Your HA-3/6s look stunning! The Bextrene cones on those B110s seem to be prone to cracking with age and exposure to UV, so it's probably a blessing in disguise that the coil was done for.
@@haycrossaudio5474 that's nice that the HA38 will be the same size as the BC1...will it have the super tweeter and will yours sound as good or better than the BC1...because the BC1 is highly praised... hopefully you would be the only person I know that can bring that kind of sound back...
Pretty much all within 5%. The tiny 330nF and 680nF within 10%. Nothing wrong with any of the capacitors or inductors. Just need to replace the resistors
@@haycrossaudio5474 I've inherited an old pair of 15ohm Rogers LS3/5A and I'm in love with them. They sound amazing, holographic, addictive. They have probably drifted out of spec and sound a little brighter (and more open) than an in-spec 11ohm pair used for comparison. Is there any easy way in the crossover to bring down the treble output slightly? Thanks.
Oh I really enjoy Your great work! And hope for a pt.2...😊
They certainly tried hard to fry this pair😂! When will we see the Ditton 66 part 2 and demo?
Your HA-3/6s look stunning! The Bextrene cones on those B110s seem to be prone to cracking with age and exposure to UV, so it's probably a blessing in disguise that the coil was done for.
I inject 5minute epoxy underneath the cone skin round the dust cap when they separate . Done with a syringe and only a tiny wee bit it works a treat .
Are the HA-3/6 related to the Spendor BC1? They look pretty similar.
@@veraluxmundi2032 Yes I'm following the tweeter, super tweeter design. The HA3/6 is smaller than a BC1 but my HA3/8 will be the same size as the BC1
@@haycrossaudio5474
that's nice that the HA38 will be the same size as the BC1...will it have the super tweeter and will yours sound as good or better than the BC1...because the BC1 is highly praised...
hopefully you would be the only person I know that can bring that kind of sound back...
Love your video, very instructive . . . keep going.
Great educational video, thank you.
Great video , keep them coming
Matt, are you going to use super tweeters in the HA38 ?
Yeah same combo as the HA3/6
God thats had a burn up 😔
Those seem like pretty broad tolerances?
Pretty much all within 5%. The tiny 330nF and 680nF within 10%. Nothing wrong with any of the capacitors or inductors. Just need to replace the resistors
@@haycrossaudio5474 👍
@@haycrossaudio5474 I've inherited an old pair of 15ohm Rogers LS3/5A and I'm in love with them. They sound amazing, holographic, addictive. They have probably drifted out of spec and sound a little brighter (and more open) than an in-spec 11ohm pair used for comparison. Is there any easy way in the crossover to bring down the treble output slightly? Thanks.