Motor Mounts Replacement on 1998 Saturn sc2
Вставка
- Опубліковано 6 вер 2024
- Replacing the motor mounts on a 1998 saturn sc2. Footage ended up being too blurry for the passenger top motor mount replacement but that is the simplest one and I'm sure there are plenty of videos out there for that specific mount. Ended up replacing the two passenger mounts and the dog bone mount on the driver side, but not the transmission mount.
Bad Motor Mount Symptoms I experienced:
Car rattled like crazy, specifically on the passenger side
Car rattled so bad the coolant reservoir cap became loose and coolant leaked out.
Great video. I was dreading replacing my motor mounts. But your video gave me hope. Good Job.
Thanks for watching!
Good video man.
Jack the trans up a small amount and the mount can come out. Don't forget to loosen the dog bone bracket bolts at the frame after you're done; let it settle, and retighten. Do both.
Use jack stands ppl
Great video….Ok, out of curiosity, since you replaced those engine mounts 2 years ago, how are the holding up today? Has the vibrations returned, condition of the mounts? TIA
Unfortunately this car was sold a few months after this video
Dog bone mounts same between left and right side ?
Could rattling noises when idling be the motor mount? A guy said my motor mount is rubbing? Causing the rattle noises...
That’s the same symptom that led me to replacing the motor mounts here
What’s the torque specs…
There’s a bracket above it take that off and it slides right out a lot of people don’t know this
Is this referring to the trans motor mount?
Only came here for the trans Mount, and that’s the one you didn’t touch. Dam
Ah my bad lol
I did the three motor mounts, then decided later to do the trans mount as well. I had to unbolt all three of the other mounts to lift the motor high enough to get the trans mount out. Thank you Saturn for making the other three easy to get to.
@@handyatmusic did you do them because of dash rattles? did it solve your dash rattle issues?
@@DaBossk Yes, the whole car was rattling badly and noisily, and motor mounts solved it.
😀
;