Hi ,Archie can hear your voice &is running round looking for you & he can hear Rocky hes had 2 walks so far ,got woken up @05 15 am with a kiss how lucky am I
There’s a spare switched feed terminal block in the rear drivers pillar about 1/4 of the way up. This is linked to the reverse light circuit. Connect the camera to this by cutting off the connector and run a 2 core in parallel to the monitor. Will switch camera and monitor on when engaging reverse.
I put the brake light in this morning but it’s bolts that come with this one is awful. I used PVC piping with a slot in it to tighten the wing nuts because my big fingers couldn’t fit....
@@PackTheVanAndGo yeah, while I was installing the MaxxFan, I put in the same reverse camera light... camera not yet connected. I am waiting for some 7 core cable to arrive so I can future proof the camera cabling...
Hey there, great vid! Exactly what I need… have you had any issues with these devices being attached to what is effectively a constant live circuit? Eg that interior light is live even when the ignition is not on, same for the unused cable you found in the fuse box, so am I right in thinking the camera will always draw a current even when the ignition is off? And that you need to remember to turn the screen off when you park up? Have you had any flat battery issues?!?
@@PackTheVanAndGo nice, good to know! I guess it’s unlikely to be a prob if you use your van regularly… if you don’t mind me asking what’s the longest you’ve gone without starting the van since installing it?
Good video here mate. Liam is an absolute treasure. Love their channel. Van is coming along nicely. Scotland awaits (COVID-19 allowing). Take care. Mal and Dave in Stoke
Hi ,Archie can hear your voice &is running round looking for you & he can hear Rocky hes had 2 walks so far ,got woken up @05 15 am with a kiss how lucky am I
Big hugs to you both xx
There’s a spare switched feed terminal block in the rear drivers pillar about 1/4 of the way up. This is linked to the reverse light circuit. Connect the camera to this by cutting off the connector and run a 2 core in parallel to the monitor. Will switch camera and monitor on when engaging reverse.
Amazing many thanks for your advice mate
It’s the black connector with yellow band on it. Light gauge wiring. 17 reg boxer
@@paulmaddison7241 Amazing, thank you for all the help and advice!
I put the brake light in this morning but it’s bolts that come with this one is awful. I used PVC piping with a slot in it to tighten the wing nuts because my big fingers couldn’t fit....
Is that a reversing light you fitted Bruce?
@@PackTheVanAndGo yeah, while I was installing the MaxxFan, I put in the same reverse camera light... camera not yet connected. I am waiting for some 7 core cable to arrive so I can future proof the camera cabling...
What time can I book my Peugeot in for the electrics?
Ha ha, you’ll have to go message him on his channel he said?
@@PackTheVanAndGo - when I can get through the minefield of batteries and actually decide on a set, I may need help
@@BruceLauderdale he’s the man in the know... my Victron gear is now all set up and can access via Bluetooth
Hey there, great vid! Exactly what I need… have you had any issues with these devices being attached to what is effectively a constant live circuit? Eg that interior light is live even when the ignition is not on, same for the unused cable you found in the fuse box, so am I right in thinking the camera will always draw a current even when the ignition is off? And that you need to remember to turn the screen off when you park up? Have you had any flat battery issues?!?
Hi, never had any issues, never had a flat battery since being installed and yes, you need to turn switch and turn off the reversing camera to use!
@@PackTheVanAndGo nice, good to know! I guess it’s unlikely to be a prob if you use your van regularly… if you don’t mind me asking what’s the longest you’ve gone without starting the van since installing it?
Good video here mate. Liam is an absolute treasure. Love their channel. Van is coming along nicely. Scotland awaits (COVID-19 allowing). Take care. Mal and Dave in Stoke
He’s a legend hey! Hope you guys are well?
Archie And Me we are mate. Keep up the excellent vids
What camera was this sorry? How have you been getting on with it?
I found it on Ebay mate.. fit a Peugeot Boxer
Top job guys 👌🏻
Thanks you... hope you’re well?
@@PackTheVanAndGo yes bud doing well thanks, you and Archie doing well 👍🏻
claretbuck1882 Archie is having a great time away at my moms and I’m working on the van with no dog distractions 😂😳
@@PackTheVanAndGo good to hear bud no distractions just what you need when tackling the dreaded electrics 👍🏻
@@claretbuck1882 almost all done now
Def need one of them bro 👍
Yeah you do bro!
💙.
How are you my friend? Where are you now?
These are terrible quality
Yeah it’s been removed and an Auto Vox fitted.