I tried following it like the teacher's video, but the problem is that if you pour silicone into the keycap on the back, it becomes too thick and becomes too thin when uvresin, so it rips. Is there a solution?
but how can you pour the casting agent there? I think this mold is made wrong. You need to do the bottom part (where the little + on the keys are with walls to be able to put those down and pour from the top.
You pour resin into the bigger part of the mold, then place the top part of the mold (as you described with the "little +") the excess resin will squeeze out of the mold, you could also put water into a mold like this to measure the volume. It would be very difficult to mold it in the way you described as the underside of the keycap needs to be perfect if you plan to actually use the keycap
@@pibifactory1726 kok saya pakai rtv 48 mold nya terlalu lengket ya tekstur nya setelah di campur katalis, saya pakai katalis cuma 3% dari rubber nya, sehingga susah buat cetak stem keycaps nya, jadi susah untuk cetak objek yang sulit om macam stem keycaps nya itu.
@@pibifactory1726 pas bikin cetakan kedua saya udah pakai easy release tapi mold nya menyatu, dan buka nya susah Di menit 2:40 itu bang, punya saya malah menyatu, padahal udah pakai easy release sama kaya abang
Apa itu cairan biru? Dan bahan apa yang Anda gunakan silikon sebelum melanjutkan ke langkah berikutnya ? english: What is blue liquid? And what material you scanned in silicone before moving on to the next step ? thank you
the blue liquid is Silicone Rubber, and what i apply before moving on to the next step is Easy Release. you can use easy release to make easier on unmold step
Thank you!!!
I search how to make KeycapsMolding like you.
Exactly perfect that I was looking for.
It’s amazing that’s what I’m looking for. Thank you so much your video.
Thank you so much for making this. Can you explain how you make the ones with the holes? The mold you used for your cloud keycaps?
I tried following it like the teacher's video, but the problem is that if you pour silicone into the keycap on the back, it becomes too thick and becomes too thin when uvresin, so it rips. Is there a solution?
Wow impressive stuff
Obrigada!!
2:07 most crucial and important step... don't pour silicone whole into cast, do like the video.
Have you used mount board of white colour on edges
What liquid are you using making it?
My silicon mold has the back arrow texture onto it. Is there are way to get rid of it? I don't feel like sanding down all my keycaps.
Do you put PBT inside the mold after?
It's probably for resin keycaps.
but how can you pour the casting agent there? I think this mold is made wrong.
You need to do the bottom part (where the little + on the keys are with walls to be able to put those down and pour from the top.
You pour resin into the bigger part of the mold, then place the top part of the mold (as you described with the "little +") the excess resin will squeeze out of the mold, you could also put water into a mold like this to measure the volume.
It would be very difficult to mold it in the way you described as the underside of the keycap needs to be perfect if you plan to actually use the keycap
what material is the mold made off?
coba bikin video tentang perhitungan bahan bahan yg di pakai untuk membuat molding bang
next video lurd
@@pibifactory1726 ntaps
Mas, ini nanti resin castingnya pake pressure pot gk?
bagusnya sih pake pressure pot mas
hi, how can i DIY the mold and resin keycaps for my Logitech G413 keyboard? susah nak cari keycaps untuk keyboard G413 :(
Roamer G kah?
@@pibifactory1726 yes yes! susah nak cari keycaps utknya :(
saya bisa bikin untuk mold nya
How to compute the hardener bro and the silicon?
check the description product you buy
how did you make those white plates?
Que materiales utiliza porfavor
Bang kalo buat keycaps kayak gitu keras gak keycapsnya?
ya keras bang sama kaya keycap pada umunya
How did you make those plates? What kind of plastic it is? Thank you ❤️
i make it using acrilyc using cnc machine
Sillicone rubber nya pakai rtv 48 bukan?
pas bikin video ini pake 52 saya, karnaa danya cuma itu
@@pibifactory1726 kok saya pakai rtv 48 mold nya terlalu lengket ya tekstur nya setelah di campur katalis, saya pakai katalis cuma 3% dari rubber nya, sehingga susah buat cetak stem keycaps nya, jadi susah untuk cetak objek yang sulit om macam stem keycaps nya itu.
lengket gimana bang? resinnya lengket ke cetakanya gitu kah?
@@pibifactory1726 pas bikin cetakan kedua saya udah pakai easy release tapi mold nya menyatu, dan buka nya susah
Di menit 2:40 itu bang, punya saya malah menyatu, padahal udah pakai easy release sama kaya abang
bang bahan yg warna coklat itu apa?
yang dipakai sebelum cetakan ke 2
itu anti lengket bang
itu dinding2 buat nahan resinnya sendiri yang di pasang di awal studio nyari / bikinnya darimana ya mas? trus yang easy release mold nyarinya dimana?
sebagian bikin sendiri mas, tapi kalo easy releasenya di onlen banyak mas
Apa itu cairan biru? Dan bahan apa yang Anda gunakan
silikon sebelum melanjutkan ke langkah berikutnya ?
english: What is blue liquid? And what material you scanned in
silicone before moving on to the next step ?
thank you
the blue liquid is Silicone Rubber, and what i apply before moving on to the next step is Easy Release.
you can use easy release to make easier on unmold step
@@pibifactory1726 oh, thank you very much
Mas, bikin tutorial yg font nya clear dong Mas, jadi RGB dan huruf keyboard keliatan
ok next projek mudah2an bisa bikin
Yay :D
Bang itu ngeringinnya pake pressure pot atau di diemin di udara terbuka doang?
didiemin aja bang, kalo pake press pot biayanya mahal
@@pibifactory1726 ouhh oke oke terus biasanya kalo silicon rubber gitu ada bubble nya juga gak kaya resin?
ada bang, lebih susah dihilangin malah
@@pibifactory1726 waduhhh cara ngilanginnya gimana ya bang? Bikin tutorial ny dong
pake vacuum chamber bisa hilang, tapi alatnya juga mahal
Kak molding nya beli di mana?
tokopedia.link/M5pAXrMcseb
toped ada kak
what is that product in 1:40?
that is Easy Release Mold
@@pibifactory1726 where do you find it at, can’t seem to find one that’s not a spray
www.smooth-on.com/product-line/ease-release/
Jualin dong bro
ada di tokped Pibi Factory bang
Bahannya namanya apa ya?
bahanya silicone rubber kak
Dimenit 0:01 dibawah keycaps ny itu apa bang?
yang mana bang
Itu yg langsung nempel di keycaps bang dimenit awal
oh, yang putih itu? itu buat dasarannya aja biar silikonya ga luber kemana mana, bisa pake clay, kayu, akrilik kaca dll