How to Make a 2 Color CNC Sign | ToolsToday Video

Matt shows you how he made a 2 color sign on the AR8 Basic 24"x48" using Amana Tool® industrial CNC router bits available on our website, www.toolstoday.com/?...
What do you think of how this project video turned out?
The downloadable and customizable CNC plans are available on our website item no. CNCNAU if you’d like to make for yourself!
www.toolstoday.com/nautical-w...
Feed, Speed & CNC Running Parameters
Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
toolstoday.com/v-13779-46202-k-bit.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth per pass: 0.25”
Amana Tool RC-45711 In-Tech Insert Carbide V Groove 90 Deg x 11/16 D x 21/64 CH x 1/4 Inch SHK Single Flute Router Bit
www.toolstoday.com/v-10600-rc...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
The tabs were cut free and he used the Amana Tool no. MR0102 flush trim bit to trim the tabs and then the Amana Tool no. MR0112 Mini roundover bit to roundover the back edge of the piece. These mini bits have a 3/16" ball bearing that makes getting into the tight areas easy! The piece is now done!
Links
** Subscribe - / toolstoday
** Shop the website - www.toolstoday.com
** Like at Facebook - tinyurl.com/toolstoday-facebook
** Follow on Instagram - / toolstoday
More Links
Amana Tool® www.amanatool.com
Axiom AR8 Pro V5 24 x 48 CNC Machine
www.toolstoday.com/axiom-ar8-...
Vectric V-Carve Pro Software www.toolstoday.com/cnc-machin...

[@DTWMTX]

Great video & project... Wish you had more of the design of it. Not the 'Plans on our website' spiel.

[@ToolsToday]

We understand and will try to incorporate this into future projects, thanks!

[@amolbansode9822]

Thank you so much... 👍

[@cncwoodcrafofficial]

v bit carving good job

[@waynebussert5180]

I use the Oramask and the Amana RC1045 and never get a clean cut like you do. What do you do differently?

[@ToolsToday]

if you could please share your feed and speed cutting parameters. thank you.

[@JD-nq4vb]

I see in your videos you use a few different CNC brands. I'm curious which brand you think is the best because I am considering buying the Stepcraft M1000. I do not want to feel like I need to upgrade in 5 years so I want buy the best I can get to start with then maybe in 8-10 years I'll see where I am, but definitely want it to last 5 years minimum w/o upgrade. Curious about your opinion on all your CNC's you use. (Guitar builds mostly).

[@kcoop99]

I need to clean up the edges of 1/4" acrylic, would that mini round over bit work for me?

[@ToolsToday]

we recommend using either this www.toolstoday.com/v-9393-46197.html or this www.toolstoday.com/v-11748-51436.html

[@n4cls1]

Is the General Finishes a water based or what??

[@amolbansode9822]

How much does this set up cost? How much is CNC machine?

[@matthewransom6469]

I need to flatten a small table I have done. I'm using a router sled not a cnc. Is the amana rc-2255 a good bit that you would recommend for that. On a router sled??

[@ToolsToday]

Yes, it will work great for a router sled!

[@matthewransom6469]

@@ToolsToday ok thank you very much for your reply. I'll be ordering one tomorrow then. Now the ToolsToday website that I can order from is that your website? I am because I'd like to order some replacement blades for it as well and figured you could direct me on that as well. If you don't mind

[@ToolsToday]

Sorry, totally missed this. Here is the replacement blades for it - www.toolstoday.com/v-13333-rck-457.html

[@papado72]

Nice video!! What is the depth of cut for the fine text?

[@ToolsToday]

Thank you! I'm not sure to be honest, it's a v-carve toolpath so it uses the dimensions of the bit and the size of the design to figure out how deep it needs to go to make it.

[@papado72]

@@ToolsToday I got it...thank you. 90 degree bit?

[@ToolsToday]

Correct

[@cncwoodcrafofficial]

cnc routar