Vizio IR Sensor Replacement - 3637-0022-0189 & Remote Control Test

Поділитися
Вставка
  • Опубліковано 7 вер 2024
  • Vizio IR Sensor Replacement - 3637-0022-0189
    CLICK HERE For Parts: www.shopjimmy.c...
    JVC TV Models:
    JLE32BC3001
    JLE47BC3500
    JLE47BC3001
    JLE42BC3500
    JLE42BC3001
    JLE37BC3001
    Vizio TV Models:
    E3D470VX LATKJZEN
    E3D470VX LAUKJZAM
    E3D470VX LAQKJZEN
    M420SV
    M3D651SV
    M470SV LAUKJYAM
    M3D650SV LAEAMEAN
    E3D420VX LAQKJXEN
    E3D420VX LAQKJXAM
    E3D420VX LATKJXEN
    E3D420VX LAUKJXAM
    E3D320VX LAQKJRDN
    E3D320VX LAUKJRAM
    M550SV LAUPKAAM
    M550SV LAQPKAAM
    This video is designed to be a guide. Please note that other complications may exist that aren't addressed in this guide. While we always strive to provide accurate and detailed information, we can't guarantee that it will fix your TVs issues.
    ShopJimmy is not responsible for any harm that you may cause to yourself or damage to your TV during the repair process. Try all repairs and troubleshooting at your own risk.
    Be sure to take all of the proper safety precautions.
    In this video we will show how to replace the 3637-0022-0189 IR sensor. The IR sensor receives the signal from the remote control and sends the request to the main board. If your remote control is not working with your TV, there are a few tests that you can run to determine if your remote control is working or not.
    Using the camera on your cell phone or a video camera, point the remote at the camera, look through the viewer for the camera, and then press a button repeatedly on the remote and see if you can see the light flashing on the front of the remote.
    If you can see the light, then you know your remote control is working and there is most likely a problem with your IR sensor. If you cannot see the light, then it is recommended to replace the batteries in your remote and test again.
    After replace the batteries, test again through the camera. If you still cannot see the light, then there is a problem with the remote, but if you do see the light, then your remote is good and there is most likely a problem with the IR sensor, and it should be replaced.
    We will start by removing the back cover off the TV.
    The IR sensor for this TV is located in the lower right corner. We have put a red box around the area.
    Our TV in this video is a tester, so we do not have any screws in some places that your TV might have screws, but we will still go through the motions of removing the screws for the tutorial.
    Remove the screws on the keypad controller and then gently lift it away from the IR sensor.
    Remove the screws on the IR sensor.
    Carefully lift the IR sensor and disconnect the cable.
    Using the replacement IR sensor, reconnect the cable and put it back into place.
    Install the screws.
    Align the keypad controller and insert the screws.
    Install the back cover on the TV and test the IR sensor with your remote.
    TV Repair Made Easy™
    © 2016 ShopJimmy.com, LLC.

КОМЕНТАРІ • 12

  • @steveremollino4525
    @steveremollino4525 6 років тому

    Thanks so much for this video and IR sensor, including the fast shipping. It arrived yesterday, and we installed it today. Voila! Our TV remote is working again.

  • @chikiteta1
    @chikiteta1 Рік тому

    Thank you!

  • @roseduciel7803
    @roseduciel7803 5 років тому

    Thanks it also worked on my sony tv remote

  • @meleciosoto2753
    @meleciosoto2753 7 років тому

    thanks guy's for this video. help a lot

  • @momzilla9491
    @momzilla9491 5 років тому

    Jimmy, Is it the same principal for a VCR? Remote won't turn on VCR/DVD-R! Power to the unit works fine.

  • @bobbyhill605
    @bobbyhill605 3 роки тому

    Hello I replaced the main board volume button and ir sensor but the tv not responding to the remote I used 3 different remote. Need help please

  • @Lactotrophic
    @Lactotrophic 7 років тому

    Hey guys, i have a problem with my philips 40pfl3078t/12.
    The screen is dark and all the inputs work.
    I have done some tests and with the flashlight test i saw that i have a picture, so the problem must be with the backlighting.
    But how do i go about changing it or fixing it on this tv?
    I opened the backpanel and could only see 2 boards and speakers, even after removing a cover.

  • @flywithme3904
    @flywithme3904 7 років тому

    Sir my LG LED TV model no 26LS3700-TB is not turning on when i switch on the power screen is black and red power signal is blinking 3 times and stops but the screen remains black. How can I repair? Is there any problem related to motherboard or capacitor?

  • @MafiaRadio2020MISC
    @MafiaRadio2020MISC 6 років тому

    I bought the IR sensor from you guy and it worked out great! Very fast shipping, I got the part in three days! But your Cell phone test of the remote did not work with my Iphone camera. One out of 4 remotes worked testing with the Iphone, so I knew this test was not working. I tested with a digital camera (not cell phone), and the remote tested fine. You might want to edit your video to include the test does not work with all cell phone cameras.
    Show less
    REPLY

  • @Woeskyyy4
    @Woeskyyy4 7 років тому

    I have a 40 inch RCA flat screen TV and the standby light comes on but the TV won't come on

    • @rowellbayuga9029
      @rowellbayuga9029 7 років тому

      try to power on the main power botton..

    • @Woeskyyy4
      @Woeskyyy4 7 років тому

      rowell bayuga OK thanks