I have just finished 3 days ppf training... It all looks so easy and obvies when expirenced guy like you or trainer is doing. Thank you for thos kind of videos!
In what state you live in? And what’s the name of the company that gives you the trainning, Im in Fort Lauderdale I would like to take a class but i dont know give the class
Your content very much great and hats off to you because u explain in a simple manner. I started a detailing business and i only do exterior detailing, interior detailing, buffing,polishing and ceramic but now I am trying to start ppf i am new to it but because of your explanation i learned the basic . It would be great if you would guide about it bro
Thanks for the tips I have a Jaguar F-Type and man it has so many curves especially the rear quarter panels I got so many lift line on the wheel arches and the back cause I tried to follow someone else's method. Should of known better and followed your methods yours is the best!! I really hope you get one of those cars in and make video on it would love to see how you would tackle that car.
Nice video I wish you had covered the entire bumper. I would have liked to see any additional challenges with the dip or valley, since you have to stretch.
Any tips on wrapping door handles, got a Ram TRX we are doing stealth on and would love input on the handles. Thanks for your time and the videos/tips.
The only thing I can recommend is taking your time. Door handles are small and tedious to install PPF on, and require a lot of patience to be done correctly. Best of luck!
This guy right here. Make sure you let Tru Spray know that Eric from Drive Protected referred you! truspraysystems.com/products/oasis-complete-3-gal-airless-electronic-tru-spray-systems-keg-tank-package-evolutionx-price-starting-at
@user-cz3sd2wh2f that’s all going to depend on your environment and humidity you’re working with. I’d suggest figuring out what works best for you in a 32oz bottle then once figured out, just figure out what that ratio would be in a 5 gallon sprayer.
I just failed installing ppf on the front bumper for a 2021 TLX. Can I use a heat gun to help the material stretch or do you recommend? Mine has a programmable thermostat and I can set it to lower temps rather than the typical 300C+ you'd get with a cheaper heat gun.
eric i love how calm and collective you are, thanks for being so helpful!
I appreciate that!
I have just finished 3 days ppf training... It all looks so easy and obvies when expirenced guy like you or trainer is doing. Thank you for thos kind of videos!
All the best! Email me at eric@driveprotected.shop if you ever need any tips or help!
In what state you live in?
And what’s the name of the company that gives you the trainning,
Im in Fort Lauderdale I would like to take a class but i dont know give the class
You're going to need more than three days training!!
I enjoy your content. You do a great job of explaining and demonstrating what you are teaching.
Thank you for the kind words!
These are the little tricks that make a great job! Thanks
I am glad that you find value in these!
Would love to see how you PPF a bike like Harleys. Awesome content man greetings from Chile ❤
Your content very much great and hats off to you because u explain in a simple manner. I started a detailing business and i only do exterior detailing, interior detailing, buffing,polishing and ceramic but now I am trying to start ppf i am new to it but because of your explanation i learned the basic . It would be great if you would guide about it bro
Thanks Eric great video!
Glad you liked it!
Great Tutorial very explanatory
Thanks for the tips I have a Jaguar F-Type and man it has so many curves especially the rear quarter panels I got so many lift line on the wheel arches and the back cause I tried to follow someone else's method. Should of known better and followed your methods yours is the best!! I really hope you get one of those cars in and make video on it would love to see how you would tackle that car.
Thank you for the kind words! If I ever get one in the shop, I’ll be sure to make a video on one!
Yes what’s in the spray bottle ?. Thank you for the info on fixing the fingers and the edges .
Slip and tack solution.
Very nice demo video
Nice video
I wish you had covered the entire bumper.
I would have liked to see any additional challenges with the dip or valley, since you have to stretch.
Thanks this was a good video
Glad you enjoyed it
Any tips on wrapping door handles, got a Ram TRX we are doing stealth on and would love input on the handles. Thanks for your time and the videos/tips.
The only thing I can recommend is taking your time. Door handles are small and tedious to install PPF on, and require a lot of patience to be done correctly. Best of luck!
@@DriveProtected the patterns are terrible for stealth wrapping them, thanks for the input though. Keep up the good work as well.
Thanks for the video! What is your dilution ratio for the slip and tack solutions? Thanks so much!
Slip all depends on room temperature. And tack solution is just hot water with nothing mixed.
This shit is super satisfying.. maybe even more than vinyl
If you have kegs for your tack and slip solution, how would you keep your solutions warm?
I only use a keg for the slip solution. To keep the tack solution warm, I just use a 32 ounce spray bottle that I refill as needed.
Do you have a controlled temperature for your tac solution, if so, what is it? Thanks
Hot water
What tac ?
What pressurized spray tank are you using
TruSpray Systems Spray Keg
@@DriveProtected sweet thanks
@88omarz reach out to them and say Drive Protected sent you. They may give you a discount!
@@DriveProtected sounds good thanks much
What tank/sprayer are you using?
This guy right here. Make sure you let Tru Spray know that Eric from Drive Protected referred you! truspraysystems.com/products/oasis-complete-3-gal-airless-electronic-tru-spray-systems-keg-tank-package-evolutionx-price-starting-at
What's your mixing ratio for that? I have the 5 gallon so how much slip would be a starting point to how many gallons?
@user-cz3sd2wh2f that’s all going to depend on your environment and humidity you’re working with. I’d suggest figuring out what works best for you in a 32oz bottle then once figured out, just figure out what that ratio would be in a 5 gallon sprayer.
Question... is there any chance someone could work alone to install ppf on a complete vehicle? Thanks
Oh yeah! Done it many times. Just takes time and patience.
I just failed installing ppf on the front bumper for a 2021 TLX. Can I use a heat gun to help the material stretch or do you recommend? Mine has a programmable thermostat and I can set it to lower temps rather than the typical 300C+ you'd get with a cheaper heat gun.
I strongly recommend using a steamer or hot water to stretch PPF. Heat gun will damage the film very easily.