The originals on my 1998 GMC Suburban are longer just like your replacements. They must have started making them longer after 1995. Neither of the switches work on my front doors, so I bought the same ones as you did. Will be replacing this weekend. Thank you for the informative video! Mine has the delay where after you shut the doors, the lights stay on for about 15 seconds.
For the passenger side i used a long skinny screw driver with a hook on the end to pull the wire threw the defrost vent to unplug the switch. The old broken switch fell threw the bottom of the dash. Hope this helps!
I've been thinking about doing this and also the interior handles. The problem Im having is that when one door locks, the other will unlock and vice versa. Any idea how this could be? I thought the plugs could only go on one way!
Thanks to 1road I changed and upgraded my alternator and battery to my 95 Chevy gmc suburban I got a real surge of testicular fortitude when I turned that key 🔑 and fired my baby up Fuck yeah MURICA 🙌🏼
Literally jist had a door switch start acting up tonight. Interior light randomly coming on and going off. Smacked the exterior passenger door about where the plunger is and yup, light went out, lol. Off to the parts store tomorrow.
It's also the same as the the S10. In my 1998 S10 the passenger side works, but the driver's side doesn't. It would be nice to have the lights come on when you open the door at night or have the radio go off when you open the door, instead of having to manually turn it off.
I had a question if you got a video of the gauge of the cooling I just changed my thermostat I made sure there was no air in the cooling lines check if there's any freeze and everything seems good but my Gauge will go from One coater then to 3/4 like it Going to overheat but then goes down
He has one video which he replaced one of the temperature sensors in the truck. These GMT-400 actually have two different sensors, one for the computer and one for the gauge in the dash. If you want to see how to replace the one for the dash, I have found this video to be useful: ua-cam.com/video/MIMavV4_Ka4/v-deo.html It could also be the stepper motor in the gauge cluster. This video talks a bit about testing the gauge: ua-cam.com/video/0MZSXoCXwDQ/v-deo.html Hope that helps, not sure if Jimmy has any experience with this, or any input. But this is what I have found in my research (I also have an issue with my temp gauge)
I have a great idea for a video for anybody with a 95 to 99 Suburban because I'm stumped and I'm looking all over UA-cam to find the answer. I have a 1999 Chevy Suburban that has the Dome override and the problem I'm having after replacing my door switch is I can't get the interior light the shut off when I open the door and close it I have tried with the Dome override pushed-in also pushed out and then the rotating switch to dim your dash lights has two detent and I'm not sure what the first one is for the second one automatically turns the interior lights on. When it's on the first one or below the first one the dome light stays on constantly and does not shut off
Kevin, did you ever fix your problem? I have a similar issue with my 98 K1500, I had to remove the fuse for the interior lights because they just stayed on all the time even with the Dome Override pushed in.
Late as balls reply, but make sure you didnt roll your rheostat all the way up. Its the dial you can use to adjust your night instrument light brightness. Rotated all the way up, it turns on the interior lights.
I was so excited when I seen this video so I ordered the switch because mine was broken off on the driver side so I replaced it and I also have a new headlight switch and I still do not have a dome light when I open the door I've tried the Dome override I don't know if it's supposed to be in or out or if there is a delay after you shut the door but it either stays on permanently or doesn't come on at all when you open the door so now I'm lost
Ive has an issue with my trucks door chime, it either doesn't work but can rarely fadedly hear it and my truck doesn't have a switch like urs. How the heck can I fix it???
the switches control the ground for the light, so if there is no switch, on ground and no light. however if the switch is connected and not installed , the switch closes the connection to ground and the light stays on, ( until the battery dies).
Just did one. The proper way is to drop the panel under the steering wheel and it's right there by the parking brake release. Need a pick or flathead to unplug
Thanks for letting us know that they will break when you take them out … made removal easier and less stressful!
The originals on my 1998 GMC Suburban are longer just like your replacements. They must have started making them longer after 1995. Neither of the switches work on my front doors, so I bought the same ones as you did. Will be replacing this weekend. Thank you for the informative video! Mine has the delay where after you shut the doors, the lights stay on for about 15 seconds.
For the passenger side i used a long skinny screw driver with a hook on the end to pull the wire threw the defrost vent to unplug the switch. The old broken switch fell threw the bottom of the dash. Hope this helps!
I had not thought of going in through the fuse box to hold the plug. That will make the left side pretty easy. The right side may be difficult.
Probably too late now, but the right sides easier since the glovebox is an easy removal and gives you easy access
I've been thinking about doing this and also the interior handles. The problem Im having is that when one door locks, the other will unlock and vice versa. Any idea how this could be? I thought the plugs could only go on one way!
Thanks for posting this video, and including the correct GM part number.
What speakers and speaker mounting brackets? Curious thanks.
Thanks to 1road
I changed and upgraded my alternator and battery to my 95 Chevy gmc suburban
I got a real surge of testicular fortitude when I turned that key 🔑 and fired my baby up
Fuck yeah MURICA 🙌🏼
Have you tried doing the passenger side?
Proving that there is a UA-cam video on everything
Just bought them for my 87 V20 4x4 Diesel Burb.
Literally jist had a door switch start acting up tonight. Interior light randomly coming on and going off. Smacked the exterior passenger door about where the plunger is and yup, light went out, lol. Off to the parts store tomorrow.
What is the plastic part the switch contacts on the door panel called? I can't find a replacement anywhere.
It's also the same as the the S10.
In my 1998 S10 the passenger side works, but the driver's side doesn't. It would be nice to have the lights come on when you open the door at night or have the radio go off when you open the door, instead of having to manually turn it off.
Is this switch also what sets off the alarm when the door is opened?
How do u change it on a 88-94 obs?
What's the process on passenger door? I ask as no fuse panel there to remove.
Inwas just waiting for it to blow up when he closed the door😂😂
One of my door switches is acting up. Thanks for the video
Haha. Cool glad to help!!
its called a plunger sir , not a pin, and never cut the plunger , great video though
watch it I'm wanting to know how to remove the old one to put the new one in you already had yours out and you said you broke it pitiful
before removing the switch, spray it with electrical contact cleaner.....
I'm watching you from Saudi Arabia.i love your work😍🤗
I had a question if you got a video of the gauge of the cooling I just changed my thermostat I made sure there was no air in the cooling lines check if there's any freeze and everything seems good but my Gauge will go from One coater then to 3/4 like it Going to overheat but then goes down
He has one video which he replaced one of the temperature sensors in the truck. These GMT-400 actually have two different sensors, one for the computer and one for the gauge in the dash. If you want to see how to replace the one for the dash, I have found this video to be useful: ua-cam.com/video/MIMavV4_Ka4/v-deo.html
It could also be the stepper motor in the gauge cluster.
This video talks a bit about testing the gauge:
ua-cam.com/video/0MZSXoCXwDQ/v-deo.html
Hope that helps, not sure if Jimmy has any experience with this, or any input. But this is what I have found in my research (I also have an issue with my temp gauge)
Replaced mine and for some reason the light continues to stay on even with the doors closed any idea why ?
Thank you my friend
I have a great idea for a video for anybody with a 95 to 99 Suburban because I'm stumped and I'm looking all over UA-cam to find the answer. I have a 1999 Chevy Suburban that has the Dome override and the problem I'm having after replacing my door switch is I can't get the interior light the shut off when I open the door and close it I have tried with the Dome override pushed-in also pushed out and then the rotating switch to dim your dash lights has two detent and I'm not sure what the first one is for the second one automatically turns the interior lights on. When it's on the first one or below the first one the dome light stays on constantly and does not shut off
Kevin, did you ever fix your problem? I have a similar issue with my 98 K1500, I had to remove the fuse for the interior lights because they just stayed on all the time even with the Dome Override pushed in.
Late as balls reply, but make sure you didnt roll your rheostat all the way up. Its the dial you can use to adjust your night instrument light brightness. Rotated all the way up, it turns on the interior lights.
I was so excited when I seen this video so I ordered the switch because mine was broken off on the driver side so I replaced it and I also have a new headlight switch and I still do not have a dome light when I open the door I've tried the Dome override I don't know if it's supposed to be in or out or if there is a delay after you shut the door but it either stays on permanently or doesn't come on at all when you open the door so now I'm lost
Hi i replaced my switch and now have another problem dome light comes on by itself not sure why
Probably a bad wire or bad ground. Get the DVOM out and start at the switch terminal. Also search YT.
Thanks for the video
My 94 doesn't have the fuse door to access switch with the 90 degree pliers.
Hi m8 interior light on my 97suburban stays on and drain battery power any ideas? Thanks
Check the switches shown in this video.
My '98 doesn't have those lights. I want those lights. Gonna have to check this out.
Good video
Truthfully, take the 5 extra minute's and take off your cluster bezel, wiring is right there.
can you show where the passengers door jam switch go I think mine is gone
Does this control the door panel light as well ? 95
Do I have to go thru the dash
The 88-94 models are a but harder to get out
Any one knows what fues controls them they were working fine and I change my head light switch and now there not
Mine literally fell out.. will this drain the battery?
Thank you!
Just bought a 94 Silverado and both sides are missing and I can’t find the wires. There are just holes where they used to be. Weird.
Shouldn’t the light stay on for like 30 seconds after the switch is depressed?
Same for a 94 I assume?
What about for a 2001?
Ive has an issue with my trucks door chime, it either doesn't work but can rarely fadedly hear it and my truck doesn't have a switch like urs. How the heck can I fix it???
The unit is under the dash and easy to find. You can unplug it and leave it that way or replace it fairly cheaply if you prefer the sound.
My light on turns on and off with my ignition is on,why?
Is there a video on how to fix your gauge cluster in that year model 1996 to 1998
There are shops online that specialize in that repair and many YT videos about it too!
How do I get a 1Road banner? 😁
I have 1995 Chevy c1500 I went to auto zone and both parts they gave me don't match up can someone please help me ty
RockAuto.
Lolzzzz holding connector with plyer
ughhh it didnt work for me
What happens if I keep the part out completely. Will that drain battery?
No. Mine has been broken for a while.. you just have to manual turn on the lights
the switches control the ground for the light, so if there is no switch, on ground and no light. however if the switch is connected and not installed , the switch closes the connection to ground and the light stays on, ( until the battery dies).
First to watch this video
This is not for a 99
Pretty useless video if you ask me. You need to show your full process. Show how you take the old switch out and how you disconnected the switch.
Just did one. The proper way is to drop the panel under the steering wheel and it's right there by the parking brake release. Need a pick or flathead to unplug