Upgrading the BASS! 2017
Вставка
- Опубліковано 21 сер 2024
- visit: www.stevemeaded... - Join our fun, friendly and knowledgeable community today!
Get Second Skin’s #1 Sound Deadener here
www.secondskina...
SMD Products can be found at www.wcCarAudio.com , Amazon, Ebay and more!
Just trying to add some quick BASS to my F250 Superduty! This Might not be the most glorious work, but it needs to be done! Thanks for watching if you did!
#Ford #B2Audio #Speakers
Support these videos here! / meade916
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ smd-steve-meade-design...
Follow: / meade916
Visit Sonic Electronix at www.sonicelectr...
follow my instagram for daily live feeds and basically my daily routine in little tiny squares you can click on. instagram.com/meade916
meade916 bang some dj screw in the Tahoe
@Conner no shit on the programming. No way on the straight pipe. LOL. That is literally the last thing i would ever do. Could use a little tune though. Or just leave it alone it's great the way it is stock.
what kind of cutter did you use to cut that wire??
God Bless you and Family. Salute #SMD
How can I get in touch with this guy...potential work but I'm not in California....any giveaways or donations you want to do?
I know it's a LONG video just showing wire..imagine how it was to do the work while filming and then spending 7 hours editing when you get home. I love this but it is work! I appreciate everyone who watches, especially if you watch the entire thing! Thank you!
I'll always watch till the end. I always get new ideas for systems after watching your builds. I'm making plans for my wife's Ford Flex right. Not looking forward to that wiring.
Doing it correctly , and work business on top of it then editing you are showing what quality hard work is done , no short cuts!
I'm glued from start to finish.
Thank you for your time scrubbing all this content together.
Ive watched this like 7 times now. Just entertaining to me. As i have the 2017 f150 and needed ideas for the big 3 and fuse block position
I wish there was a shop like this near me that does such quality work. The attention to detail is second to none!! Mind Blown
Same bro!!! I’d be willing to pay 5-10 grand for a superb system but I can’t trust any shops in my area (vista CA)
Try here in Southern Maryland. The shops in my area are laughable and all the reputable shops went out of business because of how new cars come with decent sound systems stock and people are cool with what they put out.
Honestly!
Same here. None of the audio shops here carry 0/1
Just order it online, smdh.
Hey man don’t apologize for the noise, you have a business to run and money to make , you run those machines anytime you need to and we’ll deal with it
"just out of the principalities of the situation"...gotta love that statement
hahahahah!!! i was wondering how many people would pick that up :D :D
Reppin the CAF shirt. Steve always throwing the love to others!
Rivet nuts are my new favorite tools for car audio installs. They just look so clean and stock. They always look like they're meant to be there. Even for securing boxes, wiring, brackets... they work miracles for everything car related.
that was random...but thanks i guess. lol
I wanted to say mad props for representing CAF. Both in car audio and both competitors. This is how everything should be. Work together!
as a Ford tech that is typical for the batteries to leak out of the caps, the batteries usually only last a couple yrs anyway as they cook to death from engine heat.
Sounds like bad design on Ford's part
@@philb707 genious idea to stick batteries in any engine compartment in any vehicle. especially today with as hot as engines run.
@@juggernautxtr touche'
Those ford logo heatshrinks are bad ass, good stuff sir
I heard walk by Pantera and immediately liked the video
Steve, my mind was just blown.
It took me a minute to realize that was your son. I don't know why I subconsciously imagined he'd be doing the Bart Simpson thing and stay looking the exact same for all these years. I've been drooling over your work for a long time now. I remembered scrolling through the hundreds of pictures you put up of the gold tahoe getting the SMD treatment and thinking it was awesome that your boy was out there helping and learning. So to see him now as a man and probably older now than I was when I was poppin chubs over 4 18" BTLs (or even the DDs) in a tahoe knocking glass eyes out, it blew my mind a little bit and got me all nostalgic.
Huge admirer of the level of craftsmanship and end results you produce and it's not an exaggeration to say my bucket list includes one day being able to bring a vehicle out to your shop and letting you go crazy with it.
One tier down from that in the priority list of life goals is just to sit in the tahoe for a demo. So I don't know if you ever make random ass cross country trips but if you happen to find yourself in the Dallas TX area and you're hauling some bass around...
HIT. ME. UP.
All the best man, keep doing what you're doing.
Never apologise for ur machines running Steve, we appreciate every video you upload, and we understand that you are a busy man, thanks for doing a great job with all your great products keep grinding and keep your brand growing and thriving
What a crazy and exciting video! And, one of the most important parts to any after market project. The electrical can make or break a system. Thanks for the refresher course.
Don't worry about the machines in the background it's just the sound of success. Love your videos man
Man I worked on the flight line for the military for 14 years. That background noise is nothing. Soothing, ya might say lol. Thanks for the vid!!!
I have never been jealous of heat shrink before. Now I want to cut mine off and redo it with factory logos
Love the video bro im 15 years old and has been into speaker for 3 years now i hooked up and wired my dads system in his car
Electrician here, Look up the "ty-rap" tool. Its a really clean way of installing zip-ties., Ty-Raps have metal on the connection end, and you can use the Ty-Rap gun to install them.
Thanks for taking the time to upload an install video I miss em lol
how do you "miss em"? i never stopped doing this. You should sub the channel so you don't miss my vids when i post them. :D
@@meade916 I've been a sub since you built chickens Escalade at your house when it used to be that pearl white
I am so glad to see you do a video of an install. Its been awhile and people question us daily in our shop. And I'm watching this and seeing our works is pretty damn spot on with eachother. Just nice to see another guy in the field keeping it real on install day.
I like how the family is involved in fulfilling a passion that happens to also be a relatively fun career!
Yeeaahh!
I love that dog, and every video is much appreciated.
Steve... I really enjoy watching you work on projects. You can just whip stuff together like it was meant to be. You've definitely given me some confidence when I work on stuff. I appreciate you taking the time to share the videos. I remember watching you work in the car port at your house. You deserve the benefits of your hard work.
Thanks again !
Coming along nicely! The Ford logo on the heat shrink was a nice touch as well. Really look forward to seeing this bump!
great quality. been watching your videos for probably ten years. keep it comin man. im glad you have progressed into what you have.
Always remembering you forgot a piece of the big three. I don't mind the machines making a racket. That means you're not out of business. Baby is looking very happy. You are so blessed man. Thanks for letting us watch parts of your journey.
Above the audio game!! Heat shrinks are bad ass!👍👍
I seen it all now, You got a machine that cuts shrink wrap with any Logo you want, bro that's way cool.
If possible I'd like to buy some pieces of shrink wrap from you for my Custom PC power supply cables with Corsair logo on them? They just the bee's nuts. Just let me know how.
STEVE, can you make a video explaining and showing the difference between "STRAPPING" amps and "DAISY CHAINING" amps cause a lot of people can't hook up 4 subs and 2 amps, one amp per set of subs. I think that would an awesome "how to" and "explanation of difference" between the two methods.
Don't worry about the background noise, we're all happy to hear them going, that means more product availability! Thanks for the vids Steve!
thanks man!
I like that you do these kinda vlog/step by step build videos. I mounted my fuse for my subs on top of my engine fuse box the same way you did, and have had thoughts about it it was something others had done. Thanks for quieting the doubts, Steve!
Steve the dealer fills the battery to high and that’s why you have corrosion you can see the stains on the battery so check those battery caps make sure there sealed
almost every single 6.7 2017+ leaks. Had the same issue, replaced mounts with billet alum. mounts and new Odyssey AGM's.
Steve makes awesome products and I’m fortunate enough to run his stuff in my build. But what really makes me happy is Baby! I hope he gets in the way more often lol. Thank you for what you do Steve!
I like the heat foil as added protection for your wires...better safe than sorry
I hallucinate with the professionalism that you do everything
his attention to detail is on point
That shrink wrap is the coolest little addiction ive seen on any project. So simple but sych an easy and great finishing touch.
Lol wearing a CAF shirt thats awesome
Dude i learn so much when i watch you work. Thanks so much for all the knowledge you share bro it really does help!
Great video man. Love how you do your wiring.
I see a lot of criticism in your videos by people that probably don’t even know the first thing about installing a car stereo. People that don’t have anything better to do with their time. They can always turn the video off.
Incredible attention to quality and detail in your installations. Your editing is on point as well.
Haha only Steve could make a video about running wire entertaining. Keep em coming!
Hey Steve this is one of the best most awesome videos that you made test novice that are still learning and watching these born videos to a lot of people are or this amazing to people like me I like this type of videos so thank you for your hard work
Don’t apologize for the machines brother. We understand the hustle! Can’t wait to hear them B2’s bumpin’!
Look at all that beautiful 0gauge
Never apologize for your machine that’s what makes your money
I was like no big 3 ? Is Steve ok? Then boom you never let me down. Practice what you preach. Great job never skip steps no matter the system size.
Very cool to see all the professional work on a project like this, especially on a 6.7 PSD F250, and I really like the "Ford" logos you printed on the cable connector covers. You keep it simple but professional, the best!
They are all "Crazy and Exciting" videos 28:17 Steve 😄
Steve dont apologize you got to make money love your video's 👍👍👍
This video was very informative as to how I’ve watched so many people over the years hook up wiring wrong as hell so when I begin to do my rebuild on my system I will do it correctly this time and most likely have way less issues from it this video is straight to the point just like I like it great job yet again Steve
Watching Steve's videos are mandatory.
Damn bro the big Ford is coming along good, shidddddddd Ford themselves would be proud of the wiring job you did making it look like it was done in the factory...
love the custom shrink tube. makes it look the way the factory should wire their vehicles very clean!!!!
"It's all work and it all has to get done" if there's one thing I could get customers to truly understand it would be this.
Awesome video as always Steve! Been a viewer since 2011 and I love where this channel has gone
I like these wiring videos a lot, it's the one thing I really don't know much about so it's interesting and I can learn something too.
Thanks Steve.
Mr Meade in the laboratory cooking up another A1 build thumbs up.
Wire perfection !! Love the quality of workmanship always
Stilll MUCHO AMOR meaning MUCH LOVE over here from MEXICO Steve keep up that HARD WORK!!!
Big monster systems, or "small" systems, always a nice clean install!! That heat shrink printer is badass!! Haven't seen that before. Way cool!
Gotta love Pantera in the background. Vulgar display of power
Damn that install is clean asf, and the custom fuse holder and heat shrink is just sick. Great video as always.
These installs are so clean and neat !!!
I love that pearl jam is playing while your working that's my favorite band. I've got 1 12 Treo xs sub with a 1500 monoblock Treo amp. I've had the setup for 9 years and it's still running good. Love watching your videos also man.
Always something new to learn from your videos👌🏿
It's the Principalities...Smokey!! ☕🤘🏼
hahahah
Love the pantera in the back brother
Unlike alot of ppl, u took the cover off to screw down the new fuse holder, I honestly can't tell you how many drywall screws I have removed from customers fuse block cover AND fuses cause they just set it there and ran a screw through it and through the fuse beneath it lol.
That is a dream shop foreal...I would live there lol
Aye I seen that MINT. Hoodie shoutout haggard garage baby
So... you have a printer that spits out heat shrink. One day I'll have one. Man you have all the real work out of the way, smooth sailing from here.
Always hit the like before watching
thanks Jay i appreciate that my bro.
Super clean, man. Always setting and raising the bar in the car audio game
Great video as always. I really can’t wait to see how you are going to connect the new system up to the factory deck. I have the same truck and want to do a system like this but I’m not sure how to get the signal from the factory. I can’t even get anything to turn on if I disconnect the stock amp. 😡 man it’s frustrating. Not like the old days when you just plug and play.
@meade916 your batteries are probably overheating and venting out the caps, mine did the same damn thing and I just threw in some Optimas to get me by.
Steve is the best car audio installer hands down
nah. Not even close. But i appreciate ya. thanks!
Meade you make it look to easy , and we know it isn't, I have a f350 lifted 10in so it's really going to be fun to do the big 3,lol, but I wish that I lived in your state I'd bring my truck to you.
I'm doing my big three upgrade today using sky high 0 gauge. I live in the UK and got my wire from Bladeice. They also do B2 Audio. Anyone shopping for braided sleeping for 0 gauge in Europe get 15mm for a snug fit.
That is a big truck. I seen one of those trucks at Home Depot and it made my suburban look like a damn four door escort lol. You did an amazing job as always.
Willie McCraw I also have an escort then😁
01 escort gang 🤣
Thanks for the update. I watch all of your vids. Keep up the good work brother.
I really respect the fact that you guys were listening to the black gives way to blue album on the towers! XD saw them live at DTE when that album came out.
The Ford emblem is a really nice touch on the ends of the wires.
I love seeing a job done properly. Something to be proud of.
Love these videos Bro-Ski
i don't mind the sound of the machines in the background it adds to the vibe
Looks like someone is getting ready to be the next “ dr Dre beats “ of car audio like Chrysler and other company’s. way to go if ya make it, either way way to go! Been watching since the civic.
No Dog hairs 👍🏽 looking good man!!
Tow rig gonna be slappin this summer!
Love BLS & Pantera playing in the background.
Tedious work! But in the end, it's gonna be nice!
a lot of good music playing in the background
Def an awsome truck . Good shyt bro.... I was to cheap for a crimper so I improvised a long time ago on my power wires I'll get the matching terminal on my 0... I'll flip it up in a vise add alittle flux... heat the terminal with a torch as I'm puddling in solder to the brim and dip my power wire in hold it for 10secs. .. it kinda became a habit and awsome and I've stuck with it.. working on diesels and owning one them cables are mandatory for your starting system 🤘badass 6.7 bro...
Thanks for taking the time to continue putting these vids out even though your busy making your products man 👍🏻
Can I ask why you put the cable from the alt to the fuse plate vs the battery? I’m about to do mine and curious. Will it still help the battery in that location ?
@@jcook8191 If you notice our SMD Fuse holder, one side is a solid bar. Both the battery and the alternator are connected on that same bar.
meade916 thanks for the reply . I never knew you could do it like that
Can’t wait see this system finished
Dude, Steve, You really need to do the Deletes on your truck. My 6.4L King Ranch went from 11.2 MPG to about 19.8 MPG!!!
I bet if he's planning that, it's for the truck to go out of warranty first. No idea!
Some orange header wrap works good to. I worked in a foundry and we used it on come of the cables to protect them
Man I love your attention to detail on everything, even down to the heat shrinks. I'm about to actually install 2 15s in my 07 Highlander, doing big 3 today, running amp wires tomorrow then subs and amp when they come in on Tuesday. I also Have 2 15 inch old school Bostwick hdx in my ext cab s10. That little truck pounds hard.
What’s link for that crimping tool?