Thanks for sharing your problem solving. I appreciate your honest and trial and error approach. Most of us deal with these kinds of delemas all the time so nice to we are not alone or doing something wrong.
Hey John, let’s face it, with nearly everything we do, there’s something to overcome, if we’re exploring new ways of doing things. Certainly if I make another of those, I’ll do it in a slightly different way, with less issues 😁😁😁
Many thanks Mr Nayler! Very kind of you to say so. Here’s a video that shows off my variation of work quite well, for your viewing pleasure: ua-cam.com/video/fzbRHcgWOX0/v-deo.html I’d offer you tickets to a London art show, but not you’re up in WY 😞 Off to do a show at Goodwood Racecourse in a couple of week 😁
It’s absolutely amazing and awesome at the same time. Thank you for sharing. I’m a new subscriber as of today. Keep up the good work and I’m looking forward to seeing your future videos.
Hi John, welcome along! Great to have you on board. I’ll be recording and releasing more video later this year, been a bit of a busy start to 2024 😮💨 Love Mike, he’s taken off and I’ve been with him since the start of his UA-cam journey 👍 I refined the process of the making of the offset bowl, which you may have seen already: ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=CleVrIKEsPYzICCV
Lovely bowl especially with the gold leaf around the edge. I actually held my breath when it was shaking 🙈 good old duck tape to the rescue lol. Ps love the umbrella pen 🤣
Another masterpiece Richard. You had me cringing at the beginning with all the vibrations but a very clever way to fix it. Beautiful bowl and with the gilding it just puts the cherry on top. Lenore does an amazing job. You should teach wood turning. You explain everything you are about to do so well. Thanks for sharing again. Cheers 🇦🇺
My pleasure John, yer was a little hairy with it unbalanced! Re teaching, that’s kinda why I’m doing these videos, to share the love as I like to call it, and help people see the possibilities 😁😁😁
Thank you Archie 😊 I’ve since made another video on the same subject, with clearer instructions on an easier process: ua-cam.com/video/Sx82bqKPcaM/v-deo.html I hope you enjoy ☺️
Wonderful turning with a beautiful result. About three years ago I bought a piece of Lignum Vitae, cylindrical measuring 12 inches in diameter and 15 inches tall. I can barely lift it and each year I promise to get it on the lathe in the winter make something out of it. Alas, it's still sitting there as I can't make up my mind what to do with it. I really must knuckle down and get to work on it as you've inspired me.
@@alansimpson596 it's unlikely that what you have is genuine lignum. the cylinders you find are all Argentine Lignum also called Palo Santo. they are also much more green in colour when left in sunlight. Genuine lignum was never turned into those large cylinders you can buy. they were left as logs with the sap wood on or cut as octagons like you can see in Dicks video.
I have to admit when I saw your lathe jumping and dancing it made my heart sink. I have had that glue let go before Kliebert is the best in the world You do exceptional work. Good on you.
Beautiful result. Interestingly, I do off-center bowls in the reverse order. First, I turn the outside of the bowl normally--on a worm screw. I sand and finish. Then I take the blank off the lathe and draw out my interior on the top. I drill a second worm screw hole in that center and remount the blank. I cut a mortise along that axis and then reverse the blank and hollow out the bowl, then sand and finish the top and the interior. For me, this has the advantage that even once it's reversed off-center, it's at least round so it doesn't shake quite so much. Plus, I know what my fimal shape is so I can position the bowl more accurately. And I can sand the outside while it's centered, which reduces wear and tear on me.
Hi Devinder, thank you! I think it was worth the effort to get there 😁 I perfected the method of making to make it easier for others to make: ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=XwvXbuZyWL9yg56A And this one is one of my favourites: ua-cam.com/video/EXp0H8OB60A/v-deo.htmlsi=bdFZUxy39QjuLqGQ I look forward to more of your comments 😁😁😁👍❤️
What a lovely bowl! I am working on a similar vessel, but have started on the outside, turning off centre for the cavity. Still trying to fix my mistakes!😊
Thank you Stephanie (one of my favourite names BTW!) You’ll manage it, and now you have another method to try for next time 😁😁😁 (unless you knew this way already)
Excellent work, lovely piece of art. I have the lottery of owning a lot of this wood, it is quite interesting how behaves after been turned, or wetted...did your piece turned greener after a while?
Hiya, I LOVE it! Yes indeed, a lovely dark green! It actually moved quite a lot within a couple of months, so I refinished the whole thing by hand. It looked amazing again and then didn’t move anymore. It’s the weight I LOVE most I think 🤔 😁👍 I hope your making beautiful things too 😍
@@WoodWithD I figured...this wood never dries completely I guess due to the high oil content, so, movement is quite normal...some of the pieces I own are 50 years old...and still not fully dry. I'm making some good stuff, basically anything that I want to last forever...genuine LV is even harder than argentine (19Kn, vs 17Kn in the janka scale)
Thank you Mr Bradlad. Oh hell yes! I don’t show all the stop starts in the video for sharpening the tools, but I had 3 bowl gouges on the go, sharpen 3, when 1 blunts, grab another till blunt, repeat, then resharpen.
@@WoodWithD My only critique (and it is not about your woodturning) is that, if you include music with your videos, use tolerable music rather than a mind-numbing repetitive loop. If there were no narration, viewers could opt to mute the video. But the narration is quite important here so keen viewers have to endure what is used in Guantanamo Bay as a torture technique. Just a thought.
@@rontocknell5400 🤣🤣🤣👍 Noted Ron, just sitting here editing the next video that should be out later this eve and I’m NOT going to put ANY music to it, just to keep you happy ☺️☺️☺️☺️ But to make you aware, I’ve had a song I’ve heard recently, that I’m going to be singing this weekend while making another piece (howling some might call it) and it will be in a future video 🤣🤣🤣
@@WoodWithD Songs are fine with me, Dick. But repetitive loops make me want to reveal national secrets... and I don't know any. I think most viewers are fine with the sounds of woodturning.
@@WoodWithD just grab the model number, I will be able to look up the specs. I would like to get something that size for my shop but it's the sort of purchase you only want to do once :D
@@OriginsOfMo will check this eveninh mate, currently in the home office doing day job (supposedly 😀) and get back to you here. Bought second hand, replaced the guides for the roller type, other than that cracking machine!
@@OriginsOfMo sorry for the Delay Mike, the Bandsaw I have came from a carver who was upgrading. It’s a floor standing Perform Bandsaw Model CCVBB with a max cut depth of 230mm and max width of 380mm. Axminster now do the more modern version and you’ve made me look at their website and now I’m considering the Axminster Trade AT3327B! 😀😀😀
In due course, you should have your planer connected to your dust collection. Also where did you get that fancy pencil🤷♂️ are you sure you have that lathe bolted down 😧
Hello mate, to answer your queries: Planer is now connected, since making that video. Fancy pencil came from a tropical zoo I visited in the midlands. I’m going to the area again soon, shall I get one for you? Lathe defo bolted down but only daily small bolts 😢
@@WoodWithD very nice of you but in my shop pencils get destroyed and or lost. The bowl, the process, the commentary, all mate keep up the good work and get larger bolts
Welcome Halloweeninator (that’s a mouthful! 🤣) Fortunately for me I’ve got gripper jaws on that OLD chuck I used, so I don’t need to taper, just do it up tight. I’m shortly going to be doing another off centre bowl out of greenheart this time, and going to use a lot better, slightly safer, method of making this type of bowl. And specially for you I’ll use a tapered chuck grip 😁👍 Probably be in a few weeks time, so if this is going to be a project for you, can you wait a few weeks, stick around and the new video will follow 😁👍👍👍
Can I ask how you sanded this up I find it chokes the sandpaper up very quickly, I thought maybe there was another way or just patience and keep changing the paper
Unfortunately, if you wanna keep the lush oil finish, the clogging sandpaper and changing it is the way to go. I’ve heard some talk about using various chemicals to wipe away the surface oils in order to sand, but I’d rather do it old school. Good way to use up older sandpaper that I know you’ve got a pile off! 🤣🤣👍
I’m so sorry Steve! I went to Timberline, Tonbridge, for some more sander sealer and spotted that while there and had to buy it! There were bits there that were ALOT bigger, some that I’m not sure I could lift on my own!
@@jefferybilling9093 difficult to say, depends what kinda fair you are selling it at, but I’ll be selling it at an art fair and I’d likely put a price tag on it in the UK for £750, but accept £650 if they were bartering. It is Genuine Lignum (not cheap for the blank) and with real gold 😁😁😁
You used wood glue that is not a structural wood glue for a structural joint which is inherently dangerous. A structural grade of epoxy would have been a safer choice. A large faceplate allows screwing counterweights to the faceplate for a perfect balanceand safety.
Charlie, you are right. He didn’t even scuff up the surfaces before applying the glue. 🤷♂️ I hope Dick uses better safety procedures in the future but then again, it’s the danger that keeps me watching and it makes the popcorn taste better.
I am amazed that anyone would actually take the time to write this. You do know any interaction with a video, positive or negative, counts as a positive towards the channel.
Very clever and amazing results,,,,,,,love the way you show the full details of how you do things …
Beautiful work Dick. Very well done.
Thank man, look forward to seeing your video making one 😁
Thanks for sharing your problem solving. I appreciate your honest and trial and error approach. Most of us deal with these kinds of delemas all the time so nice to we are not alone or doing something wrong.
Hey John, let’s face it, with nearly everything we do, there’s something to overcome, if we’re exploring new ways of doing things. Certainly if I make another of those, I’ll do it in a slightly different way, with less issues 😁😁😁
Nice bowl I like the texture
Thank you very much 😁
Another amazing piece of work
Thank you Boetie 🎀😁
Beautiful creation👍👍👍 Thanks for sharing
My pleasure 😁😁😁
One of the nicest pieces I've ever seen. Well done Sir.
Thank you kindly DCon 😁😁😁
Stunning, you are an inspiration.
Thank you Raymond! Are you going to make one soon?
Stunning piece Richard! The choice of wood was perfect and the workmanship is excellent!
🥰 thank you for taking the time to comment sir. Thank you ever so much for your kind words 😀😁
Agree. It was a perfect marriage between design and material.
@@MsMMBell thank you Marty! It’s got a gorgeous weight to it when you lift it! Finished bowl is just under 3kg 😊
Beautiful wood! Beautiful bowl!
Thank you my friend 😁😁😁👍
Absolutely fantastic.
Thanks mate! Me like comments like that! 😁😁😁😁
That is fabulous!! To see what it was to the end result is just amazing 🤩
Thanks sis
Beautiful bowl and I love the fact you show your thought process behind solving the problems you encounter. Duck tape fixes everything! 😀
🤣🤣🤣🤣 Not everything! But did the job here 😁👍
Very pretty piece. Love your balancing technique 👍
Hey, it worked 😁😁😁 More luck than judgement!
very nice piece of work. a good description of how you were doing things as well.
Thank you kindly 😊😊😊
Absolutely amazing. Love the pattern of the grain. You make it look so easy which is the art of a professional
Many thanks Mr Nayler! Very kind of you to say so.
Here’s a video that shows off my variation of work quite well, for your viewing pleasure: ua-cam.com/video/fzbRHcgWOX0/v-deo.html
I’d offer you tickets to a London art show, but not you’re up in WY 😞
Off to do a show at Goodwood Racecourse in a couple of week 😁
So Amazing!
Aww, thank you John 😁😁😁
Beautiful bowl and I loved watching the process as it evolved. Fascinating.
Thank you Tessa! I hope you stick around to see future makings and enjoy some of the others - I await your comments in due course 😊😊😊
Oh! I just recognised the name! 🤣🤣🤣😘
Beautiful, Stunning how you can make something so pretty out of a lump of wood like that,!!!!! ❤️ ❤️ ❤️
Lump of wood? Look this wood up, its so dense it won't even FLOAT, and they use it for bearings in hydro dams!
I wathed this and though how brave is this guy, look at that lathe dance. stunning piece !!
It’s absolutely amazing and awesome at the same time. Thank you for sharing. I’m a new subscriber as of today. Keep up the good work and I’m looking forward to seeing your future videos.
Thanks Patrick, t’was a fun one to make! You’ll be able to get in on the 1,000 subscriber thank you vid draw I’ll be putting up something soon too 😁😁😁
Looks gorgeous
Thanks mate 😁😁😁😁👍
Excellent work my boy! 🤗
Thanks Dad, I do what I can to make you proud 🤗
Such a great work of art and a unique bowl I like it very much 😀
Thank you very much Tim
That is fantastic work. I will try these also in future😃😃😃😃
I look forward to your video 😁😁😁👍
Stunning.. Absaloutly beuteful. Mike recommend your channel, so clad, I will be following closely.
Hi John, welcome along! Great to have you on board. I’ll be recording and releasing more video later this year, been a bit of a busy start to 2024 😮💨
Love Mike, he’s taken off and I’ve been with him since the start of his UA-cam journey 👍
I refined the process of the making of the offset bowl, which you may have seen already: ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=CleVrIKEsPYzICCV
Lovely bowl especially with the gold leaf around the edge. I actually held my breath when it was shaking 🙈 good old duck tape to the rescue lol.
Ps love the umbrella pen 🤣
😁🤣🤣🤣 yer, ‘twas a little hairy! 🤣🤣🤣
Umbrella PENCIL rules! There’s even a little island rubber it sits in! 😁😁😁
Absolutely magical
Beautiful! The gold added a great embellishment.
Thanks mate, yup, Lenore has skills with that stuff! It’s beyond me!
Didn't think this was possible until you did it! 😳 wow such a beautiful piece!! Thanks for the education it was very entertaining as well 😊
That’s very kind of you to say sir. What can I say, I try to entertain 😁🤣
Another masterpiece Richard. You had me cringing at the beginning with all the vibrations but a very clever way to fix it. Beautiful bowl and with the gilding it just puts the cherry on top. Lenore does an amazing job. You should teach wood turning. You explain everything you are about to do so well. Thanks for sharing again. Cheers 🇦🇺
My pleasure John, yer was a little hairy with it unbalanced!
Re teaching, that’s kinda why I’m doing these videos, to share the love as I like to call it, and help people see the possibilities 😁😁😁
@@WoodWithD you are doing a fantastic job of teaching I’m learning a lot
@@johnswettenham4560 hey John, you seen the latest video? My car! 😁😁😁
⁵
Superbly crafted!
Thank you Archie 😊 I’ve since made another video on the same subject, with clearer instructions on an easier process:
ua-cam.com/video/Sx82bqKPcaM/v-deo.html
I hope you enjoy ☺️
Here’s to getting 1000 subscribers. Looking forward to diving into your content!
Thanks Chris! Shouldn’t be long now with your help 😁😁😁😁😁😁😁😁😁
Beautiful project!
Cheers Scot! 😊 You gonna make one?
Stunning
Thank you Mr Mills! From Richard (Dick) Mills 😁😁😁😁
Wonderful turning with a beautiful result. About three years ago I bought a piece of Lignum Vitae, cylindrical measuring 12 inches in diameter and 15 inches tall. I can barely lift it and each year I promise to get it on the lathe in the winter make something out of it. Alas, it's still sitting there as I can't make up my mind what to do with it. I really must knuckle down and get to work on it as you've inspired me.
Well if you’d like me to come collect it 🤣🤣🤣
Purely out of interest, what part of the world are you in sir?
@@WoodWithD Northern Ireland..
Wy wife has suggested that I get some more Lignum Vitae and make a canoe for myself 🙂
@@alansimpson596 pmsl! 🤣🤣🤣 She’s a smart one 🤣🤣🤣🤣
For anyone else reading this - Lignum sinks in water! 😁😁😁🤣
@@alansimpson596 it's unlikely that what you have is genuine lignum. the cylinders you find are all Argentine Lignum also called Palo Santo. they are also much more green in colour when left in sunlight. Genuine lignum was never turned into those large cylinders you can buy. they were left as logs with the sap wood on or cut as octagons like you can see in Dicks video.
You are spot on Steve, very luckily Bulnesia Arborea, Verawood or sometimes also called Palo Santo, not LV or Guaiacum Sanctum@@steveearis4786
I have to admit when I saw your lathe jumping and dancing it made my heart sink. I have had that glue let go before Kliebert is the best in the world You do exceptional work. Good on you.
Thank you Bruce 😁
I’ve since perfected a safer, far leas bouncy method of making these 🥳:
ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=gCA-nEyg8HJi5umf
Beautiful result. Interestingly, I do off-center bowls in the reverse order. First, I turn the outside of the bowl normally--on a worm screw. I sand and finish. Then I take the blank off the lathe and draw out my interior on the top. I drill a second worm screw hole in that center and remount the blank. I cut a mortise along that axis and then reverse the blank and hollow out the bowl, then sand and finish the top and the interior. For me, this has the advantage that even once it's reversed off-center, it's at least round so it doesn't shake quite so much. Plus, I know what my fimal shape is so I can position the bowl more accurately. And I can sand the outside while it's centered, which reduces wear and tear on me.
Hi Leigh. That sound very awsome, but, wouldn’t there then be two chuck grips in the base?
Woooow.. Thats the real masterpiece❤❤❤
Hi Devinder, thank you! I think it was worth the effort to get there 😁
I perfected the method of making to make it easier for others to make:
ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=XwvXbuZyWL9yg56A
And this one is one of my favourites:
ua-cam.com/video/EXp0H8OB60A/v-deo.htmlsi=bdFZUxy39QjuLqGQ
I look forward to more of your comments 😁😁😁👍❤️
Beautiful piece👏
Thank you very much Jon 😁👍
Very nice. Something I'll have to try
It is a fun piece to make and you get the right piece of wood and it can look stunning 🤩
Good vid mate. Looked nice in the end. Felt sorry for your lathe at beginning though
Thanks mate. Yup, defo think it would have died or broke if I’d carried on!
What a lovely bowl! I am working on a similar vessel, but have started on the outside, turning off centre for the cavity. Still trying to fix my mistakes!😊
Thank you Stephanie (one of my favourite names BTW!)
You’ll manage it, and now you have another method to try for next time 😁😁😁 (unless you knew this way already)
Love it! Perfect for my corn fakes :-)
Nice work!
🤣🤣🤣🤣🤣🤣🤣🤣
Now that is a thing of beauty
Thanks Tim! Admittedly one of my top 3 favourite woods and Also very pleased with the result 😁😁😁👍
Amazingly beautiful 👌
Thank you Sioconian! 😁😁😁🙏
Looks good.
Thank you Brad 👍😁
That was a little bit scary when you first turned it on 😅 but wow doesn't that look awesome and the gilding really finishes it, fantastic turning 👍
Thank Chris, yer, you can certainly tell from my nervous laughter that I thought it scary too! You gonna have a go at making one?
@@WoodWithD I do not think my little lathe or my heart could handle that 😂
@@Chris-kr7rq 🤣🤣🤣 You could make a small one! 😁😁😁
@@WoodWithD if I do I will let you know
That is beautiful piece of wood and turning where can some buy some wood like that
Thank you sir. Where in the world do you live?
Wow!
Did you enjoy the video? Favourite bit?
Très jolie bravo 👍👏🇨🇭
Thank you Denis 😁😁
Excellent work, lovely piece of art. I have the lottery of owning a lot of this wood, it is quite interesting how behaves after been turned, or wetted...did your piece turned greener after a while?
Hiya, I LOVE it! Yes indeed, a lovely dark green! It actually moved quite a lot within a couple of months, so I refinished the whole thing by hand. It looked amazing again and then didn’t move anymore. It’s the weight I LOVE most I think 🤔 😁👍
I hope your making beautiful things too 😍
@@WoodWithD I figured...this wood never dries completely I guess due to the high oil content, so, movement is quite normal...some of the pieces I own are 50 years old...and still not fully dry. I'm making some good stuff, basically anything that I want to last forever...genuine LV is even harder than argentine (19Kn, vs 17Kn in the janka scale)
Beautiful, stunning piece! Does the hard, oily Lignum affect the sharpness of the cutting edges? Do they need sharpening more often?
Thank you Mr Bradlad.
Oh hell yes! I don’t show all the stop starts in the video for sharpening the tools, but I had 3 bowl gouges on the go, sharpen 3, when 1 blunts, grab another till blunt, repeat, then resharpen.
Che bel lavoro !
Thank you kindly!
Have you seen this one too? It is a more up to date method 😊
ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=7eSKCPwhO6osYsxm
VE-E-E-ERY NICE!!!
🤣🤣🤣🤣 Cheers Ron 😁😁😁😁👍
@@WoodWithD My only critique (and it is not about your woodturning) is that, if you include music with your videos, use tolerable music rather than a mind-numbing repetitive loop. If there were no narration, viewers could opt to mute the video. But the narration is quite important here so keen viewers have to endure what is used in Guantanamo Bay as a torture technique.
Just a thought.
@@rontocknell5400 🤣🤣🤣👍
Noted Ron, just sitting here editing the next video that should be out later this eve and I’m NOT going to put ANY music to it, just to keep you happy ☺️☺️☺️☺️
But to make you aware, I’ve had a song I’ve heard recently, that I’m going to be singing this weekend while making another piece (howling some might call it) and it will be in a future video 🤣🤣🤣
@@WoodWithD Songs are fine with me, Dick. But repetitive loops make me want to reveal national secrets... and I don't know any. I think most viewers are fine with the sounds of woodturning.
Fine job mate! Brian…
Thanks Brian! Was also a fun job, as you saw from the video 🤣👍👍
Beautiful bowl Dick! Out of curiosity, what size is your bandsaw?
Hey Michael, I’ll get the ruler out later, you mean maximum cut depth?
@@WoodWithD just grab the model number, I will be able to look up the specs. I would like to get something that size for my shop but it's the sort of purchase you only want to do once :D
@@OriginsOfMo will check this eveninh mate, currently in the home office doing day job (supposedly 😀) and get back to you here. Bought second hand, replaced the guides for the roller type, other than that cracking machine!
@@WoodWithD Thanks :D
@@OriginsOfMo sorry for the Delay Mike, the Bandsaw I have came from a carver who was upgrading. It’s a floor standing Perform Bandsaw Model CCVBB with a max cut depth of 230mm and max width of 380mm. Axminster now do the more modern version and you’ve made me look at their website and now I’m considering the Axminster Trade AT3327B! 😀😀😀
Beautiful! Where do I go to see all your work and with costs?? Thank you very much.
Hi Andrew, there’s a handful of things on our website, www.mothandmirror.com but better to come to a show. Where in the world are you?
In due course, you should have your planer connected to your dust collection. Also where did you get that fancy pencil🤷♂️ are you sure you have that lathe bolted down 😧
Hello mate, to answer your queries:
Planer is now connected, since making that video.
Fancy pencil came from a tropical zoo I visited in the midlands. I’m going to the area again soon, shall I get one for you?
Lathe defo bolted down but only daily small bolts 😢
@@WoodWithD very nice of you but in my shop pencils get destroyed and or lost. The bowl, the process, the commentary, all mate keep up the good work and get larger bolts
@@gianallele1 I will get some larger bolts sir! 🔩🔩🔩🔩😁
Beautiful piece Dick! When you use the Forstener drill bit do you taper or just leave straight sides?
Welcome Halloweeninator (that’s a mouthful! 🤣)
Fortunately for me I’ve got gripper jaws on that OLD chuck I used, so I don’t need to taper, just do it up tight.
I’m shortly going to be doing another off centre bowl out of greenheart this time, and going to use a lot better, slightly safer, method of making this type of bowl. And specially for you I’ll use a tapered chuck grip 😁👍
Probably be in a few weeks time, so if this is going to be a project for you, can you wait a few weeks, stick around and the new video will follow 😁👍👍👍
excelant
Thank you kindly 😁👍
Add your counter weight to the sacrificial face plate
Indeed, but fortunately I found a better way to make these types of bowls 😁: ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=QGpyAzWkrmpRi29u
Can I ask how you sanded this up I find it chokes the sandpaper up very quickly, I thought maybe there was another way or just patience and keep changing the paper
Unfortunately, if you wanna keep the lush oil finish, the clogging sandpaper and changing it is the way to go. I’ve heard some talk about using various chemicals to wipe away the surface oils in order to sand, but I’d rather do it old school. Good way to use up older sandpaper that I know you’ve got a pile off! 🤣🤣👍
Traitor... you didn't buy the wood from me. noooooooooooooo......
cracking job with that as usual mate but where did you find a lump that big???
I’m so sorry Steve! I went to Timberline, Tonbridge, for some more sander sealer and spotted that while there and had to buy it! There were bits there that were ALOT bigger, some that I’m not sure I could lift on my own!
@@WoodWithD i was only joking mate, not surprised that Bob has some good stuff there. in all honesty i'd be tempted too...
Out of interest what would you value this at as a finished piece
Hi Jeffery, in what country?
Australia
@@jefferybilling9093 difficult to say, depends what kinda fair you are selling it at, but I’ll be selling it at an art fair and I’d likely put a price tag on it in the UK for £750, but accept £650 if they were bartering. It is Genuine Lignum (not cheap for the blank) and with real gold 😁😁😁
About what I was expecting, perhaps a little more for such a beautiful piece.Thank you for the reply
@@jefferybilling9093 thank you mate, that’s very nice to hear 😊😊😊
WOW
🤣 thank you kindly 👍😁
Thank you kindly 😊 I’ve perfected the the process now: ua-cam.com/video/Sx82bqKPcaM/v-deo.htmlsi=Ypflv81Fa2o1nvb7
Complex method
Hi Craig, yer, I could have made the whole process a lot easier if I’d cut a longer length of Lignum. But I was pleased with the end result 😁👍
Your lathe got a little Squirelly when u turned it on.
Just a little bit! I did try, but as said in vid, I think it would have killed (damaged) the lathe. And likely left me dizzy! 🤣🤣🤣
your nuts ,,,,,,but great job
Yarp, and thank you kind sir 😁😁😁🙏
You used wood glue that is not a structural wood glue for a structural joint which is inherently dangerous. A structural grade of epoxy would have been a safer choice. A large faceplate allows screwing counterweights to the faceplate for a perfect balanceand safety.
Thank you Charlie, I’ll look into a large faceplate for future one - many thanks 😊
Thanks Charlie. Where would we be without the You Tube safety patrol having our backs.
Charlie, you are right. He didn’t even scuff up the surfaces before applying the glue. 🤷♂️ I hope Dick uses better safety procedures in the future but then again, it’s the danger that keeps me watching and it makes the popcorn taste better.
Sorry not a fan of your what ever you did
That’s okay. Thanks for watching and commenting Patrick.
I am amazed that anyone would actually take the time to write this. You do know any interaction with a video, positive or negative, counts as a positive towards the channel.
Hey Patrick, don't be such a meanie.🤪