Це відео не доступне.
Перепрошуємо.
Crushed And Forgotten 20 years! Will This Old Chevrolet C10 Be Able To Run And Drive Again?
Вставка
- Опубліковано 12 лип 2024
- Get 20% OFF + Free international shipping @manscaped with promo code “TQG” at Manscaped.com/tqg! #manscapedpartner
Join this channel to get access to perks:
/ @thequestionablegarage
Subscribe to The Questionable Garage ► bit.ly/2D4iSp8
Buy our NEW shirts and merch!► www.bunkerbran...
Follow us on Instagram ► / thequestionablegarage
------------------------------------------------------------------------------------------
Welcome to the Questionable Garage, where Jared takes on the ultimate restoration challenge! Watch as he tackles the monumental task of reviving an old Chevrolet Service Truck that’s been crushed by a tree and left for dead for over 20 years. With ingenuity, determination, and a trusty old Case Backhoe, Jared aims to breathe new life into this forgotten relic. Can he overcome the odds and get this vintage workhorse running and driving again? Subscribe and join the adventure to find out!
------------------------------------------------------------------------------------------
Questions? Comments? Business inquiries? Email us at jared@thequestionablegarage.com
Don't have internet and want to send us something? Here is our new P.O. Box!
Wrench Every Day
P.O. Box 437
Lula, GA 30554
------------------------------------------------------------------------------------------
Facebook ► / @thequestionablegarage
Instagram ► / thequestionablegarge
Jared on Social:
Instagram ► / jaredpink
Twitter ► / thejaredpink
Links to our partners:
Have a wiring project? Our Friends at WireCare have you covered!
www.wirecare.com
Need speed parts? The Holley product line has you covered!
www.holley.com
Get 20% OFF + Free international shipping @manscaped with promo code “TQG” at Manscaped.com/tqg! #manscapedpartner
Another johhny😊
The irony of it parked next to a tree service truck is just great. Looks like someone got a new camera too, very sharp
Cab reconfigured on a tree removal job!!
AND the tree service truck has also been overgrown with trees. Love it.
😅 you can't write this to be that funny
It's spot on 😂 first thing I saw
I see you 👀🤟
You should make it into the Questionable Garage Rescue Truck where you use it to rescue broken down cars of revival cars
Its 2wd
@@arlingo so? That can be addressed if it really needs 4wd
@@tyg3rpro well, if you got a couple hundred bucks to take it off him, im sure hed be more than thrilled about your lil plan. Otherwise, too much hassle for not enough truck, especially when theres a good international right outside. This is going to be too heavy to do anything without putting in several $1000s for a lift, tires, and power, plus the need for a transfercase, axle swap, all the geometry in between. Anyway, enjoy doing it when you buy it. Lmk where i can follow up on your project. Good luck.
@@arlingo i dont have room for any more projects and besides you cant call it a questionable rescue rig if its purpose built for the task its doing and doesnt make you question wether or not it can do it right? I mean it is the questionable garage after all
It's so stupid but little moments like Jared struggling with that radiator cap do so much for my self esteem. Because I too have those moments when something is way tighter than it should be.
First time we have heard Mrs Questionable Garage.
As you begin to pressure wash it and ask what to do with it, my first thought is donor cab and make it into a true service truck similar to Garfield over on Flying Sparks Garage. These are super cool trucks and would be a real asset to you on Power Tour-your own personal service truck with tools and parts!
One more comment Jared.. It was TOTALLY worth it doing all that work at the end for the drive.. 100%.
The music at 11:30 is genius. My Dad would whistle a similar tune when we worked on projects. Thanks for shaking loose a wonderful memory.
If a tree falls onto your truck when no one is around... Does it make any noise? I think we're going to hear plenty of noises, from Jared, as he tries to resurrect his latest rescue.
Even if the cab is totally FUBAR, the engine, frame and especially the lift gate service bed is worthwhile.
This is just purely amazing, my first vehicle was a 86 or 87 Chevy C10 manual I drove my first 2 years. I did questionable driving from work at DQ, no cup holders, taking ice cream home and shifting and answering a flip phone. Premium driver I promise. Never got into an accident with that thing.
I really enjoyed this episode! Using a leaf blower to clean out the cab was genius (and very entertaining). Thanks for being so compassionate and saving the baby barn swallows! I’m sorry you broke your finger during the rescue. Please take care of yourself!
Your encouragement, compassion, and kind, thoughtful demeanor makes TQG reminiscent of a cooler, more informative, automotive centric Mr. Rogers’ Neighborhood. You’re bringing massive amounts of joy and comfort to UA-cam and the world. Thank you so much 😊
Appreciate the kind words! The finger is doing a bit better, and the barn swallows still yell at me if I visit them!
After the wasps I was expecting you to find a snake. I see the truck came with the optional Child (Make that Adult) Proof Radiator Cap. Is the Tree Service truck going to be a future project too?
You didn't go full undignified but when you were driving through the tall grass I was reminded of a line in a book "You can't look dignified when your having fun."
You have to appreciate the composition at 15:17 that Tree Service sign was an an omen
Who needs Maaco when you have a CASE Loader
That was awesome Jared. Heard your wife scream from the wasps coming out the truck. I think it’s super cool that she comes out to help you with your rescue projects. You’re a lucky guy. 👍🏻
12:24 - im thinking you chop the roof off and have a summer truck or something, bit of a dumb idea.
31:29 - I love how wonky it is lol, it has a bit of character.
This truck would be a great candidate for a cab swap!
Find a rusted out cab with a decent roof, and section a new used roof onto it. Probably a lot less work than trying to straighten that one, with better results
Anyone else have glorious visions of jared and his giant dog in flying goggles running hydraulic suspension bouncing in a parking lot. Great work and video.
That cab repair was 100% @PoleBarnGarage style. I think Dalton would be proud. 🛠️
I like the variety of content in the channel.Thanks for sharing and taking us along
You have been hangin out with Derek from VGG to much when your project starts with a weed eater, I love it.
One on my favorite video you did recently. Too bad you have too much project at this time. It is really a cool truck.
Thanks 👍
Ouch!! Sorry about your finger, my friend! Miss seeing you!
Dude with the lift gate and tool bed that thing is a great work truck! Clean it up a little make sure its dependable. That chevy 350 will last forever. Little bit a banging and pinging with a hammer and you gots a decent work truck! Nice score.
Super interesting video! I just bought a 1987 Toyota Supra from my brother that arrived worse than I expected and your video gives me hope! Thanks!
So, there may be a Supra coming up on the channel(not the wedding Supra) that will really give you hope! BHG, 1,700 miles to home. Finalizing plans!
@@TheQuestionableGarage nice! I'll watch for it. I love how that chevy was still tearing around that field and able to do donuts. Sick!
Part 2 - Jared negotiates with the windshield installer
Do the tree service truck next! 😂😂 convert the service truck to a convertible as well!
Edit again: I commented before I watched the video lol
It's really cool to see an old Knapheide 700-Series service body like that! They had the long horizontal compartment on the passenger side and the short horizontal compartment on the driver side. I've been selling Knapheide parts for coming up on 11 years now, so hit me up if you need parts for it!
This is a super cool truck. Hope that someone will fix it and drive it!
How do you not get hammered by wasps...and literally as I'm typing you find 'em!!
Replace the whole cab and fenders sandblast the bed and repaint put in a hoist and rescue vehicle
How much fun was it pulling the cab back up with the loader? 🤔 LoL 🤣😆
It was enough to make up for breaking the finger for sure!
This was cute. Can we maybe thing about working on Honda Rousey again? That would be most cool.
Rousey has been getting progress for a big update soon
My first thought was to watch out for bees.
That has got 'Jarad's Questionable Garage' written all over it. You should repair / replace the cab and use it as it was intended. Would be perfect for your antics! (Think how many engines you could carry in the back).
Ya know i seem to remember Dalton on pole barn garage wanting a service truck for revivals.
Smooth Jared isn't real, he can't hurt y...
I don't like trucks, but there really is something about trucks with service beds that appeals to me, and I really like them.
Nice ! I used to have an 82 with a service body . It’s so nice to be able to grab things from the side of the truck.
Bolt Honda Rousey on that frame to make a huge unibody a little stiffer ❤
the squarest of the square bodies makes for a really cool rock crawler, maybe you should gave it a shot, get some super duty axles and an np205
You're a good bloke Jared. Cheers!
Omg Jarod this was a very cool episode love how you got the beast running then had a little fun with it.
Pole barn garage or junkyard digs need to check this out. Even if it's just for the driveline and service body
Jared, I'm not suggesting that you do a complete nut and bolt restoration, but I think you should restore it into your Questionable Garage Service truck and then instead of just paint, put your logo along the sides and back of it plus your channel sponsors. This is probably better than just a pick-up truck and better use for your business
After watching "just rolled in" i'd say.
This is a total common, reasonable daily driver.
Get a donor truck, swap the cab and doghouse. I'd watch that, or offer it to another UA-camr, maybe sleeperdude, this is right up his alley, either way I'd watch. Would make a great tool carrier for revivals or whatever. Great video, thanks for sharing.
Really not a bad truck. JB weld a top on it, replace the left door and windshield, and you've got a good work rig!
I'm curious how to fix aluminum, chrome, and general oxidation on old vehicles. Wire brush and a buffing wheel along with a lot of elbow grease?
Hi Jared nice video 📹 and workmanship put a wrap on it and pull out the dents with the top of the line factory brrrand new looking
Love your revivals man keep it up, you're one of the most fun to watch.
Sad to see them go. Glad they are going to a good home.
Great to get snaps shots of all the work that goes into a race weekend great video.
Wow, great work getting it moving after it sat for so long! Fun times! Hope your finger heals quickly 🙏
Drop the bed onto something else, or drop another cab onto that frame. Then you can use it for revivals.
Love the tree service truck right beside it
Loving all the white dog fur on the black shirt. I atleast have a black attire for my 3 dark colored dogs!!!
Truly do love the work you do Jared! I honestly thought that this was going to become the Questionable Recovery vehicle haha. Understand you saying it’s not for you though. Keep up the good work mate! Can’t wait for the next vid! Big fan of yours here in Australia 🙂
It reminds me of the one Derek did. I see a race of service trucks soon.
Giant western maple tree branch, two feet thick, fell and crushed ny Airstream Argosy 28 foot motorhome project. Branch fell right over driver's compartment. I can relate. I did get the 454 running like a kitten and put all new 3/4 inch plywood floors in before the tree branch. Fortunately I had insurance. On to next curiosity....
I just bought coilovers for my project(because my current daily(that wasn't supose to be daily) needs better springs but am still waiting for camber plates since i had two options for that(UK or Japan). Also just bought 6 speed manual for it and i think that's big thing since they are almost impossible to find for last few years.
It would make a cool convertible! I bet you could get a button down top for it too! I saw a f250 convertible once ad it was still doing truck stuff
Dodge made a factory convertible Dakota from '89 to '91, they made something like 3,000 of them in total. I saw one on Marketplace for $3k the other day.
0:25 huh, we have the GMC version of that V roof.
honestly seeing it drive around at the end especially ... I hope someone buys it (if you dont keep it) ... it has character and (i know i know "the price of things are too high to justify putting money into that truck) .... but it deserves a new life ... fix up enough stuff ... maybe get the body issues taken care of and paint it ... well like i said it has character
@11:30 Rake by PlaySkool
My curiosity has been tweaked here. Did the fuel pump have a return line? I saw only a single line to your fuel tank. So I wonder about the fuel return line. I think the fuel return line started around 1979.
One of if not my favorite video of yours, and I’m a Ford guy
Scrapyard cab and a little paint and body work and that would be a really useful truck for someone. It certainly doesn't need to be turned into paperclips.
I prefer to climate start my car with my phone when its 100 degrees outside. I still love your channel.
In this shape, with the roof "fixed", even if you manage to find glass that would fit, would it be road legal? I mean, is there another future for that truck beside being a part donor? Unless, of course you go all the way and find a replacement cab for it.
"come on get back in the hole! Theres some kind of lubricant on there!" 😂 Be a good t shirt jarod.
I vote for it to become the Questionable Garage Shop Truck.
that would make a great farm truck to have for fixing machinery in the field and such, someone should buy it!!!!
Do a collab with Mr. Goodpliers. I'm sure he has a decent cab lying about that would complete this truck.
Get with Derrick and see if he’s got a cab that you could swap. I would like to watch a cab swap.
This is the Jared Pink Gardening channel we never knew we wanted.
Think about this Jared, you pull a old rusty Chevy Silverado work truck with a v-notch roof from the weeds, get it started and put a couple hundred bucks into it and it you take it to the scrapyard you might make your money back. Hoovie needs to take some advice from you bc he’s buying Maseratis, bmws and Bentleys and loosing his ass with them, lol.
Cab swap,it looks like it could be very useful to you.,Tommy lift is a plus .
Hello again, Jared
Thank you for another Great Video 👍 With a lot of work you make back into work truck or something different 😀
Thanks, you too!
You’ve been hanging out with Derek too much and I love it.
Puddings fab shop has a parts truck that would work I believe.. a collab with him would be cool.
Find an older cab since bagged utility beds look pretty good
Same year as me. . had lots of these trucks. 70s 80s 90s. Saved very beautiful nice 1989. GMC Sierra 3/4 had a bad 350. And I did a engine swap vortec engine same year as my sister. I don't like putting good running truck s in the tree row. That's why I sold my old Dodge ram for farm use not for road use. It's better than scape yard. Rather see it being used or something like that. Some people don't care or they scape good stuff. That's how I got my new to me 89 GMC OBS .
I have a red cab doors hood and fender for that if you want but I am in Pittsburgh
I like service trucks too. I hope someone will take this on as a project. It looks too good to scrap.
Truck runs great. Just find a donor cab and have a revival rig
make sure you don’t get 4wd wipers could damage or scratch glass.
0:40 Standing next to a truck that says Tree service on the door.
Jared.... That is not a project car.
That is a wreck
I want this one back on the road. Preferably as an EV of course.
That's cool af though. Needs a cab and driveable. 🇺🇸🇺🇸🇺🇸
lol take the truck to Robby Layton or V Tuned either of them can get that thing looking like new
It needs a speedster windshield. Then you have a roadster service truck.
10:08 and all the Square Body enthusiasts are SCREAMING at their screens to lubricate those hood hinges before you get the hood bent out of shape!
17:02 and now you know my pain with my Buick Lucerne; and all because it’s a Group 79 which was exclusively for GM’s big sedans (and I think the Hummer H2 used it too) and it’s now getting to the point where my employer (a large big box store with a Spark Logo) basically tells any customers with a vehicle that has a Group 79 battery to go pound sand because Clarios (formerly Johnson Controls) no longer makes a Group 79 in the “Spark” brand anymore.
@@digitalrailroader wouldn’t want to bend a mint hood!
Looks like it did in fact have Some brakes.. That front locked up wasn't slowing anything down lol.
Donor cab and hood, DIY paint job and make it the shop/service/tow truck
If the frame is good, it would be a great candidate for a cab swap, paint the frame put the new cab on and fix all the other stuff
Sorry Jared. I've been very sick for the last couple of months. I got some catching up to do.
@@louisgarguilojr2592 hopefully you are on the mend! Appreciate the support