You should really do a full instructional. This gave me a really good idea how all this works and what I need to do, but having a bit more context would help. Awesome Vid though!
Ok, after 1 year of planning i have these tools: Good lighting ✅ Good table ✅ Acrylic paints ✅ Painting brushes ✅ Chavant NSP Hard clay ✅ Sculpting tools ✅ ZButt system ✅ Lego bricks ✅ 3 cups ✅ 3 sticks ✅ Gloves ✅ Respirator ✅ MoldStar30 ☑️ (soon) Epoxacast 690 ☑️ Ease Release 200 ☑️ Epoxy Resin Colors ☑️ Pressure Pot ❌ California AIR TOOLS 2010A air compressor ❌ I hope next year to have all required tools :D Before that also need to get information about resin casting, molds and so on..
temporarily switched to metal detecting.. but i still learning how to paint, this knowledge will help to create interesting colorful keycaps :) About pressure pot.. good manufacturer means safe work, so a little investitions must be made. Also a lot of useful information about keycaps i found in z-butt discord channel
Thanks foir the great tutorial and amazing Electro tracks (you Sir have great taste ! ) * goes back to dancing in the workshop to the sound of the video *
14:40 - whaaat????? What prevented you from using a syringe to pour the mix into a mold? you have a lot spilled by, and the whole process turned out to be dirty ...
Brilliant. Have you continued with this or was that just a one-off? What type of plastic is that you are using for the caps? How does it compare with ABS/PBT?
I mean why did u feel up the stem, better way to ask? Wanna sculpt top bottom and then mold just bottom part of key cap, its cherry mx stem, so should i fill up the + area of mx stem? Sry if this is confusing question, its confusing for me as well ,lol. Thx for video!
Great video, but I noticed you saying that you'd wear gloves on the sanding wheel at higher speeds, wouldn't that pose a risk of the material of the glove catching and causing greater injury?
I don't always mix things...
...but when I do, I do it with a drill press
You should really do a full instructional. This gave me a really good idea how all this works and what I need to do, but having a bit more context would help.
Awesome Vid though!
Great video, very helpful. Also, great music choice. I love Touch Sensitive and Chet Faker.
These are really gorgeous. I bet purple and space grey would look awesome!
And here I am living my life at 1 atm like a fool.
Ok, after 1 year of planning i have these tools:
Good lighting ✅
Good table ✅
Acrylic paints ✅
Painting brushes ✅
Chavant NSP Hard clay ✅
Sculpting tools ✅
ZButt system ✅
Lego bricks ✅
3 cups ✅
3 sticks ✅
Gloves ✅
Respirator ✅
MoldStar30 ☑️ (soon)
Epoxacast 690 ☑️
Ease Release 200 ☑️
Epoxy Resin Colors ☑️
Pressure Pot ❌
California AIR TOOLS 2010A air compressor ❌
I hope next year to have all required tools :D
Before that also need to get information about resin casting, molds and so on..
Have you already secured a pressure pot?
Where do you stand with this? I want to make keycaps too.
temporarily switched to metal detecting.. but i still learning how to paint, this knowledge will help to create interesting colorful keycaps :) About pressure pot.. good manufacturer means safe work, so a little investitions must be made. Also a lot of useful information about keycaps i found in z-butt discord channel
This is fantastic - really loving this.
dude these songs were my jam back in the day. Bloody pizza guy brought me way back. Then waveracer just slapped me in the face.
Thanks foir the great tutorial and amazing Electro tracks (you Sir have great taste ! )
* goes back to dancing in the workshop to the sound of the video *
could you make a cherry mx variant tutorial
dude
lol
Dude when they glowed in the dark it, blew my mind and you only had a 1 sec pic of that ha
And if you don’t have a pressure pot?
14:40 - whaaat????? What prevented you from using a syringe to pour the mix into a mold? you have a lot spilled by, and the whole process turned out to be dirty ...
dude. was this menthol? i really wanted that set. fucking dank
Awesome video. Add my voice to the chorus of, would absolutely love a truly instructional video with best practices in it.
Hi. Here's a question. With the transparent lid of the degassing chamber. What's the other chamber for?
Brilliant. Have you continued with this or was that just a one-off? What type of plastic is that you are using for the caps? How does it compare with ABS/PBT?
Can you 3dprint a mold for the q tips?
Great video
Nice work! What kind of glue did you use to glue the hole punch sticks in the silicone mold?
Is that just clay you used at the beginning?
Awesome! Do you sell artisan keycaps like those or others? Need one/some for my new Planck! Good job!
How did the bottom of the key fit on it looked like deformed did u drill it out or something?
I think he just sat it on the keeb for the video. They are not functional without a proper stem, such a waste of time.
this is beautiful!!!
Great job! Could you please tell me what kind of degas pressure pot are you using? Thank you in advance!
pizza guy, such a good song.
the song is so sick!!
hey! Can you pls explain why did u feel up the inside of switch, is that clay? Cheeers
I mean why did u feel up the stem, better way to ask? Wanna sculpt top bottom and then mold just bottom part of key cap, its cherry mx stem, so should i fill up the + area of mx stem? Sry if this is confusing question, its confusing for me as well ,lol. Thx for video!
Great video, but I noticed you saying that you'd wear gloves on the sanding wheel at higher speeds, wouldn't that pose a risk of the material of the glove catching and causing greater injury?
ASMR For Dogs leather gloves work just fine.
Agreed. Generally when working with any high RPM machine you don't wear gloves.
Source: have experience working in a machine shop
Please make more content!
Nice footage
Great video man! Where did you get that usb cord?
Awesome!!
Step 1. Buy a mold. Haha.
nice video, why do you vacuum the resin?
It's to pull all the dissolved gas and/or bubbles out of the mixture to allow for a good cast.
nice work!
do you sell this ?
that guy is crazy!!!!
Will this work with a cherry keycap?
Same exact process, except putting the sprue on the stem is a little trickier.
best value vac chamber huh? i wonder what else your purge with it? :P
nice vid doom
touch sensitive fuck yeah
pro job :D
Shoulda kissed me when u had the chance
the fucking music is mad annoying