3D printed articulated Dummy 13 figure (Animation)

Mr Campbell Prints Children Toy Fund:
www.justgiving...
Here is the animation for the 3D printed highly articulated Dummy 13 figure.
Get the built model:
mrcampbellprin...
Full Video:
• 3D Printed Dummy 13 Ar...
Download and sell my other design with the commercial license:
/ mrcampbellprints
Or
than.gs/u/1397003
3D printer:
Bambulab P1S
Filament:
Sunlu Light Blue PLA+, Esun Black PETG
Camera:
Samsung Galaxy Z fold 4
Don't forget to subscribe, like, and share this video with your fellow 3d printing, toy and fun enthusiasts!
#3DPrintedFigures #ArticulatedCollectibles #CollectorEdition #PrecisionCraftsmanship #GeekArt #ToyEnthusiast #LimitedEdition #HighTechCollectibles #FigureArtistry #DynamicPoses #3DPrintingExcellence #MakerBotMagic #UltimakerCraftsmanship #FormlabsArtistry #SculpteoInnovation #PrusaMastery #bambulab #polymaker #esun #sunlu #printables #soozafone #animist

[@Vampirebatedits]

I love that fact that the creator of this video reply’s to every comment

[@MrCampbellPrints]

Thanks you and I appreciate your attention to these details

[@videopolice432]

I tried to give a crack at it, but the tolerances seemed to be off. The pieces wouldn't snap together nicely, either requiring a lot of force, or not connecting at all.

[@MrCampbellPrints]

I printing mine at 150% scale alot of people seem to be having issues with the fit, mine went on easy and I think it's due to the size increase, give it a go and let me know how it turns out

[@DogSatarou]

Tip:try to dip it at hot water or use a blower and cool it up hope this works😊

[@MrCampbellPrints]

@zerogaming6611 this is a good tip, when any of my prints are tight due to tolerances I usually just hold them over my heater for a minute and it seems to work, only downside is that sometimes the opposite will happen and they become too loose if left for to long

[@CVC-VR]

@@MrCampbellPrintsi bought 6 of them off of amazon, it was like 26 bucks. If it doesn’t fit how long should heat them up

[@MrCampbellPrints]

@CVC-VR I usually keep it untill it's just able to be moved with a little force but not so flexible that it moves on its own, I would suggest applying a little bit of force while heating it untill its in place then blow on it or cool it down quickly some how so the position is locked in, also just apply heat in 5-10 second intervals depending on how high the heat is, Hope it helps.

[@Cois80]

omg I just started using these dummies in some stop motion. into it for my first week. these are so cool can't wait to play with them more.

[@MrCampbellPrints]

I do love them, thanks for the support

[@Groggy_9]

Keep up the good work this Animation is amazing

[@MrCampbellPrints]

Thank you so much

[@AL3XFPV]

the chappie one is soo cool!

[@MrCampbellPrints]

Yh I really like that

[@MrCampbellPrints]

I really like that one too

[@AL3XFPV]

@@MrCampbellPrints I printed it on all my versions, its sick!

[@Andriemediado]

Is worth it to buy!!! Thank u so much🎉🎉🎉

[@MrCampbellPrints]

100% check the reviews. Here's a link if you're interested:mrcampbellprints.etsy.com/listing/1692155915

[@Gaming-Motions]

super nice i might buy one

[@MrCampbellPrints]

Thanks for the comment. Here's a link if you're interested
mrcampbellprints.etsy.com/listing/1692155915

[@iconics125]

Finally, a new style of animation this is why T13 bots are unique

[@MrCampbellPrints]

Dummy 13 is what it's called originally, but I believe someone sells this design under a different name

[@MrCampbellPrints]

Tha ks you

[@amz-dummy13]

@@MrCampbellPrintsyes, t13 is a registered seller

[@MrCampbellPrints]

Great to hear, the more the better I say I love this model

[@aviapoIis]

Love it!❤

[@MrCampbellPrints]

Thank you for the support

[@DaydayYT555]

Hi new btw love the channel and love the videos and I really love t13s but I never had one I subbed

[@MrCampbellPrints]

Thank you for the support and kind words; check my etsy store if you're interested mrcampbellprints.etsy.com/listing/1692155915

[@RB2RomanRicketts]

❤amazing vid 🫸🫷🫸🫷clap it up

[@MrCampbellPrints]

Thank you so much

[@BRUXU_GAMER]

top meu mano !!!!

[@MrCampbellPrints]

muito obrigado pelo seu apoio

[@Pluh279]

im 3D printing one right now the video is really good

[@MrCampbellPrints]

Thank you so much. I appreciate the feed back, what size are you printing it

[@Pluh279]

@@MrCampbellPrints i printed them both 100 % i belive

[@chickennuggetvr123]

Where is the model?

[@MrCampbellPrints]

@@chickennuggetvr123 www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files

[@DoeWannaDoeDis]

breaking bad moment

[@MrCampbellPrints]

Lol

[@The_power_of_twoo]

Bro that’s Chappie as a 13 figure chippie!!!!

[@MrCampbellPrints]

Yh it is

[@Thegamer-sf6qt]

Nice really like this

[@MrCampbellPrints]

Thank you

[@jakecarvey]

Hola! I am trying to find the print files for this on your Patreon - are they available there? I couldn't see them.

[@MrCampbellPrints]

I appreciate you checking my patreon and your support , but you can get the files for free from here www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files

[@jakecarvey]

@@MrCampbellPrints thank you - love it!

[@ghosty-r7v]

Is blue the good guy or bad guy?

[@MrCampbellPrints]

I think of him as the good guy doing bad thing

[@ghosty-r7v]

@@MrCampbellPrints ok

[@D.B.742]

Where do I find the last one. Nice stop motion btw

[@MrCampbellPrints]

I think it was on printables

[@D.B.742]

@@MrCampbellPrints ok thx

[@ViLL_]

I loved the animation, I cried with emotion, that's what cinema is, not that shit Marvel is producing

[@MrCampbellPrints]

Thank you your support means alot, phase 1,2 and 3 were good

[@ViLL_]

But these new movies aren't that good

[@monke371]

Can I have one because all the others one are smaller than my hand and I saw your other videos and this one is big so can you make a store please😢

[@MrCampbellPrints]

It's available on my Etsy store

[@monke371]

THANKS!

[@emilyhale2012]

That’s cool

[@MrCampbellPrints]

Thank you

[@tails_animations...]

these arent hate comments these are just comments saying that this isnt really a animation just a fact

[@MrCampbellPrints]

I understand no worries

[@助ハム-q1l]

I really want the figure shown in the video!

[@MrCampbellPrints]

You can find it on printables search for dummy 13

[@plush512]

This was amazing how long did it take??

[@MrCampbellPrints]

Thank you it took a couple of hours to make

[@ninja_gaming1029]

Bro you make me look that to made so ez

[@MrCampbellPrints]

I guess it's just practice. I make many of them for people to buy, and I print them at 150% scale , thanks for the support

[@Alishewnco69]

Can you use PLA for this?

[@MrCampbellPrints]

I used pla for armour and petg for the joints, you could use all pla but the fragility of it would cause the joints to break quite quickly over time if moved regularly, I have also tried printing joints in pla and even with not much movement with a 90% infill it was touch an go

[@Alishewnco69]

@@MrCampbellPrints Thank you very much for your interest and interest, I will subscribe to your channel.

[@MrCampbellPrints]

@AliButFNaF that truly means a lot, thank you

[@galia3906]

Yeah! 13th 2.0. Thanks for you job.

[@MrCampbellPrints]

thanks for the support

[@raicucosmin6224]

You have a 3d printer?

[@MrCampbellPrints]

Yes I do, how about you?

[@jaredscott4029]

This is 3d printed HOW that’s awsome!

[@MrCampbellPrints]

Thank you for the message and the support

[@birdoh4446]

Hammer what’s his armor print called?

[@MrCampbellPrints]

www.printables.com/model/291809-scout-22-remixed-lucky-13

[@birdoh4446]

@@MrCampbellPrints thx

[@TeamMarfil]

Can these things be displayed?

[@MrCampbellPrints]

Yes 100%

[@Slendertubbie]

Maybe the poses mean

[@MrCampbellPrints]

Mabey

[@hkgaming17]

This isn't an animation

[@MrCampbellPrints]

It's probably more of a cinematic interpretation

[@MadiPlaysRoblox]

Exactly what j thought

[@FilimonFed]

​@@MrCampbellPrintsI think you meant cnimation

[@Mikes-mpg]

Well he tried his best

[@MrCampbellPrints]

Thanks

[@Luffytitan]

I made a whole storyline with the t13s

[@MrCampbellPrints]

Noice

[@Funkypenguinz_249]

More like a picture annimaiton

[@J0K3R-TSE]

After all of that don’t I deserve a pin?

[@MrCampbellPrints]

Unfortunately no

[@nickdevan2161]

hey Campbell what accessories did it come with

[@MrCampbellPrints]

It comes with sword - x2 hand pistol - x2 pistol holder -x2 blade - x1 machine pistol -x 2 sword holder- x1

[@jenniferdevan7612]

😁😁thank you

[@jenniferdevan7612]

other account thou

[@tails_animations...]

its just poses with effects

[@MrCampbellPrints]

I guess

[@Pixelsgorilla]

What did you use to edit it ?

[@MrCampbellPrints]

Power director

[@Anomally69]

There's Titan 13, T13, Nova 13 now Dummy 13?

[@MrCampbellPrints]

dummy 13 is the original Titan, and t13 are the same model, except someone has just named them different

[@Anomally69]

@@MrCampbellPrints okay I'll check the date when you uploaded you're first Dummy 13 video

[@MrCampbellPrints]

I didn't create the model soozafone did

[@montyproductions-ub3by]

im not sure this is stop motion

[@MrCampbellPrints]

It's not

[@erkhesleal3272]

It’s not

[@whathebray]

Hold on we’re is the animation

[@MrCampbellPrints]

More moving pictures

[@J0K3R-TSE]

W

[@tdid2166]

I don’t like it bc I wish it was more fun and more animations like they r moving

[@MrCampbellPrints]

Thanks for the feedback

[@lwwkaleb2132]

More like a slide show lol

[@MrCampbellPrints]

I tried my best at the time lol

[@lwwkaleb2132]

​@@MrCampbellPrints still goes hard ngl

[@MrCampbellPrints]

Thanks

[@Riskybussness20]

What animation

[@MrCampbellPrints]

I guess it's more moving picture than animation

[@Riskybussness20]

@@MrCampbellPrints ya I guess

[@marshallmyers2597]

Where do you bug those

[@MrCampbellPrints]

You can download the files on printables

[@jenniferdevan7612]

if you meant buy then he has an Etsy shop so you can your own!

[@MrCampbellPrints]

mrcampbellprints.etsy.com/listing/1692155915

[@tails_animations...]

animations are just pictures that are moved fast but this just poses to technically this isnt really a animation

[@MrCampbellPrints]

I see your point

[@860Hildaong]

don't your fingers hurt i did this and it hurt like i did 5 of them'

[@MrCampbellPrints]

I have gotten used to it by now, but yeah does hurt a little

[@jenniferdevan7612]

oh and just letting you all know its 8 inches tall😎

[@MrCampbellPrints]

😃

[@sr_pest]

omg

[@MrCampbellPrints]

Thanks

[@The_power_of_twoo]

In meant chappie

[@MrCampbellPrints]

Yh it is

[@NandoxNegox]

Me de uno qualquer pls pls pls😢

[@MrCampbellPrints]

You either need a 3d printer to make one or search etsy for approved sellers who have the right to sell this model commercially

[@user-ys2pk3vt9h]

This or a Stikbot (me stik bots are better because they are easier to stick to the ground these fall over) ❤ Stikbots

[@MrCampbellPrints]

Each to there own I guess

[@OraliaramosLeeroy]

I buy t13

[@MrCampbellPrints]

Check my etsy store: mrcampbellprints.etsy.com/listing/1692155915

[@simonrafaelpotante3227]

It is the r13

[@MrCampbellPrints]

If you mean t13 , the yes the t13, titan13 ,dummy 13 are all the same model

[@GojiFanAdrian]

@@MrCampbellPrintsno, i think they meant r13, many sellers call them, T13 R13, and other names even tho they are all the same

[@zafarismith886]

i love ti ok
😊🤤

[@MrCampbellPrints]

Thanks

[@zafarismith886]

aaaaaaaaaaa ok ok ok ok🤩😍🤩🥰😅@@MrCampbellPrints

[@filippohl9097]

Bionicles: Pathetic

[@MrCampbellPrints]

they were the dummy 13 of their day

[@AllMighty-t7q]

Enough with the stickbot and t13 war stickbots arent better on both of them are better

[@MrCampbellPrints]

Lol

[@deziosgirl2249]

Bruh

[@MrCampbellPrints]

Hey how can I help

[@patrickbrew3424]

can u pls add better music? i dont like...

[@MrCampbellPrints]

Sorry you don't like the music, but can't do much now the video is uploaded

[@mariegracedaval4070]

Ayo can I buy that please I sub on your account except I don't have TikTok

[@MrCampbellPrints]

mrcampbellprints.etsy.com/listing/1692155915

[@MrCampbellPrints]

Thanks for the support

[@AstralGnome-64]

I am fridge

[@MrCampbellPrints]

Stay cool lol

[@tails_animations...]

i wouldnt really call this animation

[@MrCampbellPrints]

I get it

[@eog172]

E

[@MrCampbellPrints]

F

[@eog172]

​@@MrCampbellPrints G

[@MrCampbellPrints]

H

[@J0K3R-TSE]

L😢

[@MrCampbellPrints]

Glad you made it

[@YaBoi_Kai123]

Stikbot wins low dif

[@MrCampbellPrints]

Each to their own, I guess, I like stikbot to

[@Orania-l8s]

Hou jou Bek

[@Intercepticon_7]

Good work, but this isn't animation.

[@MrCampbellPrints]

Thank you

[@THEONLYSHAD9OW]

He meant stop motion

[@Intercepticon_7]

@@THEONLYSHAD9OW it's not stop motion either

[@Dan64312]

stick bots are better

[@MrCampbellPrints]

If you say so, I prefer dummy 13 personally

[@Dan64312]

@@MrCampbellPrints respect y'alls opinions

[@J0K3R-TSE]

W

[@J0K3R-TSE]

W

[@J0K3R-TSE]

W

[@J0K3R-TSE]

W

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Crazy

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Commitment

[@J0K3R-TSE]

W

[@MrCampbellPrints]

I can't believe

[@J0K3R-TSE]

W

[@MrCampbellPrints]

And more

[@J0K3R-TSE]

W

[@MrCampbellPrints]

😄

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Never forgetting

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Hope your subscribed

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Well that's another one

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Hmmm

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Too much

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Impressive

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Wow

[@J0K3R-TSE]

W

[@MrCampbellPrints]

So many

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Tha ks

[@MrCampbellPrints]

😀

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Wow

[@MrCampbellPrints]

That's alot

[@J0K3R-TSE]

W

[@MrCampbellPrints]

Tell your friends to like share and subscribe

[@MrCampbellPrints]

Great