It would of been nice to hear you ralk through the restoration , i have two or three of these of these cars waiting to be restored along with many more cars and trucks , one day i will get to them , I've just finished restoration on two Hpi savage trucks , a 25 and X both 4.6 egines .
I raced these as a younger fellow... made 3mm chassis plates from no parking signs. 6160 aluminium, believe it or not !! Countersunk them. All you did there was a clean-up. Not a resto. I had many GPM parts + Kyosho parts installed, Novarossi .12 motors, and cleaned up all of the slop in the suspension & steering linkages. Also, I ditched the Kyosho fuel tank for OFNA tanks, no primer, and a bronze diffuser at the outlet point. Your front shocks look like they came from an EP 3 electric version too. Pipes were Vantage, or HPI, which went better. The rear belt gets stripped from dummies doing donuts.
Hello. I'm searching for this green foam bumper for years. Was it only on this model? Would you know where I can purchase it or do you have the part number perhaps? Many thanks. RCCLL
Hi! I believe it is Kyosho 39401. Here's a listing I found but it's out of stock: www.hobbydirekt.de/sonstiges/sonstiges/Stossfaenger-Kyosho-39401::146179.html
yoo I'm trying to fix mine up I forget where I bought it from, but the wheels. When I try to move the wheels one is spinning the opposite direction of the other wheel, therefore it won't move. Suggestions??
That sounds like normal open differential operation, where if you spin a wheel forward, then the opposite side wheel spins the other direction. This doesn't actually occur when the car is on the ground and under its own power. Is this what you're seeing, or did I misunderstand your issue?
I have the same car, but I also have the "cooling fan" option and the belt snapped after 20 years. You can't find the belts anywhere and a "new" old fan kit is about 150 U.S.
Sur la notice de la GP-Spider MK2 World Cup ( C'est au format PDF : J'espère qu'il n'y a pas d'erreur dans le titre ... ) : L' échappement est de couleur noir, il est plus long et la sortie est latérale ). Par contre : Quelles versions disposaient de la boite de vitesse d'origine à part la World-Cup ? ( Il y a aussi l'option boite de vitesse disponible sous 2 références : L'option pour la Pure Ten Mantis car apparemment l'arbre change ... Et l'option FAW-001 ).
Yes it is. Quit being a fool. People have been cleaning carbon fiber long before you came on the scene. In case you don't know, carbon fiber is impervious to most liquids. 😢@@Ludo1986
@@Ludo1986yes it is. Quit being a fool. People have been cleaning carbon fiber long before you came on the scene. In case you didn't know, carbon fiber is impervious to many fluids and he wasn't using anything strong to clean it.😢
@@lowellfunk8974 I'm in RC hobby since 1997. Carbon fiber isn't protected on the slice. Every carbon fiber plate slice should be protected. PS : It's my job ...
![MERCEDES-BENZ 300SL 1/24 TAMIYA Model car build [Full version]](http://i.ytimg.com/vi/vFPOJY6gBrI/mqdefault.jpg)
![MERCEDES-BENZ 300SL 1/24 TAMIYA Model car build [Full version]](/img/tr.png)
My first hobby grade RC was a GP10. I still have it and plan on buying a used one off eBay to help restore it. Many hours of fun running that old car.
Very nice rebuild👍. My first nitro car was a Superten back in 1998. Great fan off Kyosho.
Very nice 👌
Love it,great job my friend!
That's another nice kyosho you've got there quite hard to find this version anywhere congratulations on acquiring it 👍
Awesome Restoration to a badass oldschool car man! You rock! NitroGang !!!!
Thank you!!
very nice rebuild👍 missed mine❤
It would of been nice to hear you ralk through the restoration , i have two or three of these of these cars waiting to be restored along with many more cars and trucks , one day i will get to them , I've just finished restoration on two Hpi savage trucks , a 25 and X both 4.6 egines .
Wow 😲 impresionante eso es tener estilo y presicion para desarmar y armar un modelo de esos de combustión interna
I raced these as a younger fellow... made 3mm chassis plates from no parking signs. 6160 aluminium, believe it or not !! Countersunk them. All you did there was a clean-up. Not a resto. I had many GPM parts + Kyosho parts installed, Novarossi .12 motors, and cleaned up all of the slop in the suspension & steering linkages. Also, I ditched the Kyosho fuel tank for OFNA tanks, no primer, and a bronze diffuser at the outlet point. Your front shocks look like they came from an EP 3 electric version too. Pipes were Vantage, or HPI, which went better. The rear belt gets stripped from dummies doing donuts.
What cleaner are you spraying these parts with? Want to restore my HPI Racer 2 now….those were the days indeed!
Hello. I'm searching for this green foam bumper for years. Was it only on this model? Would you know where I can purchase it or do you have the part number perhaps? Many thanks. RCCLL
Hi! I believe it is Kyosho 39401. Here's a listing I found but it's out of stock: www.hobbydirekt.de/sonstiges/sonstiges/Stossfaenger-Kyosho-39401::146179.html
@@back2newrc Thanks so much, lovely, I'll find it :-) Enjoy RC
What Grease you use for lubrification?
I use Loctite 234227 moly paste in the gear diffs. You can find it here: amzn.to/3NNFGjv
yoo I'm trying to fix mine up I forget where I bought it from, but the wheels. When I try to move the wheels one is spinning the opposite direction of the other wheel, therefore it won't move. Suggestions??
That sounds like normal open differential operation, where if you spin a wheel forward, then the opposite side wheel spins the other direction. This doesn't actually occur when the car is on the ground and under its own power. Is this what you're seeing, or did I misunderstand your issue?
I have the same car, but I also have the "cooling fan" option and the belt snapped after 20 years. You can't find the belts anywhere and a "new" old fan kit is about 150 U.S.
Oh no! I wonder if a large o-ring might work? I haven't seen one of those fan systems in person so I'm not familiar with what was used as a belt.
Can anyone send me the link for a replacement of the Pull Start, mine needs a replacement but I think I ordered the wrong one.
Which engine do you have?
any one know the factory setting on the carb for this car i
I never would by such a kyosho 10-scaler, because of that belt drives...
Can you tell me the name of the motor please ?
how much is it worth restored?
Used but nice ones like this are between $250-350 and perfect/NIB ones are between $600-800.
i specialize in rc restoration
La culasse du moteur est bleu normalement sur la World Cup.
Sur la notice de la GP-Spider MK2 World Cup ( C'est au format PDF : J'espère qu'il n'y a pas d'erreur dans le titre ... ) : L' échappement est de couleur noir, il est plus long et la sortie est latérale ).
Par contre : Quelles versions disposaient de la boite de vitesse d'origine à part la World-Cup ?
( Il y a aussi l'option boite de vitesse disponible sous 2 références : L'option pour la Pure Ten Mantis car apparemment l'arbre change ... Et l'option FAW-001 ).
アメージング！
Is nitro Jones
Oh my god, poor Mk2 ! Never put carbon fiber in liquid ! And also cleaning the chassis without disassembling all the parts ... Poor car.
Nah man, it's fine.
@@back2newrc Absolutely not .
Yes it is. Quit being a fool. People have been cleaning carbon fiber long before you came on the scene. In case you don't know, carbon fiber is impervious to most liquids. 😢@@Ludo1986
@@Ludo1986yes it is. Quit being a fool. People have been cleaning carbon fiber long before you came on the scene. In case you didn't know, carbon fiber is impervious to many fluids and he wasn't using anything strong to clean it.😢
@@lowellfunk8974 I'm in RC hobby since 1997. Carbon fiber isn't protected on the slice. Every carbon fiber plate slice should be protected. PS : It's my job ...
Not God . Sory