My absolute favourite UA-cam woodworker. I am humbled in the presence of such greatness. Words fail me. Its like everything I thought I ever knew pales in comparison. I am not worthy to witness such greatness yet something draws me back, an irresistible pull. Many have tried but none can match that exquisite quintessence of all that makes the Wandel woodshop special. Nobody Does Bandsaw like Matthias. He is the God emperor of bandsaw wisdom. His competitors are as dust and ashes in comparison. Teach me Lord Mathias in your ways. I will no longer fear those who dare to question your word. Stand back you dogs ! Speak to us master.
There is a very good video here called "Bandsaw Clinic with Alex Snodgrass" . It is the best tutorial that I have ever seen. In it he explains why planar alignment of the wheels is not important. They are designed to be out of alignment. Having said that, congratulations on the good video and the work that you have done in improving this machine.
I always learn so much from your videos no matter what the project is you are working on. Your intelligent approach to problem solving as well as your pragmatic approach to getting the job done is inspiring
I have a cheap bandsaw that needed a new tire but it is not worth the $30 + shipping to buy "proper" replacements. I went to our local thrift store and purchased solid leather belts to make tires the "old fashioned way" (?). The leather was 5/32" thick and the belts were $1.00 each. I can get two tires strips from one belt and I cut them to fit between the ridges of my band saw wheels. I glued the leather tire to the rim with a silicone type adhesive (Shoe Goop), rolled the rim so that the tire laid evenly around the rim, taped it to hold everything in place and left it 24 hours. I then installed and tested and it worked great. I did not bother crowning as the other wheel is crowned and it was easy to track as is. Time will tell if all stays well but the repair was cheap and easy and that is what I wanted..
I also received a small cheap band saw for free because my uncle found it to be more trouble than its worth. thanks to you its running very well now, looking at all your videos gave me excellent insight into how these tings should work. For the pulley tires i just used a hard leather strip which i milled into a crown and that seemed to work well.
I have never done any type work that relates to your videos (I'm a scientist), but for some reason I enjoy watching them. I've been subscribed for over a year now and I still get happy when I see your videos pop up in my subscription box.
Finally, after all these years, I finally found someone more meticulous than myself. Enjoyed watching you work. I like the precision you strive for. Keep up the good work, and thank you for the video.
I wasn't looking for such a good education, but I got it anyway! Excellent breakdown of all the parts of a simple bandsaw... much easier to see the things that can go out of whack. Thanks!
another thing that would have worked good for removing some material on the wheel would be a thin strip of emery cloth(or even some sand paper on a wood block pushed in there), being an aluminum wheel its soft enough to sand down. Matthias you are a true icon in the field of fixing and re-purposing tools to make a more accurate instrument. truly something that has been lost it seems over generations as todays society says "if it doesnt work right throw it out!".
I just used your tip on electrical tape to fix my bandsaw. I picked up a larger saw for free but it had no tires and no motor. I have plenty of adjustment travel so the number of wraps was not critical (it runs a 78 inch blade). Even so, I used three wraps and it works great! I also have the same saw in your video made by Ryobi - another freebie from a retiring co-worker. He used silicone to make his own bandsaw tires.
I just got a three wheel 16" Delta band saw ( cast iron frame ) and after I found some tires for it I found it set up really well. I had one of those band saws from CT...I'm happy to say I chucket in the garbage. I enjoy your videos Thanks
this was one of the most fun and awesome videos I've seen regarding refurbishing power tools. I got the 9 inch Mastercraft at a garage sale this weekend and it had poor and busted tires. Going to try the electrical tape tomorrow Very nice vid!
I have a bandsaw that my dad left me when he moved to Az. and it's missing that bottom wheel rubber piece, I'm going to try that with the tape. Thanks for that idea. On a different note, after seeing this video, I decided to check out my other bandsaw that looks like the one you have here. It never seemed to cut right and I discovered that about 3yrs ago I had put the blade on with theeth facing the wrong direction, points up, not down. Cuts great now. Thanks for the video... LOL.
Loved the tuneup. I have a ten inch Sears that could use a tuneup just like this. Just a tip for the shim you mounted. A touch of thick grease or vaseline will stick the shim for truly blind spots making it a lot easier to deal with. Great vid!
Hi 12345NoNamesLeft, I agree. I've made aluminum washers just as you've described several times in the past. Very stable and works great. Matthias is a UA-cam icon, no doubt. But, I have to say this... The process he used to remove metal from the lower pulley/wheel on the band saw is called "Turning", not Milling as he stated in the video. His first attempt at turning is called "Gouging". ;o)
Thanks for clearing that up. The squishiness makes the tape not suitable (it's under constant pressure when the bandsaw is stopped), and the price not cost effective.
Someone dumped one of those behind our warehouse and the only thing wrong with it ' was the lower wheel belt like yours. I have a 12" band saw so I make my craftsman into a 1" belt sander which woks amazingly well. I may modify it so I can use bigger belts and cut them into 1" strips (saves money). Always enjoy your videos. Cheers
Thanks, I learned from this video. I recently purchased a 10" Craftsman Band Saw at a yard sale. It works but I seem to throw the blade easily. After watching this video, I went out to the garage and examined the blade guides. The lower guide had the left side completely missing and the right one loose. That explains that problem. Now to replace the blade with more set so I can make tighter curves. Thanks!
wow, the cutting tool incident scared me slightly. but hats off to you sir, you put a lot of time and effort into getting the saw to run correctly. thank you for the suggestions and ideas to tune up my P.O.S. Ryobi 9inch(22.86 cm) band saw.
Totally love your videos. For getting the wheel running perfectly round you should consider using a grinding attachment for a dremel (or similar) and grind the surface while the wheel is spinning. That should eliminate the wobble almost completly.
He is talking about "tooth set". If you look at most saw blades, the teeth protrude out of the plane of the blade body. This has advantages by clearing chips, and preventing heat build-up from friction as the blade body passes through the wood. It also allows for curves to be cut, since the set of the tooth allows it. Since "tooth set" increases the width of the cut, and hence the load on the motor, saws this small often don't have much tooth set on their blades.
you can put your plastic "shim/washer" material between two pieces of wood and drill straight through instead of using the hole puncher....just an after thought.
when you go to mount the motor with the upper bolts holding your shims, use two long studs in the bottom holes to start your motor in alignment in the bottom holes and it will all lign up. if you had to shim in any other plane use the longer bolts in the un shimmed holes. best of luck Matthias!
The tape he's talking about, (I think), is actually silicone. I use it for taping up a florescent bulb I use at work. I've found when electrical tape gets hot the adhesive lets go and creates a gummy mess when you try to re-tape it. So if heats a concern for you it's worth considering. I've seen it for $10 - $20 a roll from Uline, or MSC It is thick and squishy so the blade may dig into it and shred the tape though.
I believe RentAnEducation means self vulcanising tape. You stretch it and it starts vulcanizing (rubber starts polymerizing) and so becomes one solid body. I have used it to cover mast spreader screws with great success
This was a very useful video as I have a bandsaw almost identical to yours. The biggest problem with this is that it never cuts in a straight line but always veers off at an angle. Any thoughts on why it might be doing this would be great, I have ordered a wider blade to see if that solve the problem.
+B0M0A0K Check the blade tension. There is a blade tensioning video on youtube that tells how yo "pluck" a blade, and tell tension by the tone that is produced. Also, drift is caused by a blade worn on one side, from hitting metal in the wood or by misalignment of the guide inserts. Adjust the inserts and try a new blade.
I have a simpler size bandsaw with same problem. Solution is to aline the blade so it tracks 90 to the wheel. The guides also have to be at the same angle.
I am unfamiliar with Harbor Freight Company, but Canadian Tire is a kind of general tool, Automotive, and Hardware store. They specialize in Automotive parts, Tools for automotive and Woodworking craft, Plumbing and Electrical, Kitchen Wares, Gardening stuff, Fishing, Hunting and Outdoor activities. Kind of a generalist place thought, nothing exceptionally high quality, a moderate selection, and they don't sell major building materials. It's a good place for the average handyman to go.
Just one constructive criticism Matthias. Your use of the puller was incorrect. You should tighten the screw, then tap the end of it to break the hold. To keep on winding the screw with the wrench, risks damaging the motor shaft. The video was entertaining and informative as always.
I also did all you have done and more. That 3 screws are not enough or not needed. It's a real bad design though I did use it for years for aluminum mainly. I also removed the 3 6 mm bolts and made a new shaft with a wider spacer. No matter what I do, I rum out of patient before I fix it. May be its time to buy a better one.
Harbor Freight in US is more like Princess Auto in Canada. Canadian tire is leaning more towards housewares and general merchandise, more like Sears now than the hardware store it started as .
nice vid! I just bought a mastercraft 6'' jointer on sale for 150. The tables are not adjustable other than hieght for the infeed, and they aren't completely parallel. There is only one corner that is high by about 1\32''. I end up planing the first half then nothing at the end, (like a wedge.) Im thinking about sanding down the bad spot. I always feel like I'm playing the lottery with buying stuff at CT, but Ive won a few times lol..
There was a screw hole on the bandsaw case adkacent to where you were using the cutter head. If you had mounted a bolt at that location, it would have made a nice tool rest.
We were using duct tape as a tire for a 8ft blade bandsaw for about 6 months. Its however a metal sheet cutting bandsaw so it only spins at about 130-175sfpm. It was fine though .
You were doing everything perfect, I was amazed that you do it like that, using the correct tools and then laziness comes around 7:38, nice videos man, I admire the way you work, greetings form Mexico.
Late comment, but I wonder if self-almalgimating electrical tape would be preferable. It doesn't really stick to anything but itself however it's quite rubbery and multiple layers would form a unified single tyre. It's best applied under slight tension which might make it difficult to maintain an even thickness.
Great one, as always. I wonder though. If you have blade guides both above and below the cutting area. What difference does it make if there is a slight wobble in the wheels?
When fitting the shims ,a piece of tape onto the shim either side would keep it in place without altering the shim thickness.Still proceed with the bolts through first but now you won't push the shim off as easily.
i have similar saw from maybe 5 years, and really is no bad. 350W 240V motor, 1450mm blade. I cut lot of briar wood on, and is tough staf. I uses it to make some curves cuts you can see some on my fb kropiwno 47 and JSG Pipes art sites, and is no bad. I often need to make some small repairing but work good enough.
Hi.....like this helpful video as I'm very practical too. I've just ordered a Silver line bandsaw at the cheapest price....looks just like this one. will be using mainly for shape cutting no more than half inch to an inch thick. will be putting a Draft blade on as soon as it arrives. I have number of lower priced tools that do perfect jobs! thanks once again for video.
Pulley wobbling is probably caused by the way the centre hole is machined before they insert the bearings, or it could be a distorted pulley itself and doesn't mean it's a fault, only a product defect. Better to wobble a little sideways than up and down.
Thanks a million! Haven't viewed it yet but had to mention my MC bandsaw purchase yesterday, cuts veer badly to the rightso this video couldn't have come at a better time. I tried everything and finally solved the problem by altering the kerf on one side of the blade!! I'm afraid watching this video will make me feel quite dumb...
Cool man.. I really don't know how you figure all this stuff out, but I wish I could have you over to tune up all my tools! If your ever in the Chicago land area let me know ;-)
Gee, that thing is SO much better than the Craftsman Tilting head band saw that you trashed. I can't believe you were willing to put some work into this little POC and not into the Craftsman saw.
The Craftsman saw is fatally flawed. One could bring it back to like new specs and it would still have a fairly low mtbf to say nothing of the problems of multiple degrees of freedom, and servicing headaches. The Canadian Tire units problem is not so much the basic design as it is the huge tolerance bands in manufacturing... Its a cheap and simple field upgrade.
Good information in this video. The techniques are simple but effective. The zero clearance plate is very nice. Can you post a video about how you made that Table Saw Sled?
turning the wheel by hand? that was pretty dangerous lol I liked it :) ... I did something similar but is spun up the wheel and used some heavy sandpaper and pressed it against the wheel track with a wooden dowel. take care
when you use the dial to check wheel maybe mark area thats low and put on a bit of tape to build up before putting on final continuous strip .Just a thought
Great video Matthias! I also use a benchtop bandsaw Metabo 5378c, and just as your saw, mine gave me that much trouble getting it to run. I replaced the shredded tires with kork, but that ofcourse took away the wheels crown (cant use tape because then the blade is out of the guides reach) . Also the blade guides are adjustable in any direction and it seems impossible to figure out the proper settings. I'm sooo looking forward to build a bandsaw of your designs, so I know what I am dealing with.
Any wheel variations are fairly irrelevant as long as the blade tracks on the tire correctly. That tire, with it's curved/convex surface (crown), is critical for proper blade tracking since the top of that crown (not the wheel itself) is where the blade actually rides. Protecting that crown is the primary reason for reducing blade tension between tool use. Remove your electrical tape and buy a proper band saw tire (diameter & width). Will also reduce blade wear and noise.
Thanks that will be helpful when I'll manage to keep the blade on the reals. I have the very same saw and I can send you the alterations I am doing on it. I need new tires and I do not know where can I get them I would appreciate if you could advise me. Thanks again for the video, keep it up
On that band saw wheel being a little out of round, what if you put a partial wrap of electrical tape on the low spot and then do a complete wrap with the idea of "shimming up " the low spot
I have a Spectra Tools bandsaw that is nearly identical to this one. Having so much trouble trying to get the blade tension correct to keep the blade on. If I get the tension right then the wheel hits the screws on the case behind it. So frustrating. Haven't seen any bandsaw remotely like it until this one.
This question might be way off but here goes. I have the base of an old Ryobi table saw that I would like to turn into a router table. Do you have any helpful hints for this project. I always try to use what I have to make things work. If you would be so kind as to have time to help me I would be so appreciative. Thank you! Have a phenomenal day! Jess
I had a cheap table saw top that I was thinking of doing the same thing years ago. tossed it when I moved. step 1: free up some space by getting rid of that junk. step 2: build router table.
Uh.... yeh the place you put the vice grip with cutting tool gets narrower as the wheel turns downward.... use a file or stone and a safe rest and you can grave it even a hack saw blade might do it
OMG I HAVE THAT SAME HOLE PUNCH! I thought I would never see anyone with one like it ever, because all the hole punches in stores are those long black metal dealies. I don't know why, but that made me excited..... :-P
Hi Matthias, this video is very helpfut to me, could you please tell me if this bandsaw is a black & decker? I have to tune mine up. Thanks. Gabriela from Argentina
My absolute favourite UA-cam woodworker. I am humbled in the presence of such greatness. Words fail me. Its like everything I thought I ever knew pales in comparison.
I am not worthy to witness such greatness yet something draws me back, an irresistible pull. Many have tried but none can match that exquisite quintessence of all that makes the Wandel woodshop special. Nobody Does Bandsaw like Matthias. He is the God emperor of bandsaw wisdom. His competitors are as dust and ashes in comparison.
Teach me Lord Mathias in your ways. I will no longer fear those who dare to question your word.
Stand back you dogs !
Speak to us master.
Your enthusiasm for this work is very pleasant to watch. Your tinkering is really top notch.
There is a very good video here called "Bandsaw Clinic with Alex Snodgrass" . It is the best tutorial that I have ever seen. In it he explains why planar alignment of the wheels is not important. They are designed to be out of alignment. Having said that, congratulations on the good video and the work that you have done in improving this machine.
I always learn so much from your videos no matter what the project is you are working on. Your intelligent approach to problem solving as well as your pragmatic approach to getting the job done is inspiring
I have a cheap bandsaw that needed a new tire but it is not worth the $30 + shipping to buy "proper" replacements. I went to our local thrift store and purchased solid leather belts to make tires the "old fashioned way" (?). The leather was 5/32" thick and the belts were $1.00 each. I can get two tires strips from one belt and I cut them to fit between the ridges of my band saw wheels. I glued the leather tire to the rim with a silicone type adhesive (Shoe Goop), rolled the rim so that the tire laid evenly around the rim, taped it to hold everything in place and left it 24 hours. I then installed and tested and it worked great. I did not bother crowning as the other wheel is crowned and it was easy to track as is. Time will tell if all stays well but the repair was cheap and easy and that is what I wanted..
.Thanks for sharing that info going to try it myself.
Thanks. Worth keeping in mind 👍
Peter Tyrrell did it hold up?
I also received a small cheap band saw for free because my uncle found it to be more trouble than its worth. thanks to you its running very well now, looking at all your videos gave me excellent insight into how these tings should work. For the pulley tires i just used a hard leather strip which i milled into a crown and that seemed to work well.
I have never done any type work that relates to your videos (I'm a scientist), but for some reason I enjoy watching them. I've been subscribed for over a year now and I still get happy when I see your videos pop up in my subscription box.
Finally, after all these years, I finally found someone more meticulous than myself. Enjoyed watching you work. I like the precision you strive for. Keep up the good work, and thank you for the video.
I wasn't looking for such a good education, but I got it anyway! Excellent breakdown of all the parts of a simple bandsaw... much easier to see the things that can go out of whack. Thanks!
another thing that would have worked good for removing some material on the wheel would be a thin strip of emery cloth(or even some sand paper on a wood block pushed in there), being an aluminum wheel its soft enough to sand down. Matthias you are a true icon in the field of fixing and re-purposing tools to make a more accurate instrument. truly something that has been lost it seems over generations as todays society says "if it doesnt work right throw it out!".
I just used your tip on electrical tape to fix my bandsaw. I picked up a larger saw for free but it had no tires and no motor. I have plenty of adjustment travel so the number of wraps was not critical (it runs a 78 inch blade). Even so, I used three wraps and it works great! I also have the same saw in your video made by Ryobi - another freebie from a retiring co-worker. He used silicone to make his own bandsaw tires.
Thanks Matthias, I got an old Einhell saw from my son, and your video provided all the help I needed to fix it up again.
I just got a three wheel 16" Delta band saw ( cast iron frame ) and after I found some tires for it I found it set up really well. I had one of those band saws from CT...I'm happy to say I chucket in the garbage. I enjoy your videos Thanks
this was one of the most fun and awesome videos I've seen regarding refurbishing power tools. I got the 9 inch Mastercraft at a garage sale this weekend and it had poor and busted tires. Going to try the electrical tape tomorrow
Very nice vid!
Do read the linked article as well
Wheel wobble causes variation in tension, and that causes a lot of vibration.
I have a bandsaw that my dad left me when he moved to Az. and it's missing that bottom wheel rubber piece, I'm going to try that with the tape. Thanks for that idea. On a different note, after seeing this video, I decided to check out my other bandsaw that looks like the one you have here. It never seemed to cut right and I discovered that about 3yrs ago I had put the blade on with theeth facing the wrong direction, points up, not down. Cuts great now. Thanks for the video... LOL.
This is the third episode of this channel I watch this morning!!
Loved the tuneup. I have a ten inch Sears that could use a tuneup just like this. Just a tip for the shim you mounted. A touch of thick grease or vaseline will stick the shim for truly blind spots making it a lot easier to deal with. Great vid!
Hi 12345NoNamesLeft,
I agree. I've made aluminum washers just as you've described several times in the past. Very stable and works great.
Matthias is a UA-cam icon, no doubt. But, I have to say this...
The process he used to remove metal from the lower pulley/wheel on the band saw is called "Turning", not Milling as he stated in the video. His first attempt at turning is called "Gouging". ;o)
Thanks for clearing that up. The squishiness makes the tape not suitable (it's under constant pressure when the bandsaw is stopped), and the price not cost effective.
Someone dumped one of those behind our warehouse and the only thing wrong with it ' was the lower wheel belt like yours. I have a 12" band saw so I make my craftsman into a 1" belt sander which woks amazingly well. I may modify it so I can use bigger belts and cut them into 1" strips (saves money). Always enjoy your videos. Cheers
Thanks, I learned from this video. I recently purchased a 10" Craftsman Band Saw at a yard sale. It works but I seem to throw the blade easily. After watching this video, I went out to the garage and examined the blade guides. The lower guide had the left side completely missing and the right one loose. That explains that problem. Now to replace the blade with more set so I can make tighter curves. Thanks!
wow, the cutting tool incident scared me slightly. but hats off to you sir, you put a lot of time and effort into getting the saw to run correctly. thank you for the suggestions and ideas to tune up my P.O.S. Ryobi 9inch(22.86 cm) band saw.
Hey, what I did worked, and took less time.
Mathias will one day make a viable metal lathe from primarily wood. Been enjoying your videos for years. Thank you for them
"thats cus i got it for free" *flick of the wrist and smug look* I WAS DYING.
Totally love your videos. For getting the wheel running perfectly round you should consider using a grinding attachment for a dremel (or similar) and grind the surface while the wheel is spinning. That should eliminate the wobble almost completly.
He is talking about "tooth set".
If you look at most saw blades, the teeth protrude out of the plane of the blade body. This has advantages by clearing chips, and preventing heat build-up from friction as the blade body passes through the wood. It also allows for curves to be cut, since the set of the tooth allows it. Since "tooth set" increases the width of the cut, and hence the load on the motor, saws this small often don't have much tooth set on their blades.
Your generally pretty much a genius but I was stunned at how daft an idea pliars and cutter idea was. Glad it's not wedged in your head, stay safe!
you can put your plastic "shim/washer" material between two pieces of wood and drill straight through instead of using the hole puncher....just an after thought.
justin barrett totally . I was wondering why he didn't use a drill of the correct size. and a metal file to true up the wheel.
It's amazing how much that Canadian Tire saw looks like my little Ryobi. Probably share lots of parts too. hahaha
Probably the same blueprint and pumped out of the same factories.
when you go to mount the motor with the upper bolts holding your shims, use two long studs in the bottom holes to start your motor in alignment in the bottom holes and it will all lign up. if you had to shim in any other plane use the longer bolts in the un shimmed holes. best of luck Matthias!
Good to know it lasts. I already had a crown on the rim, so didn't need to make one with the tape.
Hi Matthias, this mini band-saw it seams to be a great copy of my discontinued “Delta 28-180” band-saw.
The tape he's talking about, (I think), is actually silicone. I use it for taping up a florescent bulb I use at work. I've found when electrical tape gets hot the adhesive lets go and creates a gummy mess when you try to re-tape it. So if heats a concern for you it's worth considering. I've seen it for $10 - $20 a roll from Uline, or MSC It is thick and squishy so the blade may dig into it and shred the tape though.
I believe RentAnEducation means self vulcanising tape. You stretch it and it starts vulcanizing (rubber starts polymerizing) and so becomes one solid body. I have used it to cover mast spreader screws with great success
This was a very useful video as I have a bandsaw almost identical to yours. The biggest problem with this is that it never cuts in a straight line but always veers off at an angle. Any thoughts on why it might be doing this would be great, I have ordered a wider blade to see if that solve the problem.
+B0M0A0K Look up "bandsaw resawing" on my website
+Matthias Wandel Thank you for taking the time to reply Matthias, much appreciated.
+B0M0A0K Check the blade tension. There is a blade tensioning video on youtube that tells how yo "pluck" a blade, and tell tension by the tone that is produced. Also, drift is caused by a blade worn on one side, from hitting metal in the wood or by misalignment of the guide inserts. Adjust the inserts and try a new blade.
I have a simpler size bandsaw with same problem. Solution is to aline the blade so it tracks 90 to the wheel. The guides also have to be at the same angle.
Thank Matthias. You inspire me to tune up my cheap bandsaw.
I am unfamiliar with Harbor Freight Company, but Canadian Tire is a kind of general tool, Automotive, and Hardware store. They specialize in Automotive parts, Tools for automotive and Woodworking craft, Plumbing and Electrical, Kitchen Wares, Gardening stuff, Fishing, Hunting and Outdoor activities. Kind of a generalist place thought, nothing exceptionally high quality, a moderate selection, and they don't sell major building materials. It's a good place for the average handyman to go.
I ave about 1/8 thickness of electrical tape on mine for years now. Just make sure you wrap more in the center to crown it some.
I have the same saw but brand is Power Max. With a tune up its does my bandsaw needs just fine, thanks for the ideas.
A gasket punch set works more cleanly for making round holes in stuff like pop bottle plastic.
Canadian Tire saw, President's Choice pop bottle. Oh Canada. Greetings from Winnipeg.
Amazing. A dial indicator, Wow. Thank you for the electrical tape idea. Saved me 33 euros! Did you try duck tape?
Love your homemade band saw.
Great to see making a custom insert for the saw. My cheap band saw needs a new insert too.
Aluminium soda pop cans make nice shims too.
Plastic can deform as you tighten and disintegrate/oxidize over time- the aluminum is more stable.
One of the better videos on fixing and tuning. Thanks!
Just one constructive criticism Matthias.
Your use of the puller was incorrect. You should tighten the screw, then tap the end of it to break the hold.
To keep on winding the screw with the wrench, risks damaging the motor shaft.
The video was entertaining and informative as always.
Got mine for 25$ , and your video was very helpful to get it running again. Thank's !
I just got this exact saw given to me, also with a missing tire -- Thanks for showing me how to set it up!
nice little bandsaw, would come in real handy :) my band saw is vibrating so much now I can't really tell where the blade is going to start cutting
Like your video. Like the way you manage things. Marvellous. Finding easy solutions for most of the problems. Congratulations.
I also did all you have done and more. That 3 screws are not enough or not needed. It's a real bad design though I did use it for years for aluminum mainly. I also removed the 3 6 mm bolts and made a new shaft with a wider spacer. No matter what I do, I rum out of patient before I fix it.
May be its time to buy a better one.
Hi Mathias, For a tire I wonder if a slice from an inner tube would work. Like a large rubber band. Stretch it over the tire.
Harbor Freight in US is more like Princess Auto in Canada.
Canadian tire is leaning more towards housewares and general merchandise, more like Sears now than the hardware store it started as .
nice vid! I just bought a mastercraft 6'' jointer on sale for 150. The tables are not adjustable other than hieght for the infeed, and they aren't completely parallel. There is only one corner that is high by about 1\32''. I end up planing the first half then nothing at the end, (like a wedge.) Im thinking about sanding down the bad spot. I always feel like I'm playing the lottery with buying stuff at CT, but Ive won a few times lol..
There was a screw hole on the bandsaw case adkacent to where you were using the cutter head. If you had mounted a bolt at that location, it would have made a nice tool rest.
We were using duct tape as a tire for a 8ft blade bandsaw for about 6 months. Its however a metal sheet cutting bandsaw so it only spins at about 130-175sfpm. It was fine though .
You were doing everything perfect, I was amazed that you do it like that, using the correct tools and then laziness comes around 7:38, nice videos man, I admire the way you work, greetings form Mexico.
Late comment, but I wonder if self-almalgimating electrical tape would be preferable. It doesn't really stick to anything but itself however it's quite rubbery and multiple layers would form a unified single tyre.
It's best applied under slight tension which might make it difficult to maintain an even thickness.
too sofr
Great one, as always. I wonder though. If you have blade guides both above and below the cutting area. What difference does it make if there is a slight wobble in the wheels?
Eight years later I'm wondering if you still have this thing.
it's in my dad's old shop. The top tire (the one I didn't replace with tape) failed, so that one should be replaced with tape too.
@@matthiaswandel Oh cool, thanks for the response!
The run outs on the wheel are pretty close for a cheap tool. You should get a metal lathe. I think you would do well with it.
When fitting the shims ,a piece of tape onto the shim either side would keep it in place without altering the shim thickness.Still proceed with the bolts through first but now you won't push the shim off as easily.
you continue to amaze and entertain me. Hats off once again.
i have similar saw from maybe 5 years, and really is no bad. 350W 240V motor, 1450mm blade. I cut lot of briar wood on, and is tough staf. I uses it to make some curves cuts you can see some on my fb kropiwno 47 and JSG Pipes art sites, and is no bad. I often need to make some small repairing but work good enough.
Hi.....like this helpful video as I'm very practical too. I've just ordered a Silver line bandsaw at the cheapest price....looks just like this one. will be using mainly for shape cutting no more than half inch to an inch thick. will be putting a Draft blade on as soon as it arrives. I have number of lower priced tools that do perfect jobs! thanks once again for video.
Pulley wobbling is probably caused by the way the centre hole is machined before they insert the bearings, or it could be a distorted pulley itself and doesn't mean it's a fault, only a product defect. Better to wobble a little sideways than up and down.
Thanks a million! Haven't viewed it yet but had to mention my MC bandsaw purchase yesterday, cuts veer badly to the rightso this video couldn't have come at a better time. I tried everything and finally solved the problem by altering the kerf on one side of the blade!! I'm afraid watching this video will make me feel quite dumb...
Have a cheap 9" Ryobi bandsaw. Thanks for the video showing what a good tune-up will do! I will have a go myself :)
Cool man.. I really don't know how you figure all this stuff out, but I wish I could have you over to tune up all my tools! If your ever in the Chicago land area let me know ;-)
Rubber electrical tape is self sealing, longer lasting than plastic tape and only a little more expensive. Available at most hardware stores.
Tip.. use tab of grease to hold shim stock..great vid as always
Thank you for using the metric system!
He's Canadian, that's why.
why doesn't the us use the metric system for everything, not only in space
Gee, that thing is SO much better than the Craftsman Tilting head band saw that you trashed. I can't believe you were willing to put some work into this little POC and not into the Craftsman saw.
The Craftsman saw is fatally flawed. One could bring it back to like new specs and it would still have a fairly low mtbf to say nothing of the problems of multiple degrees of freedom, and servicing headaches. The Canadian Tire units problem is not so much the basic design as it is the huge tolerance bands in manufacturing... Its a cheap and simple field upgrade.
Thank you! This was a big help to tune up the benchtop bandsaw I just picked up.
Good information in this video. The techniques are simple but effective. The zero clearance plate is very nice. Can you post a video about how you made that Table Saw Sled?
jsut google it so many designs for table sleds.
turning the wheel by hand? that was pretty dangerous lol I liked it :) ... I did something similar but is spun up the wheel and used some heavy sandpaper and pressed it against the wheel track with a wooden dowel. take care
when you use the dial to check wheel maybe mark area thats low and put on a bit of tape to build up before putting on final continuous strip .Just a thought
Thank you Matthias. This was a very interesting and informative video. 👍
The replacement tires (urethane belts on the wheels) for your saw are found on Ebay for only $15 for both.:-)
Great video Matthias!
I also use a benchtop bandsaw Metabo 5378c, and just as your saw, mine gave me that much trouble getting it to run. I replaced the shredded tires with kork, but that ofcourse took away the wheels crown (cant use tape because then the blade is out of the guides reach) . Also the blade guides are adjustable in any direction and it seems impossible to figure out the proper settings. I'm sooo looking forward to build a bandsaw of your designs, so I know what I am dealing with.
I love your videos and work, but man, the FIRST thing I would have done after opening up the case is vacuum it out!
Any wheel variations are fairly irrelevant as long as the blade tracks on the tire correctly. That tire, with it's curved/convex surface (crown), is critical for proper blade tracking since the top of that crown (not the wheel itself) is where the blade actually rides. Protecting that crown is the primary reason for reducing blade tension between tool use. Remove your electrical tape and buy a proper band saw tire (diameter & width). Will also reduce blade wear and noise.
Thanks that will be helpful when I'll manage to keep the blade on the reals. I have the very same saw and I can send you the alterations I am doing on it. I need new tires and I do not know where can I get them
I would appreciate if you could advise me. Thanks again for the video, keep it up
On that band saw wheel being a little out of round, what if you put a partial wrap of electrical tape on the low spot and then do a complete wrap with the idea of "shimming up " the low spot
Insert thug life meme at 0:05. Jesus Christ man, you're fuckin savage XD
Ah, Canadian Tire. Your videos always make me nostalgic for Canada, Matthias!
I have a Spectra Tools bandsaw that is nearly identical to this one. Having so much trouble trying to get the blade tension correct to keep the blade on. If I get the tension right then the wheel hits the screws on the case behind it. So frustrating. Haven't seen any bandsaw remotely like it until this one.
Sorry, but I laughed out loud on your first milling attempt. Glad you weren't hurt.
Let's do it again LOL
badlandskid yeah, I'd have used a metal file and come in from the direction he did on his 2nd try.
i already laughed when he said "safely secured in my vice grip" ^^
You can hear the engine power in Watts?
MUDHD o
Why not use that stretchy repair tape? The kind that would bond to itself and make a solid rubber piece.
سلام استاد مهربان و با سخاوت
مثل همیشه عالی عالی کامل قوی فنی حرفه ای
ممنون
با احترام
فرزین
This question might be way off but here goes. I have the base of an old Ryobi table saw that I would like to turn into a router table. Do you have any helpful hints for this project. I always try to use what I have to make things work. If you would be so kind as to have time to help me I would be so appreciative. Thank you! Have a phenomenal day! Jess
I had a cheap table saw top that I was thinking of doing the same thing years ago. tossed it when I moved. step 1: free up some space by getting rid of that junk. step 2: build router table.
"Thou" I love the way he says it
Uh.... yeh the place you put the vice grip with cutting tool gets narrower as the wheel turns downward.... use a file or stone and a safe rest and you can grave it even a hack saw blade might do it
OMG I HAVE THAT SAME HOLE PUNCH! I thought I would never see anyone with one like it ever, because all the hole punches in stores are those long black metal dealies. I don't know why, but that made me excited..... :-P
Hi Matthias, this video is very helpfut to me, could you please tell me if this bandsaw is a black & decker? I have to tune mine up. Thanks. Gabriela from Argentina
Where can you buy a blade for these small 6 inch band saws. I have one but I can't buy any new blades for it. Help
Your skills are very impressive.