Cold Wire Feed TIG Welding
Вставка
- Опубліковано 2 лип 2020
- We paired up our Everlast PowerTIG 210 EXT with an Abicor Binzel Cold Wire Feed TIG system and a Bug-O track system. We're going to show you how we swapped the amphenol plug to match the Everlast Power TIG 210EXT and how we built a separate gas line. After we get it a ll setup we run some different beads. First we start out with straight amperage and straight wire feed. Then we pulse the amps with a straight wire feed and finally we try to match the pulse on the wire feed to watch the pulse on the amps.
Ready to join the WELDing community? Download the WELD™ app in the Google or Apple stores or Log in online at www.weld.com today! Find welding resources and exclusive or refurbished videos with details to help you get the most out of your learning. Ask questions and let our advisors and community help you out! Check out awesome member discounts through our brand partners and enter to win monthly mystery boxes, listen in on our podcasts and follow our social channels: linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
I use to run a dabber tig machine for doing repairs on aircraft air seals parts for an aerospace company. Very nice!
Glad you’re doing this cause I’ve got this exact welder and you’ve done all the hard stuff!
Great video ! I really enjoyed watching that thing weld. I used to run a tig welder like that making sink bowls for restaurant equipment.
Thanks for watching
No need to rob the plug from an Everlast torch, if you search for CB microphone plugs in E bay or Amazon you will find those plugs in many pin configurations,just find six pins ones. They go from two to eight pins. And are very cheap costing just a dollar or two.
I love this channel so much. What I learn here, I can't be grateful enough. I just can't.
30yrs ago I remember using 3 phase machines like this to weld whole 1" thick plates to make giant pieces for ship building, nice video.
Would've liked to see that. Thanks for watching.
sub arc
MIG + TIG AMAZING !!!
The end of the good welders
Very interesting ..... I am in the middle of making a cold wire feed from scratch and looking at features on industrial machines . I see some machines can sense the welding current pulses and use that to trigger the wire feeder drive :-). So no messing about trying to sync feeder and Tig pulses. Sadly syncing by hand will never be an easy option.....It was great to see the CLASS arc shots and this will help me alot.Thanks from Ballynahinch
Thanks for watching weld.com
@@mancubwelder7924 THANK YOU
In Europe already exist this idea :D
Nice job man! The arc footage is incredible! Very clear.
We're using a Xiris Weld Camera
I have the R-Tech version of the 260 amp welder, it's a pretty nice welder but a little costly, but I love it still
I felt like Jesse from fast and furious was narrating this lol. Badass setup 👍
Your projects are awesome,as always!)
I do cold feed welding with my TIG almost every day at my job. I use a Miller TIG and the MIG wire feeder from my Miller MiG welder for the cold wire feed. I disconnect the power to the MiG gun when cold feeding and I have to run it very slow for what I do. Like 0.5 speed on the dial. I do it all by hand, TIG in right hand Tweco MiG gun in my left.
Thinking outside the box! I like it. Oh, and nice work CameraGuy.
Thanks for watching
Soo. You created a Mig pulse welder. Well done!
Changing tools for working better❤
Glad to see your welding skills are better than your soldering :)
Nice work Mancub!
0:00-0:04 Who knew they made reciprocating weld wire!! Amazing!! ;-)
Another great vid!!
I love this video. I got zero use for this. but the arc shots, nerd shit, macgyver rigging, and filming and explanation in general made a great watch.
Arc machines inc in California has this already. It’s not cheap. You can use it for orbital heads or on a track system. I used a wire feed orbital head back in 2007.
I have a Tip Tig i use at work all the time hooked up to a miller dynasty.. it’s an amazing set up saves a lot of time and runs beautiful beads.. what’s different about the Tip Tig it has a hot wire and the wire Reciprocates it mimics dipping the wire in the puddle.
I am impressed, all this guy's saying stuff it's cause their not having fun welding, Welding is life, great vedio
How long you been welding
I absolutely love "first thing first thing" LOL Adorable! I like the "opening" of the drawer shots as well. ;-) It keeps me coming back! LOL
Great welding footage Mancub!
Thanks Dudley. Thanks for watching Weld.com. Stay healthy and safe
Hey! I'm new here and I love these kind of videos, I enjoyed this one a lot.
Also, I hope you're doing just fine because by the way you're talking it felt like you are going to pass out. ✌️
For whatever it's worth, I have been told to aim the wire to the edge of the puddle and possibly even sliding it in along the "cold" metal. If you do drops, you would need to pulse the wire in sync with the arc pulsing. A little shorter arc would reduce the voltage, power (heating) and puddle width. At the same time it should become easier to stop the drop forming. All this is hearsay, but has so far seemed to make sense to me.
I could use that on my rollout wheel for pipe right there wow.
Nice camera angles!
wow.. definitely learned some stuff today!
Friggin cool project !!!!!
Thank you TechGuy. Thanks for watching Weld.com. Stay healthy and be safe
Awesome bro.. I used this method. Thanxs for good video.
Great idea!
Awesome you will find the sweet spot ...just a couple more tweeks .
SO close. We'll get tit there
Too rad dude!
super się ciebie ogląda pozdrawiam ;)
Great vid, have learnt lots on Weld tube keep up the good work...much love from zim 🇿🇼
This is weld.com not weld tube lol
@@FriedEggsandJellyfish Hey, we love the guys from Weldtube too
@@Welddotcom no doubt brother 👍
My bad I got it mixed up but yeah great stuff all the way
good welding machine, so that it can simplify the welding process
My man soldering on top of the manual lol.
Muy buena imagen del arco de plasma gracias.
Very good! ...
turn the torch 120º / 135º in relation to the wire will improve even more :-)
Quite captivating.
The guy weldering in the video has really steady hand and superb hand eye coordination
It's a machine
@@armenvegas oh ic :(
Hi, great video and very educational. Two questions though. What type of mig wire you used, Flux Core or Solid. And what size if Mig wire is that.
The next step Orbital 👏
Good job friend
@weld.com lookup "lineman's splice". It's a much more secure way to solder those wires together. It's also the same general method that NASA approved for splicing wires in space flight.
Nobody in their right mind splices that’s way
Great video dude
Thanks for watching brother
Looks Good, Too bad, it was not around when I was doing repairs and fabrication tig welds for Naval Aviation and ground support equipment repairs. We used the good old manual Miller and Lincon welding outfits, the square wave had just come on the scene and we thought it was the equivalent of driving and automatic versus a Stick. Lol
Here’s a soldering trick. Load the solder onto your wires before trying to solder them together.
Agree, called tinning. Soldering isn't hard but there is a right way.
True. This soldering was horrible.
First he should remove a oxides by knife, then put a flux, little bit solder for both wires and finally join together.
@@kdstechnika The solder wire contains flux, if the wires are clean then no strict need for adding flux. If the wires are not decades old, probably won't need sanding or scraping either. The ones in the video seem clean. Just tin the ends, both, then solder them together. Alwas add new solder while soldering, do not just reflow the material already there. Do not add excess solder in the tinning step that makes balls on the wire, just enough to cover the strands, so you can add much more while soldering together.
The reason for needing fresh solder is that the flux already burnt out during tinning, and does not prevent oxidation any more. Reflowing will make a porous and weak joint. Adding fresh solder into the pool prevents oxidation and makes a shiny joint. Think it as shielding gas. Do not elongate the process because the same happens. When both metals reached the working temperature and the solder is molten and seems flown around them, stop feeding the solder then abruptly remove heating. And keep the pieces from moving until it is solid, of course.
I can solder everything to everything, but of course suck at welding. 😉
Consider bringing in a nerd to help you out. Your camera work is sufficient for a computer vision system. It could see the thing you were calling out in real time and it could make the adjustments in real time. Of course the computer would need to be able to change the gas flow, the welder settings, the tip height and travel speed, as well as adjust the wire feed and angle. I might have left a few things out, and it's not really difficult to do those things. An infrared camera would give you complete control your heat as well.
First time viewer. Your voice sounds like Jesse's on the fast and furious.
This very great
put 5 deg lead angle in your torch head and change your entry angle on your wire to a little more of a steeper entry and have it come into the front of the puddle. this will alleviate having to increase your wire speed and reduce wire drip.
Can you do the same by holding the TIG torch in one hand and holding the MIG torch (without ground) in you other hand?
Awesome
Very interesting video
That's cool, Automated tig. This means my tungsten grinder won't get any use !!!😆😆😆
His still got it dirty though. I was wondering why he didnt raise it up a little at the end.
Man i do tip-tig and trust me you'll be grinding your tungsten more often)))
And your main hand will get stronger, and your GF will be like "what you do for a livin' again?"
Good job mancub
Thanks Randy. Thanks for watching weld.com. Take it easy
extraordinary👍👍
Good job, you made a mig welder with more steps.
Looking a little disheveled there. You been working?
LOL. Keep up the work up buddy!
Needed add push-pull function
You are having issues because the wire is not retracting from the weld pool so that’s why you’re getting the bubble effect. The actual machines designed for this purpose feed and retract the wire. Some pulse feed the wire you could modify the roller to obtain that effect.
You can use 6 pole XLR connectors, they are cheaper and robust. 👍
Maybe a hose clamp instead or twisting wire for a seal on that gas line
Я в tig сварке полный 0. Но электрод грязный. С наростами. Результат может быть лучше будет если его наточить и отшлифовать?
Нормальный электрод, это они так обгорают после долгого использования. Сопли не висят, норм.
Nice lovely
You know it’ll help a lot if you had a work bench that doesn’t have holes in it. You’ll lose less screws that way.
It looked like soldering was more difficult than welding ;)
A pulse arc spray transfer mig would be more efficient and faster I think. It is like reinventing the wheel.
Cool
Need to angle the torch back a bit not just straight down this allows the metal moving forward to heat up.
Theirs a kind of welding call cladding that uses the same method as this.
Didnt know that.Thats cool. Thank you for watching weld.com. Stay healthy and safe
i used to do cladding. 18 ga stainless steel over 2" mild steel core for large plate heat exchangers.. laser cut sheetmetal is bent to fit tightly over the core. it can be done by hand, without any automatic wirefeed.
Would be cool if there was a way to integrate this into a one handheld gun. 🙄
you should try to attach this to your cnc plasma and draw things
Hello 👋 but i would use a blunted tungsten (0,2 mm). then you dont have that "christmas tree" 😉 and longer service life.
Thanks for the demonstration. What wire stripper were you using? Do you recommend it?
Question: why use 3/32 tungsten when your at 175a, then moved up to 209a... little hot for 3/32, ya think? Looked like either contamination or deterioration on the tip of the tungsten. And i didnt hear what size wire he was feeding into the puddle, could you elaborate. I personally would have chosen a 1/8 tung, #8 cup with a gas lens. Also, i always have a travel angle on my torch, not much, but a little...
i agree. probably to hot, and the tungsten isn't getting cooled enough. it looks to me like the tungsten is building up dendrites. it also could be a bad quality gas, or just a bad gas coverage.
We probably should've upped the tungsten size and wire to help the balling. We only had a 5 cup for this torch as it's a special cup. The wire was 035.
👍👍👍👍👍😎
soon no one people have a work, all workers is robot,
GOOD! I FROM VIENAM..
As you can tell from the question I'm about to ask I am not a welder. What would this setup be used for?
I've been welding in the oil industry my whole life and I can't even tell you why this would be used
I used to use twist pliers and safety wire for the occasional small hose clamp application. It never clamped all that well or I'd break the safety wire.
Then, saw this rather clever DIY version of the ClampTite tool. I've since used longer all-thread with a large hex nut welded on the end. I've replaced around three dozen worm-gear hose claps with safety wire versions. The safety wire versions are smoother, don't catch on anything, and best all, don't take chunks of flesh out of my hands.
Check it out:
ua-cam.com/video/5w1_9IkeRmQ/v-deo.html
Классно удобно
My man is working hard to put himself out of a job. The average worker who invented something amazing that makes millions always get best out of his invention and for all his hard work finds himself in the unemployment line.
Where do I get one them automatic tug wire fee?
This one is from Abicor Binzel
Tôi muốn mua 1 máy như của bạn
bạn có thể gửi link sản phẩm cho tôi không ?
SO after much rooting around , you made a MIG ,, he he he
Looks like a tip tig
😲😲😲😲😀😀😀👍👍👍👍
Skip to 9:30
Naice
Great video, but I should go to the Local Community College to learn everything at a "SLOWER RATE"!
Thanks for sharing this video.👍
Take care,
🤓 -Thomas
Port Orchard, WA
(Just West of Seattle, Washington)
Dweeb
Could you have made adapters for everything so you wouldn't have to hack all the machines up
I was thinking the same thing. A little forethought and some planning would have been nice instead of hacking things up to make it work.
Hanzhen harmonic drive gear , robot joint gear reducer, , over 30 years experience
Suy cho cùng những hằng làm biếng toàn những hằng thông minh
How bend test