Pure chlor Replacement Salt Cell

Поділитися
Вставка
  • Опубліковано 20 гру 2024

КОМЕНТАРІ • 36

  • @DanielBrandeis
    @DanielBrandeis 6 місяців тому

    What’s the name of the tool used to loosen and tighten the cell?

    • @englandandy5181
      @englandandy5181 6 місяців тому

      It's an oil filter wrench. Cost less than $10. you could probably pick one up even cheaper at Harbor freight

  • @jonrobinson5354
    @jonrobinson5354 2 роки тому +1

    Hand tightening should work as long as the o-ring are in place. Mine doesn't leak.

  • @scottclark7740
    @scottclark7740 3 роки тому +1

    Thanks for the instructions. Done!

  • @Watermelonysha
    @Watermelonysha Рік тому +1

    Anyone know if I can replace the purechlor salt cell with intellichlor salt cell without having to change the plumbing?

    • @EnglandAndy
      @EnglandAndy  Рік тому +1

      I just got rid of solaxx salt system and replaced it with circupool salt system. I did a video on it, Now, with circupool you don't need to change the plumbing if you flow valve is 6 inches away from your filter. Mine wasn't .

  • @justinreynolds3935
    @justinreynolds3935 2 роки тому

    Just curious why you open your relief valve for so long and waste water. As soon as water comes out it is primed. Just fyi.

    • @EnglandAndy
      @EnglandAndy  2 роки тому

      If I don’t bleed it through then the pool keeps bubbling

  • @theDonRua
    @theDonRua 2 роки тому +1

    I went to the mypurecholor site.
    1) it is a pitiful, 80's style low info site. Almost no attention to user service or support.
    2) I did not find any instructions, youtube videos, or downloads to do this critical step of resetting the cell.
    This lack of care for their customers and product is appaling. A hing school intern could cut a youtube video or type up the steps to reset it, but they are not willing to pay $50 to get it done and up on their site. It's atrocious. I don't know why anyone would resell this brand, or buy this brand, if the company has so little care for service.
    Props to England Andy, doing hella more than the manufacturer has done to help pool owners.

  • @rezaadhitiya3914
    @rezaadhitiya3914 2 роки тому

    I don't get the reset procedure, would you so be kind to share please

    • @EnglandAndy
      @EnglandAndy  2 роки тому

      TBH I don't remember. The instructions I got were garbage and that's why I phoned them

    • @johnmurphy6366
      @johnmurphy6366 Рік тому

      Better off calling,they’re very accommodating

  • @EnglandAndy
    @EnglandAndy  5 років тому +3

    Yes I did , The company is Solaxx and they are based in Daytona ,Florida. I wasn't even sure of the one I needed because it wasn't on there website( which is crap by the way) and they told me which one I needed. If your cell died before 5 Years then you will get a 40% discount and if it was within 2 years I think it was 60? He didn't ask for proof unless it was already registered when it was built.
    But all in I paid with ship and tax around $480 which isn't that bad. www.mypurechlor.com/system
    Hope this helps

    • @MT-lv7xn
      @MT-lv7xn 4 роки тому

      I'm doing the same for my pool could you tell me the sequence they told you over the phone

    • @MT-lv7xn
      @MT-lv7xn 4 роки тому

      I added it and I'm getting salt cell light flashing. Didn't get the instructions and they are closed on weekends

    • @EnglandAndy
      @EnglandAndy  4 роки тому

      @@MT-lv7xn You know , I really can't remember but if you phone solax they will guide you through it because the paper instruction are garbage.

    • @MT-lv7xn
      @MT-lv7xn 4 роки тому

      @@EnglandAndy thank you

    • @EnglandAndy
      @EnglandAndy  4 роки тому

      @@MT-lv7xn I have just been on there website and there is a trouble shooting section and if you can't wait till Monday when they are open you can try to do it through the trouble shoot section and maybe watch my video at the same time.

  • @kreed1004
    @kreed1004 4 роки тому +2

    I just paid about 270 or so for same, from Salt Pool Store, AUS. Including shipping. Plug and play same filter different brand replacement. Warrantied

    • @EnglandAndy
      @EnglandAndy  4 роки тому

      Good deal, a lot cheaper than what I paid.

    • @samdavis6591
      @samdavis6591 4 роки тому +2

      I bought one from that salt store havent recieved yet now I've read they have horrible customer service and won't stand behind warranty never answer phone or emails

    • @EnglandAndy
      @EnglandAndy  4 роки тому +1

      @@samdavis6591 I get it, you try and save money and still get screwed but you can still dispute it with you cc company.

  • @CarlosTerc
    @CarlosTerc Рік тому +1

    Have replaced cell 3 times in less than 3 years.Horrible customer service. D
    RATED.

    • @EnglandAndy
      @EnglandAndy  Рік тому

      I have got rid of it for the same reasons I now have circumpol and so far seem to be doing fine and the best bit is that the fittings are the same

  • @jonrobinson5354
    @jonrobinson5354 2 роки тому

    You might want to check you pump, it should not be that loud.

  • @DanielBrandeis
    @DanielBrandeis 6 місяців тому

    What’s the name of the tool used to loosen and tighten the cell?