws. Drywall screws come in 1 1/4 inch for 1/2and 5/ 8th drywall. and 1 5/8, and 2 inch screws are for double layer half and 5/8th, respectively. Anything larger is just a phoshate covered wood screw
those screws will out live you
I could've used that trick earlier today. To straighten one side of a long header. I'll be doing it tomorrow, if the lumber has a major crown to it. Thanks bro.
Use a 16 penny not a drywall screw those we’ll bend or break on ya
Dont screw into end wood. Put them in at an angle.
Holy shit! There hasn't been 1 million of these exact videos posted before?
ABSOLUTELY BRILLIANT 👏
Had to talk to a real carpenter to learn that one😂
I'm not a carpenter, but that's a cool trick! 😎 👍
No it's not, push it in with one hand and drill with the other and stop wasting time.
👍👍👍👍👍
No, you aren't - neither is OP. End screwing timbers is not woodworking. It's woodjerking.
I am not a trickster, but this is a nice carpet!
I'm not a filmmaker but this is a good video.
First thing you learn in everything you do with wood construction.👍🏽👊🏽💪🏽
To use dry wall screws in exterior?
@@dylanbyrne-pt6xkforce bad joints to hold long enough until the job is done and you got paid. 👍
@@NinjaSushi2 lol
Thank you … as a single pensioner who dabbles in home maintenance and improvement (with little to NO experience), little tips such as these are always welcome.
When the heck are you going to use this technique dabbling in your home? Maybe when you're building the bomb shelter you dug out under your rental.
Always predrill the hole a size smaller than the screw so the wood doesn't split when screwing in the screw
Rotting wood in 5,4,3,2,1.
not on the end, only on the side
so simple and so awesome..
единственный на самом деле полезный видос из миллиона подобных.. респект!
Благодарю 👋🤝 Рад что понравилось 👍❤️
Yes he is great so much for looking what you can do with fast time with out any problems to ❤❤❤❤❤
@@Tips_Workshopyes I love this video so much because it’s great job and so much easy to for any one doing that job ❤❤❤❤❤❤
He is a genius! 👍
mnostwo ludzi pisze o tym realfollow , ale przeciez nie ma nigdy pewnosci kto kupuje w takich sklepach a kto nie XD wiec ocb?
*tymczasem celebryci kupujacy lajki na Realfollow*
Полезные советы с деревом-на строй площадке запрещено использование калёных шурупов
Два навеса собраны на 'каленых шурупах',черных саморезах.
За 6 и 5 лет ничего нигде не лопнуло,не повело и не перекосило- зимой на них снеговые нагрузки.
Ещё раньше на чорных саморезах была собрана угловая полка под тяжёлый телевизор,и всё в порядке,пока его не заменили на панель.
Вообще много их было закручено- за всю жизнь их лопнувших припомню штук 5,длинные без сверления.Проблем не создало.
....может,вы все на них дубовые шпалы собираете?...
Похуй, не себе
Кем и почему???
Schräg einschrauben, mit der Faser hält das nicht lange, wenn es unter Spannung steht😊
At first I was like, what a dingus, that screw is pointless. Then I was like, “this guy’s a genius.”
I seen this no less than 100 times but it gets me every time.
Now you have a dirty hole in your timber face, and drywall screws that will snap in a couple of months
He didn't use drywall screws to fasten the wood together. Watch it again.
It's just a demonstration
You're always impressing with your knowledge and simple tips no one thinks of.
Thanks 🤝👋❤️
Trabalho bem feito.. wonderful..
Здорово очень придумано
Благодарю 👋🤝 ❤️
Я всегда одной рукой прижимаю а второй кручу
Next time, replace the "tool" with your hand and push it. XD
I will bet you would have used a handsaw to cut the boards and run the screws in by hand too…what a man! Probably mixed the mortar for the blocks in a pan with a hoe too…
@@johnrobertson7583, oh man, u never touch drill or other tools, is not it?)
@@johnrobertson7583 wtf, he pushed the board with his thumbs?! So why using a tool to push?! Useless workpart..
*OSHA:* 👁️ 👄 👁️
@@HYPERVENTiLiERT with 2 people it might work, but if you are by yourself, it's easier to hold it in place with minimal force and drill it straight.
I would just hold it in place with my other hand like 😅😅
Amazing how some fixes are so simple yet I would never think of them.
There could be only one thing worse, if he was to hammer the screws in. Please, the appropriate screw for the application!
¡Los tornillos NO se clavan, se atornillan!
If you’ve never used drywall screws in wood working then please keep your opinion to yourself
@@miguelangelperez7509 you’ve misunderstood. He said the only thing WORSE would be IF he had driven the screws with a hammer. He didn’t mean that’s the way it’s done
Uh. Also, don’t drive a screw directly into the end grain. It’ll hold for now, but thermal expansion and humidity will eventually split the grain around the fastener.
irrelevant to this video.
@@NewBrunswickOutdoorLife the video is of drilling a screw into the end grain. This comment could literally not be any more relevant to this video, and I was curious how it wasn't the top comment.
So then how would you screw two boards like this together?
@@HGrrrr pocket holes. Toe nailing. Corner brackets or braces.
Depends on what's easiest for you
@@ShawnPitman Pocket holes and toe-nailing go into end grain at a 10-15 degree angle. Try again.
Jenius 👍👍👍
Thanks 🤗🤝❤️
Should’ve drilled the nail in and split the wood
Век живи , век учись. Благодарю 👍👍👍
Век живи, век учись и всё равно дураком помрёшь😅
дураком умрешь. этим заканчивается поговорка
И в продолжение , а всё равно дураком помрешь. Как говорил мой Дядя.
Bien réfléchir avant d 'agir . gain de temps et bon travail . 😊😊😊
I didn't think people actually made videos of good tool advice. Thanks for proving me wrong😊
They don't could of just pushed it in by hand and screwed it like a normal person instead of wasting your time doing all this non sense
Those 2 screws holding everyones life together
That’s not structural
이렇게 나무가 휜 상태에서 이렇게 대충 박으면...
나중에 나사가 헐거워지면서 나무가 들뜨는 현상이 생기는거 아닌가?
Спасибо, очень полезно!
В чем польза ??? Тоже дом из газобетона будешь брусом стягивать ?)))
@@Hatori88100 про таких говорят - человек с узкими знаниями... а у меня широкий взгляд. Выровнять две перпендикулярные доски много где можно. Работай, брат и все будет в пользу
Эээто вряд ли😊
Запустить куда-то бригаду наемных работников без контроля- их работа НИКОГДА не пойдёт на пользу! 😂@@user-uw4yp8ug9f
Mitre joint ever heard of it, looks neater and prevents end grain being exposed to the elements.
Maybe the boards are going to be covered with something thatll keep them from being exposed to the elements.
Excellent excellent
INTELIGENTE
Thanks 🤗🤝❤️
Why are you using drywall screws for an exterior application
Prolly cause he doesn’t want to waste good screws on like a demo? Idk still kinda weird but I can sort of get it.
Doesn't even matter about the interior or exterior. It's the fact that it has no structural integrity
@isaacmai7961 but it's not just a demo. Plus, even if it was a demo, he could take the screws out and save them for later. And people on the internet will take things as they see them. So, if they see he used those screws, then they will use those screws as well.
@@Nameentered Not really bro. The screws will be worn in some way, even just slightly, by screwing and unscrewing them. And if the people on the internet don’t know how to do this, I will also bet that they couldn’t differentiate between different types of screws anyways.
The only drywall screw that was used was the one that he put in for leverage and took out. The other two are screws for structural purpose.
I'm an armchair carpenter, I'd rather NOT compromise the integrity of the wood by drilling an unnecessary hole in it.
Let alone place it under strain
Im a trained carpenter working in construction, i do not care😂
Im a real carpenter, we do this all the time
“I’m an armchair carpenter” … you should just stop there
I'm so excited about everyone catching the sarcasm that I threw in their direction 🤗
Всё гениальное просто!
Thats like the oldest trick in construction work
I can’t take anyone seriously who uses drywall screws like that
…or placing a screw into the end of a 2x4.
Люди, человеки 😏, эти шурупы только для лёгких внутренних отделочных работ, где нет сырости😊, для наружных работ и серьёзных нагрузок этого делать нельзя 🤔, ваш дом через год, два, весь начнёт разваливается, и этих роликов, и подобных тысячи в интернете, это очень плохой вариант и плохой пример для подрожания😊.
Где тут серьезные нагрузки? Да и откуда вода в вентфасаде (насколько я понимаю)?
Саморазрушение не держит по направлению волокон дерева, надо либо шпонку напротив самореза..
Я как специалист с 50 летним стажем, говорю что это все туфта.
да им и не нужны ваши советы. Оне сами всё знають...
😅
*sklep realfollow: potrzymaj mi piffko*
Смекалка это хорошее качество мастера, которая вырабатывается многолетним трудом, ...бесплатное пособие для молодых
Gotta love good honest work and craftsmanship❤
Thanks👋🤝❤️
Very nice!!! I'm gonna remember that!!!! 😲🤩👍👍👍♥️
Thanks 👋🤝 I'm glad you liked it 😊❤️
Keep it up with tricks..learning from you every time
凄い👏✨
そうやると、ちゃんと上手くできますね！
Amazing 👏👏👏
Мужик, это же гениально!!
I'm always surprised whenever I see the lack of strength framers have.
把每项最普通的工作做到极致，那就是艺术！
This helps me everyday
Шуруп в торец не держит
Rrhu
So satisfying.
super kreativ!!!
Now you have hole in the end which will allow water to seep in and rot the wood.
US cheap slapstick construction at its best. The emphasis is all on time and using the cheapest materials possible, not quality. LOL
It can be treated, filled or both
Whole piece is not treated so that’s not the case.
@@erhonni61 how can you possibly know that?
@@X737_ from the color of the wood…
Порою мы не догадываемся о простых вещах. Правильно говорят: век живи - век учись !!!
100%
Это точно💯👍🤝
Yes I love this video so much for this great job so much in this video ❤❤❤❤❤❤
Stainless steel screws son
Я всегда рукой прижимаю а второй кручу
Old School Tricks
very satisfying to watch
Только саморезы другие надо. Эти калёные ломаются со временем, особенно под давлением как здесь.😅
Только гвоздь.
дерево со временем привыкнет, а шурупу ничего не будет..
Genius 🧙♂️
if you think that's genius,,,you need to get out more
Temos coisas que a gente pensa,como nunca havia pensado nisso?
Muito bom .
Who's else watch it more than 20 times 😁😁
A worker with his whole life experience would laugh at this
Nu ar răde că e bine
I love that I just built a shitty fence 1x4 from Sweden and had a lot of bent material I made it work but your teaching I will implicate
I'm glad you liked it 👋🤝❤️ Good luck👍
プロかっけえよ、👏技術ってこれね。素晴らしい👏
Приблизительно так я собирао шкаф производства г. Пенза модель ШК603М! Мои родители за всю жизнь ни разу не сквернословили! Со сборкой мебели и наполнением от Икеа не было проблем!
Но тут я вспомнил детство и юность! У меня выросло несколько астральных рук, ног, крылев и мощных хвостов! Так-то я даже Шкафы Бэста от икеи усовершенствовал в части крепежа к стене! Но тут люди лет 50 лепят унылый товар, ни инструкций, ни сверловки, ни фрезовки! Как врагам! 😂😂😂 Я потом напишу писульку, этим пенсюкам пензюкам! 😂😂😂
Ребята! Порой простые решения приходят на ум легко! Просто надо дать врем им появится в голове! Всем удачи! ❤❤❤
Amei seu comentário, só deixar a cabeça esfriar !!!
Шкафы Икея, стоят крепко в собанном виде только прикрученные к стене. Попробуйте их переставить, и вы поймёте, что шкаф Икея развалился от небольшого передвижения в собранном виде. Дерьмошкаф Икея, это отстой. 😁😁😁
My dad had one of these axes and one day one of those hinges flew right off and hit me in the the eye when he was trying to bash my skull in. Him and I still laugh about it every day. RIP Dad.
Edit: I managed to post this on the wrong video but F it, I'm leaving it.
your dad sounds like a role model.. rip legend
Axe?
"Him and I still laugh about it every day. RIP Dad.
" bruh
@@RazanaArcclaw Daddy Axe
Loser 😀
Boa dica. Gostei! Tá de parabéns.
👋🤝❤️
Excelente ideia
Я не уверена, что брус не треснет в месте саморезов, при таком натяжении...
Maybe joists and decking will help?
Мало вероятно, что треснет. Древесина дуб достаточно прочная. Жалко что так ее используют. Тут и сосной бы обошлись...
Длиной саморезов можно решить конечно, но чтобы не напрягать древесину, я бы МШУ, 125 мм, с лепестковым кругом, потом вибро шлиф машинкой. Наверно вывел бы
A peça de madeira 🪵 (prancha) é flexível 💪🏽 e logo se adaptará com umidade e calor (se for o caso…🤷🏻♂️🪓🪚…!!)
@@user-lb8mw5in8q сам ты... ДУБ😂😂😂
Screws aside, my friend Mike showed me this. Has come in handy many times.
I just use my knee.