How to wrap those deep recesses (channels) the right way! (surprise way!)
Вставка
- Опубліковано 29 вер 2024
- Wrapping those deep recesses on a van can be tricky and lead to problems after the van leaves your workshop. It's one of the main reasons a customer will return unhappy. If your vinyl has been popping out of the crevices then chances are you've been using the wrong technique. Here in this video, Marco from Sott demonstrates the best technique in applying vinyl to those deep recesses.
That is by far the best demonstration I’ve seen. Straight to the point and without goofy music.
at what temperature do you heat the vinyl so that by pressing in the recess it stretches without wrinkling the vinyl?
Good tip, but you should have shown the 2 methods completed, it was edited out😵
And what happens if you need to remove the vinyl after a few years with that "glue" you've added? BTW, great effort putting the video together... pity about the spell check!
Yup
He says so in the video....
I dont get it... U could see that he is doing it wrong... The vinyl wasnt enaugh to be stretched and could ... Well if u put glue or primer might as well jst do the "oldway" as u call it
Those primers fucks up the car and it's a pain in the ass to get them off after removing the wrap. POST HEAT GUYS POST HEAT! That's makes sure that there will be no pull back not that shit, no..
They never tell you the full story, use a decent product for the job and you don’t need another added process and your spot on with the removability
What’s the name of the applicator/adhesive ?
great concept, thanks
There were bubbles being pressed out and the primer always grabs the vinyl on me in the wrong spots. This is a good idea but not easy in the real world. Use a roller, post heat and pray...
and if by pure chance, when heating the adhesive where it must remain raised and then stretch, it first sticks to the bodywork because it is rounded, does the adhesive stretch smoothly afterwards or not? how can i prevent it from sticking sooner?
Thank you friend. Very helpful.
We're really happy that you liked it! Thank you!
You have literally left Ur self no room you need a bigger area of bridged material so u have more material and the hear also won't effect the material closer to the recess area
Great information! Thank you for sharing your techniques! it is very helpful!!!
Good Job man, you can even heat it lower from the center of the window
Please what is name the (Heated device) product?
You are the man!
how to wrap grooves
Fabulous
I enjoyed this video sooo much thank u for showing us this good techniques i appreciate that soo much n your chanel n your honorable company the best for me ever
So where the fuck was the “deep” recess?