My Vivo Y20 is using the same cpu Mtk 6765, is this method workable? Also my device is running with latest security update so will it work without test point?
Hello I've been trying to flash my phone for about 5 hours now due to it being corrupted, I've watched and read many videos and guides in order to do it and I've been able to follow along. I've downloaded the necessary files, followed the necessary procedures, yet, I'm stuck at disabling protection. I've used other mtk auth disabler applications and it would always end on > MTK Auth Disable(SLA/DAA) Error! I've been trying to figure out the cause of this error for a lengthy amount of time now and I'm completely clueless. Still, I followed your video and it ended on > Status is 7024 after I plugged in my device on windows powershell. Which was new compared to what the MTK Auth Disabler apps would end with. So, I figured that it might have something to do with why Disabling Protection would always end with an Error. Yet, I'm still very confused, hence, I wrote this comment in order to seek help from you because you might have a solution to this error. Hopefully you read this comment. (My device btw is Infinix Hot 11s)
@@hwariix I was able to factory reset my phone and was able to fix it, albeit everytime I powered it off the same issue will appear. Which I just need to reset again to avoid. Is your device also the same? If so, then I recommend spamming both the volume buttons as you hold the power button. Then you should be able to factory reset your phone through there. That's how I was able to get rid of this problem on my phone.
@@kleinmoretti1666 after factory reset did you try to flash the phone again? Because i got a bug idk if the factory reset alone can fix it or not but thx for the reply
HELP!! when I enter 'python main.py' its says 'usage: main.py [-h] -c CONFIG -p PAYLOAD main.py: error: the following arguments are required: -c/--config, -p/--payload'
Ive been trying to fix this for 4-6 hour, its 12:55AM right now. If it doesnt come out in libusb, turn the tablet on?off and if you see the update on the screen, then you got 2 secs or less to click and install the filter. Its tricky but so far so good. im currently at 6:47 of this video. hopefully it works. (lenovo E8 8304fl)
thnx bro After like 4 days strugle fainaly i fixed my phone i was having bloototh issues started when i was trying to root my set so its was fucked up but thnx for the help
@@GetDroidTips please help me,my device name is redmi note 5 pro,i can not flash my phone,error is edl authentication is required to flash. So please make video on redmi note 5 pro device.
@Get Droid Tips please help me,my device name is redmi note 5 pro,i can not flash my phone,error is edl authentication is required to flash. So please make video on redmi note 5 pro device.
[HELP] When run the script and plug the phone, it finishes wiht the following error: [Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win error: Um dispositivo ligado ao sistema n\xe3o est\xe1 a funcionar.
' [2021-11-13 12:56:17.338594] Payload did not reply
My Vivo Y20 is using the same cpu Mtk 6765, is this method workable? Also my device is running with latest security update so will it work without test point?
when ı type the command "python main.py" it gives "python is not found" error. What is the my mistake here?
Is there any hope for new mediatek proccessors like 8200 and 8100 to get new drivers?
After inputting the python main.py command
Then I got this error
RuntimeError: default config is missing.
Please What should I do 🥺
Did you solve the error???
where i can get Scratter files? i dont trust stranger file, it maybe make my phone broke even is successfully flash
Thank You very much! I have my Meizu MX 4 Pro from 2016 unbricked with your Video! THANK YOU VERRY MUCH!
Glad to hear that this video helped you. Do subscribe
@@GetDroidTips can i downgrade from android 13 to android 11 on vivo x70 pro?
Hi brother if i select auth file in sp flash tool window when flashing will it work.
First time I've come across a working tutorial, much appreciate it!
You're welcome!. Do subscribe
@@GetDroidTips Subscribed indeed :)
after command main.py show waiting for device but i connect usb device not detect ,[ ialso installed mkt driver any solution
I'm getting error found device in pre loader mode, trying to crash. Status is 7024
Really appreciate the tutorial sir,
But my PC crashes once the powershell statts disabling protection,
Stop code : WDF VIOLATION
Please advise
Bro share the command in a txt have tried typing it out but it's unrecognised
will this work on new model phone?
Where is the command for bypass utility can you create a. File please
Hello I've been trying to flash my phone for about 5 hours now due to it being corrupted, I've watched and read many videos and guides in order to do it and I've been able to follow along. I've downloaded the necessary files, followed the necessary procedures, yet, I'm stuck at disabling protection. I've used other mtk auth disabler applications and it would always end on > MTK Auth Disable(SLA/DAA) Error! I've been trying to figure out the cause of this error for a lengthy amount of time now and I'm completely clueless. Still, I followed your video and it ended on > Status is 7024 after I plugged in my device on windows powershell. Which was new compared to what the MTK Auth Disabler apps would end with. So, I figured that it might have something to do with why Disabling Protection would always end with an Error. Yet, I'm still very confused, hence, I wrote this comment in order to seek help from you because you might have a solution to this error. Hopefully you read this comment. (My device btw is Infinix Hot 11s)
Hello same problem and phone. Found any fix?
yo did you fix it I'm in the same thing now
@@hwariix I was able to factory reset my phone and was able to fix it, albeit everytime I powered it off the same issue will appear. Which I just need to reset again to avoid. Is your device also the same? If so, then I recommend spamming both the volume buttons as you hold the power button. Then you should be able to factory reset your phone through there. That's how I was able to get rid of this problem on my phone.
Yeah I didn't need to watch this video and go through all this process back then.
@@kleinmoretti1666 after factory reset did you try to flash the phone again? Because i got a bug idk if the factory reset alone can fix it or not but thx for the reply
Bro my phone is in unlocked bootloader state do i need to uncheck opporeserve 2 and cdt engineering and md5
libusb not detecting device in recovery mode. MTK DA Vcom drivers are installed .
after libusb detected and install pwershell cant detect my device. realme gt neo (china).
Wow This actually works on the Lenovo Tab 7 essentials TB-7304, which I was having problems with flashing it.
HELP!!
when I enter 'python main.py'
its says 'usage: main.py [-h] -c CONFIG -p PAYLOAD
main.py: error: the following arguments are required: -c/--config, -p/--payload'
Thanks bro
U saved the day
You are welcome. Do subscribe
@@GetDroidTips Now when i try the same command it stops at found port
thank you for tutorial, my device has turned on again, i am using MT6761
Please Help with tecno pova, error when i press download on flash tool
I'm getting da mismatch error. please help me.
this was simpler than i thought
Ive been trying to fix this for 4-6 hour, its 12:55AM right now. If it doesnt come out in libusb, turn the tablet on?off and if you see the update on the screen, then you got 2 secs or less to click and install the filter. Its tricky but so far so good. im currently at 6:47 of this video. hopefully it works. (lenovo E8 8304fl)
Glad to hear that this video helped you
wow thanks it actually works....... tbh i was worried it was trash like others
You are welcome. Do subscribe ❤️
Pls help! sp flash tool doesn't detect the com port of my device.
FIXED: Reinstalled the drivers then it got detected.
Mediatek USB Port is not showing
Hi. when I type the "pip command line" it says The Term 'pip' is not recognize
are you sure you installed python system wide? by setting environment variables
Thanks bro it worked
You are welcome. Do subscribe
thnx bro After like 4 days strugle
fainaly i fixed my phone
i was having bloototh issues started when i was trying to root my set so its was fucked up but thnx for the help
You are welcome. Do subscribe ❤️
i did actualy
Wow! You COOL! Thanks big friend
You are welcome. Do subscribe ❤️
@@GetDroidTips yes,
i am do
@@GetDroidTips please help me,my device name is redmi note 5 pro,i can not flash my phone,error is edl authentication is required to flash.
So please make video on redmi note 5 pro device.
No module named 'src.exploit'
After python main.py
Turn off windows security and reextract zip
i got payload did not reply
@Get Droid Tips please help me,my device name is redmi note 5 pro,i can not flash my phone,error is edl authentication is required to flash.
So please make video on redmi note 5 pro device.
Help me with the command again please
thanks bro its work
You are welcome. Do subscribe ❤️
infinix note 10 pro is giving me headache
ofcourse it wouldnt work....
python main.py doesnt do anything
[HELP]
When run the script and plug the phone, it finishes wiht the following error: [Errno None] b'libusb0-dll:err [control_msg] sending control message failed, win error: Um dispositivo ligado ao sistema n\xe3o est\xe1 a funcionar.
'
[2021-11-13 12:56:17.338594] Payload did not reply
Error' traceback on disabling protection
Device Realme 3
Did you install the LibUSB? we haven't updated the description yet.
@@GetDroidTips how to update?, Can i send my picture problem?
@@masbrooshid7188 yes sure
@@GetDroidTips where place i can send my picture?
Please give me Payton commond
#HowTo #android #Fix #mediatek #SPFlashTool
Help me pleeeeease
Infinix zero 30 5g zip password
ERROR: S_DA_SDMMC_WRITE_FAILED (3154)
S_COM_PORT_OPEN_FAIL (1013)
Another error. I fixed previous.