Are you able to provide the exact measurements of the o rings? Inner/outer/thickness? I ordered the correct inner diameter referenced but they are not as thick and you seem to have more friction. I think that is my point of failure. Fun project and thanks for all these videos!
Thank you. Not really, sorry, I know a lot of people have troubles. SCX24 axles have different diameter, so SCX24 wheel wideners do not work... wider rims and tires could help. Do not have a K10, so did not mess around with this so far.
Thank you. Glue: Toolcraft Ropid 150 no. 886514 (www.conrad.at, .de, .ch, .com). More detailed video (same procedure): ua-cam.com/video/Jx4NsKz0YfE/v-deo.html See comments of this (Mini-Z) video: Loctite 401 should also work, someone commented (I did not test it).
Woww...che gran bel lavoro di precisione....molto utile ...lo devo fare anche al mio Patriot e Arizona ... complimenti... ciao dall'Italia
very excited about this mod ill let you know how it go
Are you able to provide the exact measurements of the o rings? Inner/outer/thickness? I ordered the correct inner diameter referenced but they are not as thick and you seem to have more friction. I think that is my point of failure. Fun project and thanks for all these videos!
They are 1 mm in diameter, so ID 2.5 mm, OD 4.5 mm.
@@donaldsneffe Ahh!! I was off! Thanks for the response ordering these now
Very good and simple mod with a big improvement 🙂🙂👍👍👍👍👍👍👍👍
Excellent job
Great video! can,t wait to modify my mini z rubicon!
Then check the Mini-Z oil filled shock mod video ;-)
@@donaldsneffe I have watch it tiwic😂,very helpful!
Con questo video ...mi son convinto a iscrivermi al tuo canale ... ciao dall'Italia
Great mod! Do you have any advice on how to widen the track of the fms k10 without having any parts 3d printed? Thanks! Keep up the great work.
Thank you. Not really, sorry, I know a lot of people have troubles. SCX24 axles have different diameter, so SCX24 wheel wideners do not work... wider rims and tires could help. Do not have a K10, so did not mess around with this so far.
Nice work. Huge improvement.
How are these working yet? Still holding oil?
Yes.
@@donaldsneffe Thank you! supplies are ordered.
Hey, where did you get those washers? Lol!
Great video and explaination, thank you. Could you please provide Some more detail on the glue you used, or maybe a link to it? Thanks.
Thank you. Glue: Toolcraft Ropid 150 no. 886514 (www.conrad.at, .de, .ch, .com).
More detailed video (same procedure): ua-cam.com/video/Jx4NsKz0YfE/v-deo.html
See comments of this (Mini-Z) video: Loctite 401 should also work, someone commented (I did not test it).
@@donaldsneffe superb, thank you!
Where did you get those from?
From the Patriot.
What is the size of this shock in MM?
Gudjob sir..
These shocks are the Patriot stock shocks?
Yes
What’s the length of the 2.5mm screw
This is not important at all, you simply use it "for help". Cannot be too long.
Have these leaked yet matey?
No, mine still work fine (but I rarely drive)
Denke das sind die bestmöglichen Dämpfer für wenig Geld.