الله يعطيك الصحة و العافية و التوفيق و السداد و النجاح و الهناء الدائم إنشاءالله أستاذي العزيز ربي يحفضك و يفرحك نورتونا الله يفتح عليك أستاذي ❤❤❤❤❤❤❤❤❤❤❤
Finally someone is using proper MIG welding in Pakistan and not the ancient electric rod welding, but those cheap sunglasses provide no protection, need a proper hood.
Excellent. Good work, but ??? Why do you put back the same piece of car body that you have cutted 3 or 5 hours before ???? Small mistake. Next time use parts from other car.
Bhai ab ap mere pas car le ke ao ur Kaho ke acha se acha Kam Karke do to Bhai me kesa Kam karo saf ur acha Kam ke ata na chale ya esa Kam ke kowi bonat otaye ur dek ke bole ke kes jahil se banwa ya he Faisala ap kare Bhai
Front seat k nechay is k apnay number hotay hain aur chassis par bhi, wo to mukhtalif ho jatay hain, to aap log gari bananay k bad kheeredar ko batatay hain k ye gari kaat k banai gai hai?
This method is call " Cut and Join" - Very unsafe method, putting lives of people at great risk. No proper protective gear being used. Hopefully viewers watching this should not follow their methods of working. The welding too inadequate face protection. Perhaps he should give this car after repair to his wife to drive.
Poloo8 yes it is called cut and jon process but as you can see the guy is ding sort of trail and loose welding and it is all because they do it on purpose. First they do sort of trail welding thn they level all the panels, joints and fenders etc. Once everything is in lined than a complete run of MIG welding take place, every joint is stitched together and finally a welding expert examin the work to make sure all seams are smooth and welded together. I know the guy and he never compromise on his work.
MashaAllah ror dery zabardasty video jory
Insha Allah satado dua gano ba nora hom kha ke ge video waqat sara
X@@accidentmaster
Excellent Sir super Duper Excellent
This Level of repairing I have seen first time in Pakistan International standard
Perfect welding Jobs
Thanks
Masha'Allah behtreen kaam huwa hai ustad g
ماشاءاللہ جی
Thanks
الله يعطيك الصحة و العافية و التوفيق و السداد و النجاح و الهناء الدائم إنشاءالله أستاذي العزيز ربي يحفضك و يفرحك نورتونا الله يفتح عليك أستاذي ❤❤❤❤❤❤❤❤❤❤❤
Mashallah Good wark ❤❤❤
Excellent job 👍
Thanks
A tip:- keep your camera more steady use a gimbal if you have one or a weight attached beneath the camera helps.
Yes sir your are right inshallah after few days I purchases gimbal
Finally someone is using proper MIG welding in Pakistan and not the ancient electric rod welding, but those cheap sunglasses provide no protection, need a proper hood.
You are right my friend but Pakistani is Pakistani not care safety 🦺 gloves 🧤 🕶️ helmet ⛑️ and others
This is my mistake 😉
I would be happy if someone could correct my mistake
Will this survive if there's a crash🤔
No it won't it's scrap.
Why did the front end needed to be replaced? It did't seem to be damaged or rusted.
Replace for original work
It appeared a bit fatigued in truth, even if unrusted and straight.
Because it was in accident and doesn't repaired correctly. So they are changing front end
Zabardast ❤
Shukriya
Are you welding with out CO2 gas. If so thw weld are not strong.
Yes I welding with co2 gas
Good job ❤❤❤
Thanks
Good
Hi brother I impresse your work best of luck in future
Thank you sir
Excellent. Good work, but ??? Why do you put back the same piece of car body that you have cutted 3 or 5 hours before ???? Small mistake. Next time use parts from other car.
death trap may the family that travel in this deathtrap be safe
Miror ka covr b lga lety 😂
Very very nice
Nice video sir ye Wilding plant ketny ka ha or name kia hy is ha
Ap kaha se ho lahore Karachi dono jaga mil jata he
Sir price bata dy is plant ke
Chinese 100 k tak mil jata he 1 lac
Nice
Jhoot bol kar maal bhechna haram hay.....
Bhai ab ap mere pas car le ke ao ur Kaho ke acha se acha Kam Karke do to Bhai me kesa Kam karo saf ur acha Kam ke ata na chale ya esa Kam ke kowi bonat otaye ur dek ke bole ke kes jahil se banwa ya he Faisala ap kare Bhai
Bhai ham sab duniya ko motmain nahi karsak the
Front seat k nechay is k apnay number hotay hain aur chassis par bhi, wo to mukhtalif ho jatay hain, to aap log gari bananay k bad kheeredar ko batatay hain k ye gari kaat k banai gai hai?
Chasiss pe kaha nb hote he
@@accidentmaster jisko chassis number boltay hain
такое ошушение что эту машину как на автовазе собрали 😅
MashaALLAH ❤ ,, Zbrdst
Thanks
Excellent job kia cost aaai hai
Shukriya
Superb
Thanks
Great job AP kis city sy ho ?
Peshawar se Bhai nb mojod he video me
How many different people to weld up one car? All terrible welds too
Mashaallah
Thanks
Use guante
You have to do more preparation before any welding. In this case… it’s toasted 😂
What is the location of this workshop
In peshawar
@@accidentmaster please tell me workshop name and address
Auto master ring road opposite Suzuki motors near achini pul peshawar
Auto master ring road opposite Suzuki motors near achini pul peshawar
Location kia he ap ky
Peshawar
Nice ❤
Is gari ki mazdori kitni thi brother if you can please tell
Only dent 70 k
this car may run but cannot hold passenger safe in any collision.
Maybe you understand urdu today my new video coming
Зазоры и vin kode покинули эту машину
у нее нет вина только номер кузова и то табличка на панели а номер под водительским сиденьем а туда не лазили
Camera swinging kinda fast
Ncp cut gari
No not ncp
Dengar suara las nya kurang enak, kayak ngak sempurna.
Ham ko Pata kya he ye
Garhi he
👍
imran car poshish UA-cam channel 😢🎉😢
Masha Allah
❤😂🎉
UA-cam Ki Kmai Sy Gari ? Or Sath He Detail Interior Cleaning
ua-cam.com/video/hlerGE6orkk/v-deo.html
Location ???
Peshawar Pakistan
السلام علیکم ورحمتہ اللہ وبرکاتہ بھائی آپ کی دوکان کہاں ہے
Peshawar me nb video me mojod he
no vinnumber anymore.
جھگاڑ یہ ہمارہ قومی کھیل ہے ہمارہ ملک بھی جھگاڑ سے چل رہا ہے😅
Cooperar carro reaprando😊
This method is call " Cut and Join" - Very unsafe method, putting lives of people at great risk. No proper protective gear being used. Hopefully viewers watching this should not follow their methods of working. The welding too inadequate face protection. Perhaps he should give this car after repair to his wife to drive.
Poloo8 yes it is called cut and jon process but as you can see the guy is ding sort of trail and loose welding and it is all because they do it on purpose. First they do sort of trail welding thn they level all the panels, joints and fenders etc. Once everything is in lined than a complete run of MIG welding take place, every joint is stitched together and finally a welding expert examin the work to make sure all seams are smooth and welded together.
I know the guy and he never compromise on his work.
@polo08vw44 Go and educate yourself and while you are at it get a glasses.
Сварка не правильно настроена
Video bana sek phr Gari banana
Bhai ap seka de video banana
قرر واجد
Y
Ap ke location kdr hai
Peshawar me
Я в шоке, как плохо сделано!😅
Das ist doch scheisse .aber gute Sicherheitsschuhe
Please English
Noooooooo
Yesss
isnt that ipsum ?
неужели удобно работать в этих длинных халатах, которые постоянно вымазываются и цепляются за всё подряд? почему нельзя брюки одевать?
Your are right sir it's Pakistani dress but I am use pants 👖
After this repair better than new from Japan.
From Japan it's a good idea but maybe a cheap custom in pakistan custom very expensive
Phone number raka
Video ke shata kana rora 03129790076
Good