I purchased this planer ua-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL to replace a well worn Delta bench top I'd had for a number of years. I should have purchased it sooner. The performance is much better than I expected from a bench top planer, and the best I've used so far. When feed and discharge supports are properly set snipe is all but eliminated. Cuts are smooth and free of flaws. Setup was dead right out of the box. Feed rate is smooth, steady and sure. The standard (fast) feed rate left rough sawn cherry smooth and with little sanding to be done for a fine finish. After 100 board feet of hardwood the knives were still sharp and performing well with clean sharp cuts. The dust blower system is phenomenal! With my dust collector connected and after 100 board feet there was little if any waste left to sweep up. It works and works very well.The unit is heavy. It's a bit of a beast weighing just under 100 pounds. The optional table/mobile base is very nice and makes a sound and sturdy platform for the planer. However, the instructions are rather lacking. If you're mechanically inclined there should be no real assembly problems other than an potential for extreme disgust. But it is a nice table.
Check your technique....dont just drive them in long stoke cuts back amd forth let the blade do the work.... Theres a video of a guy doing tests and he video tapes hoth techniques and driving it in under slow motion causes the disk to turn to dust
L'idée est bonne mais alors il n'y a aucune sécurité (carter de protection et arrêt d'urgence). avec ce genre de machine un accident est si vite arrivé (au mieux on y laisse un bras et au pire on y laisse la vie).
Turn it on its side make a hopper and then you can put the small pieces into it and grind it more. Great idea you have there.
Thanks for your suggestion bro
Something about this is oddly enough just so satisfying to watch.
Good job creating this custom piece of machinery!!!
Thank you very much bro
Ideale per tagliare grissini!!!!
I purchased this planer ua-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL to replace a well worn Delta bench top I'd had for a number of years. I should have purchased it sooner. The performance is much better than I expected from a bench top planer, and the best I've used so far. When feed and discharge supports are properly set snipe is all but eliminated. Cuts are smooth and free of flaws. Setup was dead right out of the box. Feed rate is smooth, steady and sure. The standard (fast) feed rate left rough sawn cherry smooth and with little sanding to be done for a fine finish. After 100 board feet of hardwood the knives were still sharp and performing well with clean sharp cuts. The dust blower system is phenomenal! With my dust collector connected and after 100 board feet there was little if any waste left to sweep up. It works and works very well.The unit is heavy. It's a bit of a beast weighing just under 100 pounds. The optional table/mobile base is very nice and makes a sound and sturdy platform for the planer. However, the instructions are rather lacking. If you're mechanically inclined there should be no real assembly problems other than an potential for extreme disgust. But it is a nice table.
very good
Thank you very much dear
Yeah. Doing Great Man. 👌👌
Thanks dude
Magnifique. Love it. How did works with dry-wood?
Thank you very much dear
SUPER 👋👋👋
Thanks dear
Just put a cover on it with a hole for sticking the branches in....just make sure its deep enough so people cant put their fingers into it
Ok thanks for your suggestion bro
🤔 👍 💪 👌
hi
Can you write the materials you used?
Likeee...ss...dez...
Thanks man
Hi Ok
Hi
,e para que serve esses pedaços de paus?
Weldon bro. Please what country is this from
Thanks bro. I'm from India
I can never get cutoff wheels to last like this
Check your technique....dont just drive them in long stoke cuts back amd forth let the blade do the work.... Theres a video of a guy doing tests and he video tapes hoth techniques and driving it in under slow motion causes the disk to turn to dust
It is very dangerous, please be sure to observe safety
Passe pra nos. A Medidas ok
L'idée est bonne mais alors il n'y a aucune sécurité (carter de protection et arrêt d'urgence). avec ce genre de machine un accident est si vite arrivé (au mieux on y laisse un bras et au pire on y laisse la vie).
Non conforme et dangereuse