How To Save Electricity Bill at home | How To Reduce Electricity Bill | How To Reduce Current Bill
Вставка
- Опубліковано 20 сер 2024
- #technical #electric #save #electronic #electrical #current #voltage #power #pf #viral #trend @madinodi @destinytechinkannada Ask your questions or answer others quesion on ansfind.com
Find best mobile prices at pricefind.in
How To Save Electricity Bill at home | How To Reduce Electricity Bill | How To Reduce Current Bill
How to save electricity at home | how to save electricity current bill at home | Hack Energy Meter
this video help about how to save electricity at home using as per load capacitor at home
buy meter :- amzn.to/36tuIbU
buy energy meter :- amzn.to/2N0bJhh
buy MCB :-amzn.to/37CsIyb
buy capacitor :-amzn.to/37J8umx
buy capacitor :-amzn.to/2ufgcWT save electricity bill save electricity home - Навчання та стиль
This process of connecting capacitor (formerly called condenser) in parallel across the load is called Power factor correction. This is done to correct the power factor of your inductive load towards unity (ie 1 {one} ). It is an attempt to remove the reactive part of your load current and leaving only that active current. By doing so in Electrical Engineering cct theory, we say the load is 'purely resistive' at unity power factor. The value of the capacitor to be use to correct the power factor towards unity (1) depends in how inductive the load is. It's is an attempt to cancel out the inductive current which is in effect will be lagging the voltage (or trailing behind) when the current-voltage graph against time is plotted in a graph. Note that when the two vector quantities (with magnitude and direction) are in phase or are neither leading nor lagging each others, tbe load is said to be purely resistive and wasted energy in form of reactive power is done away with. Hence the power is rated in Watts and otherwise, it will be rated in VA which is a product (multiplication) of both voltage and the used current that will be the real and the wasted in the later case. Don't thank me. Thank Electrical circuit theory that taught us this relatively very, very simple theory amid other extremely complex theories which we have learnt and teach to our students up to Phd level.
Doğrudur.👍
Thanks for the explanation Debola...
👍
Great Analysis... But will that be a exact solution to bring down the bill?
So.......
........ Should we do this or not...
Only way to save is to turn the main switch off! Then install solar power and battery bank
Actually we can assemble solar cell.
Solar free kya,???????????????????
For power factor correction, you need to know whether your angle is leading or lagging. You cannot blind insert a capacitor and hope the God will save your energy bulls.
22 F is imposible. The Earth is 1 F. The PFC must be 1, balanced for capacitance, inductance, resistance means that info is not correctly.
Good
Technique might be helpful when you run Inductive Equipments like motors etc.. , adding capacitor makes the Voltage and Current graph 📈 similar to one another and prevent current from lagging of the voltage, hence it can save 1-4 units hardly.
Ppll e.
Excuse me, can you help me!? How I can now the size of capacitor needed for the certain circuit or calculation.
@@mfaumesuya7980 not very easy. Inductive load usually are electric motor. And the phase error should be not more of 0.8 cosene. But, there is a but. The phase error is not stable, it depends also from the mechanic load of the motor.
There is no way to calculate time by time the phase error. But, on big installations there is an electronic box that has inside of it a three phase detector. Is a cmos CD4046. this IC together with step-down transformers will detect current error phase in rispect to voltage and a microprocessor will add or subtract capacitor on to the line in binary logic. In this way error phase is correct immidiatly in respect to the load. Other ways today a switching mode power supply or PWM power unit are used but electric motors are totally different in rispect to traditional motor. They are a three phase step motor (that how they are called) nowadays air conditioner, fridge, washing machine etc. are using this type of technology and they are called energy save.
If you want to save money on electrical bill just unplug TV, DVD, hi fi, and all electrical home use staff when you don't use them.
Think that a TV in standby drows about 2 watt hour. In 24 hours are 48wh. Time that for each TV at home, time that for eac dvd reader, time that for each computer connected at home and at the end you time that fo 365 day in a year and you will See how many kwh you pay without using them.
Good luck.
Per day 1-4 units or per month??
Yes, it's call power factor correction. But it will work only if you have many inductive loads in your home, mean such as motors, tube lights transformers etc. Not for heaters hotplates like resistive loads.
750 ,to 250 impossible , as there are fixed charges from rs 50 to 150.
Max 5 percent of variable cost may reduce.
It is better to use cap at induction load instead of supply...
@@tharunetikikota7442 how abt a 40kohms resistor on the neutral to reduce back current flow, hope to remove 6 amps back flow...... any advice any untoward reason it shd not b used
Connecting capacitor across the load improves power factor which is profitable to supply companies ,not to consumers if there is no bonus on improvement of pf
Great Powerful idea
House bills are calculated in KWH not in KVAH so no saving effect of this on your bill.It might increase due to resistive load of capacitor.
🤣 by the way what is the difference between KWH and KVAH?
@@nikamabhijeet KWH is kilowatt hour and KVAH is kilo volt ampere hour. For house bills kwh is considered and for industrial bills kvah is used. For KVAH calculations power factor is considered which can be 1 or less.Kwah can be equal or more than kwh.
True
@@nikamabhijeet kVAH. Is voltage * current* 1000* time in hour while kw is kvah*cos(phi)
KVAH is apparent power while kw is actual power considering the phase lag Or lead. For resistance loads (phi) is zero and cos(phi) is one...
Capacitor is used for correction of powerfactor to unity or nearby...
In India current is measured in kw and not kva so adding a capacitor will only increase the current bill.
@@MrCool-vi9wh lol. w=VA
Capacitor value / voltage not mentioned. What is the use of this demonstrations? 🤔
May use 2.2 mfd to 6 mfd to each inductive load, in parallel note if capacitor gets short circuit, fuses will be blown. I don't think it saves power
Has anyone watched this video and tried it?
Phir BEST wala aayega aur capacitor ke saath electricity bhi kaat ke jayega
Đ
Nuts.
Capacitors only generate or compensate reactive power, VAr. A kWh meter only recogizes active power, Watts.
Regards.
Eugene Pohjola, this video is made only for the benefit of the uploader to get views and make money
@@eltonpereira875 Howdy.
Aha OK. That explains a lot.
Regards.
Can teach ys to reduce electric current used if a Air - con on the house and refregirator & electric fan..and how much the assessories..
Switch to BLDC fans , use windows with net instead of ac at night .
Ùý6yýý
Lljjljljljjjjlljljjjljjjljjjljjljjlljljljjjljljjjjjljjljjllljlljlljlllllljlljjlljljljllljljjlklljjljllljjlljlljljjljlljljljljjlllllljljjljllljlljljllljljjjllljlljjljjjlljjljljjlljlllj 🙏lljjljjjljjljljljllljljlljllllljljljlljjlljklljjlljlllljljljljlljlljlllljljljkljlljllljlllljlljljjllljljljlkklllllljljljljjllljljljllllljllljljlllllllljllljlljljlljllllljljll
Simple switch off it or ,😏 throw out from house
Capacitor increase power factor and reduces the current but the overall consumption remains same hence this is useless💥🧤
Bull shit
Really, how
No power seavig no reduce light bill.
.
Please don't play with electricity.It is always dangerous.
Correct ga chepav🤗
Congratulation
Only poor power factor may increase. But bill of Rs 750 will not reduce to Rs 250. As there are some fixed charges.
Brother forget about electricity bill, if electricity department came to know (since it is unsafe), they will file a case against you, and also power supply will be disconnect to the residents, please don't do this.
The capacity will influence ( compensate) only reactive energy of the loads.
No influences on resistances of the loads ( active power).
Conclusions:
No economy on electric heating with resistances. Main domestic consumers.
Pls don’t do like this very dangerous without any control circuit
Don't do this in your home
Don't use any capacitor our house load is capacitive inductive and resistive that is balanced PF is nearly 1 capacitor is connected if there is only inductive load and PF gets less than 1 , simply connecting will increase electric bill
Nobody should attempt to set this, if you get caught somehow, the supply company can initiate a heavy legal action against you.
No you are wrong. Technically this is been encouraged by electric company. This system makes electric company and the end consumer to get higher efficiency. This improves POWER FACTOR.
@@rishibharadvaaj5485 Can you mention the name of such electric supply company who encourage to do this type of illegal activities.
In my state the electric supply company by name CESC (Calcutta Electric Supply Corporation) has initiated ample legal action against the consumers those who attempted to apply this trick and was caught by the Special Task Force team of West Bengal State Electric Board.
@@JM-lg2go
I don't know about the (CESC), but in Karnataka this is not illegal. I've been told by our lectures when I was in the college and even told by the senior engineers when I was working in an Aeronautical company's substation.
@@rishibharadvaaj5485 Do you know what is written Under SECTION 138, Clause (d) & SECTION 151(B) of Electricity Act, 2003. Try to find it and read it clearly, that will help you to update your knowledge about this thing and the legal punishment mentioned under this section if any consumer tampers or alter the reading of the meter placed by the supply company to record monthly consumption of the consumer for Billing.
@@JM-lg2go
By this I'm sure that you are neither an electric engineer nor an elec.technician isn't it. This not tampering of meters by any means. This is technically called improvement of power factor in any equipment which includes coil windings such as motor, fan etc... This is applicable only to AC current not for DC current. In the winding there is a phenomenon called inductance, in which induced EMF (Electro Magnetic Force) produces reverse current which resists the incoming current this is called "LAGGING OF CURRENT WRT VOLTAGE" and reduces the efficiency of the equipments. This is measured in the scale of 0 ,0.1, 0.2..... upto 1. 0 means lowest performance 1 is max efficiency. When capacitor is connected parallel to the supply it maximize the current at incoming to overcome the resistance which is called " LEADING OF CURRENT WRT VOLTAGE". I think your are now convinced. If not, then you can check the other comments in this video or search for term "POWER FACTOR"
Sir, actually I used 240 kW per month power supply, so how value used capacitor means which kW capacitor used sir, plz help me discrz my current bill sir plz plz tell me
5 micro farad, 400 volt. BUT do not count on it to reduce cost. test it. it might. needs accurate calculation and measurement.
Thank u sir
Watch less TV programmes, never use aircon. 100% save you money. Capacitor is bullshit.
dont try this it will not work on heating and , lighting load the fellow who uploaded is non technical fellow.
Go solar
L singh....5kwh k load par kitne value ka capacitor lagega???
5 kvar
There is no difference in power usage, still the same in power consumption!
I think he is doing some magic 😜
@@lokeshwaran.03 Yep! Modern tech magic just by a press of a button amazing things happens.
What’s the size of the capacitor?
55 uf
55microfarrad?
If iwanto conet the the capacitor please iwe let you know thank sir
My house lo 140 units use chestamu entha microfared capacitor vadali
Home lo motors untene .. capacitors use avutay orelse no use...
Theariotically it will not serve any purpose and help to reduce power consumption, for the following reasons. 1. The function of a capacitor is to charge it self full and store the current and to release the voltage in to the circuit if any downs are there in power supply, thereby maintaining the power supply steadily. How this will help reduction in power consumption? 2) One should understand that for any fluctuations in power supply, the power meters will not run speedily mad on its own. At the most the capacitor will help for the steady supply of power by charge and discharge. That's all.
Your understanding the usage of capacitor in DC circuit is absolute, but likewise capacitor it makes the current leading in an AC circuit. So while residential customers has almost and always has an inductive load like every appliance which has a coil that makes the current lagging from the induced voltage then you are paying the cost of the apparent power instead of just simply be the real power since we are in AC circuit. In an AC circuit we have a power triangle. Apparent power is a vectorial sum of the real power and the reactive power, hence you have inductive load and aiming to pay only real power which you are likewise only using you have to make the voltage and the current be in phase or in unity that is then the use capacitor.
@@Ukruins Good analysis. Please also explain what would be the impact on the power meter reading, ie. apparent powe consumption and actual power consumption? Will there be any savings at all by using the capacitor as above?
@@GKVVx If the AC circuit given is inductive load as what we have stated above then you are correcting your power factor from lagging to unity by including capacitor in the circuit, that this would comes out that your apparent power be equal to the real power and or your outcome circuit would be purely resistive and the inductive reactive power would likewise eliminated then eventually you are only paying now the real power consumed in a particular time and you would be paying less, but need not to put capacitor in a purely resistive load and or else you would be paying more since you are from unity to capacitive load. To determine your present load you can use Flukes multi-meter this would register the power factor angle and eventually determined the current either be leading or lagging in a particular angle and that’s only then to clearly know the capacitance of capacitor to use to at least comes near to a unity if known that the current is lagging or the circuit is inductive.
@@Ukruins sir can iask a question ❓❓ is it true that installing capacitor help to lower our electrical consumption???
Only problem is that your electricity bill will remain unchanged. That domestic Energy meter records True Power (kW) not Apparent Power (VA) so you are not being charged for power factor correction. So in theory it may work but it's totally useless to save on electricity bills.
I saw related video he said all about this bill is coming same not change only pf change but pf will High and current amps will reduce but no use
అదంతా బిగ్ ఇచ్చావ్ బానే ఉంది దాని వల్ల ఏంటి ఉపయోగం acchi ఆన్ చేసి అది ఏమైంది వీడియో చేసి పెడితే దాని వల్ల మంచి జరుగుతుందా చెడు జరుగుతుంది స్విచ్ ఆన్ చేసి ఏ వైద్య వీడియో పెడితే హరి చూసి పనికిమాలిన వీడియోలు పెడితే ఏం లాభం
Telugu aurttham kaadhemoley bro vaadiki
Let say your using 230v what is the required microfarad for capacitor to be installed?
Capacitors have morethan thousands types of values , you didn't show the value of the capacitor .
I have made it years before. But not applicable in home, residential field. Nothing will improved. Waste of money. Suit only if you have inductive load.
correct, useless for home, rather it is a fire hazard
the capacitor becomes extremely hot after one hour
and may explode
Basically this improves the power factor to max. Because of inductance current lags behind the voltage, so to counter the lagging, capacitor is added parallelly. But this doesn't work on heaters, geysers Or any other electronic equipment or heating coils.
Nagdemo ka hnd mo cnabi kung anong klase capacitor kung ilan watt o ilan ang voltage
The key to use is,--- run capacitor. The start cap, is a incorrect choice.
How many uf for run capacitor...
Electricity meter measures real power and not KVA. Therefore power factor correction saves you nothing. Its just a benefit for the electric utility.
This is a waste of our time and its a pity UA-cam does not show dislikes.
Also tell how to get out of jail after doing this.
do it inside home line
😂😂😂
Capacitor bank is recommended by government. Not illegal. For ht lode government do not accept connection without CAPACITOR BANK for power factor standards.
But this is fake video
Wheter a normal capacitor like the one which we use for fans will work?
The size of capacitor should depend on load ! IT is better to fix for motors according its kw.
I don't understand
Capacitors already inbuilt with motors ..so dont need to connect
Sir .what is the size of the capacitor to be installed.
Use AC(AlternatingCurrent) capacitors....oil filled capacitors..all these I have been using...but be careful while disconnecting they will be charged....keep away from children...
It will not work in reducing domestic Electricity bill. Because domestic Electricity bill calculated only KWH. No role of power factor and increasing power factor KW can not be controlled.
A sure way to lower your electricity bill is to put a magnet next to your meter. Place a speaker magnet on top of you pannel above the meter and watch it slow down by half or more instantly. Don't tell them I told you.
😁😁 I agree
Dies it work?
It is illegal.
He he he the magnet only slows down the revolution of the disk so with the flow of current but the power consumption is still the same, like the water faucet you can control the flow but the volume of water consumed is still the same.
What kind of capacitor do u use..
If we using huge inductive load this method will helps to improve power factor for domestic application this is not help to reduce the electrical charge
Sorry I have a question can I know is it legal or ... to use like this to reduce power bill
are you tampering with the electric supply meter & mcb fitted together- this is illegal!
Its not commected on meter side so its not illegal
The connection outside of the meter is in the control of the consumer.
Capacitor 15uF CBB60 AC 450V w 2 Lead Wires
It is only use to... improve power factor.By way of improving PF...by adding capacitance load may reduce consumption...very..very minimum only...
We are using mostly inductive load only...by adding capacitance load can compensate lagging PF and reduce the current..that is ampere.
Capacitor description/specifications please
55 uf
What is the value of the capacitor condenser?
A
nswer
55 uf
Now a days all meters are digitally operating this trick is only for induction type energy meters
Well said sir
I'm confused and many questions and doubts is created
we are receiving voltage less than 180, is this control our voltage fluctuations?
USE VOLTAGE STEBILISER IF APPROPRIATE CAPACITY
Capacitor 55uf
what is the value of capasitor
Capacitor values full details...
still we have chootyas...keep it up
How much mfd capacitor should be attached with 5 kw load in single phase meter
ELECTROPRIME a12070900ux0256 Single Phase Motor Running Capacitor 15uF CBB60 AC 450V w 2 Lead Wires
Whats is the polarity or the connection. Is it the possitive sign of the capacitor connect it to the live line or to the ground line ?
Is this use for categery 2 meters
What is the rating of capacitor.
You can use 10 mfd to 100 mfd,
If you want to waste money and time, go ahead. Use anywhere from 1uf to 50 uf but make sure it is rated at 250V AC and above. To protect yourself connect 1M ohm half watt resistor across the capacitor. You would learn a good lession after spending a couple of $.
@@williamwong5627 0
Non-sense! The capacitor only takes a leading current and reduces the KVA rating of the line! The Kw or the energy drawn remains the same!
Save your bill only by using Less electricity
How to calculate the capacity of the capacitor with that of the connected load of the electricity to the house
No
If we detached fuse for.a second is it a offense
What is the condenser range please explain. Thanks
ELECTROPRIME a12070900ux0256 Single Phase Motor Running Capacitor 15uF CBB60 AC 450V w 2 Lead Wires
Is it allowed by the Electricity Board ?
To lower your bills, reduce your load.
I wrote my Thesis on this subject back in 1988 **saving power by correcting your POWER FACTOR AND CLEAN UP YOUR POWER LINES TO SAVE POWER COST*****DR KEL
Capacitor value ?
This is cannot help,when a meter reader knows this!!!you will find for tampering their meter!!!!😛😛😛😛😛
It's very uesful
its all ok but what is capacity of capacitor?
If your aplliances is electronic.it is allowed to use capacitor
The only way to save money wire into the nearest lampost
What is capacitor value
This is Baloney Sausage , the electric meter records only watts consumed , the capacitor does nothing ! Total B.S..!
Legal prasnam undavumennu comments und pakshe no way avarude meterinu munpo meterilo enthenkilum cheythal mathrame action edukkan pattu ithippo parellal connectionaa ethenkilum three pin socketil connect cheythalum mathi fluctuation kurakkuka ennu mathrame ithukonduddesikkunnullu ithippo oru tv yude smpsil inputil connect cheythu tv kuthiyittirunnalum ithe connection thanne smps boardil enthu modification varutharuthennu parayan kseb kku pattilla short circuit aannenkil fuse pinnenthina error reading kurakkam ennanenikku thonnunnath
Is it allowed in Meralco? Is it legal also....
I think its voltage filter your use if not ruining capacitor
Go for oil lamp peace of mind. Throw all digital ..have good sleep
How many mfd cap used?
Hello bro
Thanks a lot for this interesting information
Can it apply for Indian's law
It is useful only for inductive load, thts very minimal in households. Resistive current cant be compensated.
Great point
THAT IS ILLEGAL IN OUR COUNTRY. ONE COULD BE PUT TO PRISON!
After watching this electric department wants to know your location 😂😂😂
😛
No, fire department wants to know his location.
Which copceter use
எத்தனைmfd தேவை விவரம் தெரியபடுத்தவும்
It is of no use in house where there is no inductive load as it is there in any industry..!!
Show the below cable clearly what this . different types of cable y u have to use .u r short that cable with MCB r not .
Load 1hp aircon and flat iron. Measure the RPM of the kilowatt-hour meter disc or timed the disc rotation within 2 minutes. Be sure thermostat is not tripping. Record and compare the rpm of the disc, if it is reduced when
you plug the capacitor, it reduced your consumption. do not be tricked when the dealer demonstrate using a clamp-meter that shows a reduced line current, because the power factor is improved. consider power = voltage x current x power factor. If the power factor is improved, the current is reduced while power remains constant. the only benefit of this capacitor is that it increases the a paucity rating of your conductor. For information....
what is the value of the capacitor?
$1.50😂😂😂
India
1 farad
@@elguada123 thank you for the information..i wonder why other people comment the wrong answer?probably fooling other..i am not sure if 1 farad will work but i will try...thank you
@@antoniovillarama6397 it’s only for power factor correction. A capacitor will in no way reduce your kWh consumption
This old concept, nowadays digitalized meters has come and are fixed in all homes office's, factories. This technique is of No Use... 🤔
Correct
40uf. Running capacitor good for the house... 100% leget
how many uf of the capcitor.
What is the number of the capacitor that you have placing?
You inform that.
Capacity value please .