Hidden talent: You can assemble and not just disassemble 😂 You can do anything with the Dodge Whisperer in flip flops 💪😂 Alway fun to watch you figure your way through it! Whether DW is laughing or helping you. So happy for the growth in your channel and I wish you continued success!!! ❤️🐞🐐
The Dodge Whisperer in flip flops is his ultimate mechanic form hahahaha! He gets a big laugh watching me figure things out , but in the end he always helps when I get confused haha. Thank you so much for yalls support!! I'm hoping before long I will have more wheeling videos and really hoping I can take off work and go wheeling with yall in the Fall! Appreciate it and Thanks for always watching!!!
If you ever have to do that again to lower control arms you can just press the rubber bushings out with its pivot shaft and just grease up the 2 polyurethane bushings with silicone grease and push them and the pivit shafts back in by hand . they slide in easy .
I replaced those same bushings for my 67 Coronet this morning. We must have watched some of the same videos. I heard that Dulcich used valve spring retainers and had some laying around. They are the exact size to slide in the large sleeve and worked great. I got creative with the small sleeve, I slid a ball remover attachment over it and welded some boogers to capture it (didn't weld together) then pressed it off. After removed I pushed out the other way without the weld bead, worked awesome without the need to cut.
That is a great idea! I have always heard horror stories about doing these bushings but glad I found a decent way to do them. Appreciate it and Thanks For Watching!
Actually it was my first time, But the Dodge Whisperer was offering lots of advise....... Mainly because he wanted his shop back haha Appreciate it and Thanks For Watching!
Great video Duddie! I bet it's a blast hanging out at the dodge whisperers shop! I watched the video on the junkyard engine. Its going to be a monster 👍
It is a lot of fun!! Until he watches me fail several times and laughs, But he is going to build me one hell of a hot rod motor! Appreciate it and Thanks For Watching!
Nice work Duddie...front end done and not a single bleeder or bruise...maybe it was the supervision, maybe it was a sign from God, maybe it was just dumb luck hahaha...another job ticked off and well done on the lower inner bushings, sometimes they can be an ass... D holes ( as we call them here ) look good on the car too mate...cant wait for the next one...and also congrats on the engine, gotta have a win sometimes my friend!!
Honestly...... Pure dumb luck HAHA I had some close calls and a few bumps but nothing major. The Engine is going to be Awesome!! Ole DW is going to build me a hot rod motor! Appreciate it and Thanks For Watching!
HAHA It's okay, I was cursing the previous owner of the Valiant for all the damage and booger welds, Just trying to keep the previous owner tradition alive haha Appreciate and Thanks For Watching!
Plus this car was "Custom Lowered", Heated rear springs, and I didn't measure the torsion bar bolts, just uga dugga them on haha Appreciate it and Thanks For watching!
@@DuddiesAdventure Well of course I think it’s me… And the people around me reinforce this every day… They’re always holding up one finger whenever they see me. 😂😂
Whats wrong with that? You need to buy more clean, one owners... I know The Dodge Whisperer and I stole a strut rod off that thing for Scotts valiant at one point. Youre lucky thats all we stole... We still need more Larry in these videos
What a score on the engine! Good for you!
Thank you RON! Appreciate it and Thanks For Watching!
Hidden talent: You can assemble and not just disassemble 😂 You can do anything with the Dodge Whisperer in flip flops 💪😂
Alway fun to watch you figure your way through it! Whether DW is laughing or helping you.
So happy for the growth in your channel and I wish you continued success!!! ❤️🐞🐐
The Dodge Whisperer in flip flops is his ultimate mechanic form hahahaha! He gets a big laugh watching me figure things out , but in the end he always helps when I get confused haha. Thank you so much for yalls support!! I'm hoping before long I will have more wheeling videos and really hoping I can take off work and go wheeling with yall in the Fall! Appreciate it and Thanks for always watching!!!
That was a lot of work! Awesome work buddy! Super pumped for your new engine. #TriplePickler!
The Dodge Whisperer is going to build a Awesome engine for this thing! I can't Wait! Appreciate it and Thanks For watching!
Awesome Duddie!! Great start!! Yee Haw!!
Appreciate it and Thanks For watching!
If you ever have to do that again to lower control arms you can just press the rubber bushings out with its pivot shaft and just grease up the 2 polyurethane bushings with silicone grease and push them and the pivit shafts back in by hand . they slide in easy .
I saw that in a Jonny Mopar Video, But I had already ordered stock replacements haha Appreciate it and Thanks For watching!
I replaced those same bushings for my 67 Coronet this morning. We must have watched some of the same videos. I heard that Dulcich used valve spring retainers and had some laying around. They are the exact size to slide in the large sleeve and worked great. I got creative with the small sleeve, I slid a ball remover attachment over it and welded some boogers to capture it (didn't weld together) then pressed it off. After removed I pushed out the other way without the weld bead, worked awesome without the need to cut.
That is a great idea! I have always heard horror stories about doing these bushings but glad I found a decent way to do them. Appreciate it and Thanks For Watching!
Nice job Duddie. Looks like you've done that before. Thanks for sharing and take care ✌️
Actually it was my first time, But the Dodge Whisperer was offering lots of advise....... Mainly because he wanted his shop back haha Appreciate it and Thanks For Watching!
Great video Duddie! I bet it's a blast hanging out at the dodge whisperers shop! I watched the video on the junkyard engine. Its going to be a monster 👍
It is a lot of fun!! Until he watches me fail several times and laughs, But he is going to build me one hell of a hot rod motor! Appreciate it and Thanks For Watching!
Wow, you got a lot done!!! Congrats !!
It was A lot of work, But the Dodge Whisperer helped me along the way, Appreciate and Thanks For Watching!
looking good going over to see the motor
Thank you! Yes check out The Dodge Whisperer! Appreciate it and Thanks For Watching!
@@DuddiesAdventure yes ill go see his channel to.love your crew cab truck
Nice work Duddie...front end done and not a single bleeder or bruise...maybe it was the supervision, maybe it was a sign from God, maybe it was just dumb luck hahaha...another job ticked off and well done on the lower inner bushings, sometimes they can be an ass... D holes ( as we call them here ) look good on the car too mate...cant wait for the next one...and also congrats on the engine, gotta have a win sometimes my friend!!
Honestly...... Pure dumb luck HAHA I had some close calls and a few bumps but nothing major. The Engine is going to be Awesome!! Ole DW is going to build me a hot rod motor! Appreciate it and Thanks For Watching!
I used poly bushings and they squeak like crazy!
Oh for sure, I regret not greasing the crap out of them haha Appreciate and Thanks For Watching!
Buen trabajo duddie saludos
¡Aprecio y gracias por mirar!
That front end is more like missile guidance now that you found that Super Commando Armadillo 360.
YES!!! The Super Commando Armadillo 360!!! OR should I say 408!! Appreciate it and Thanks For Watching!
Nice vid bro 👍🏻
If your Interested in the Engine check out "The Dodge Whisperer", He is building it on his channel. Appreciate it and Thanks For Watching!
@@DuddiesAdventure will do 👍🏻
The next guy to tear that front end apart is going to curse you with the mixing of A-body parts 🤣
HAHA It's okay, I was cursing the previous owner of the Valiant for all the damage and booger welds, Just trying to keep the previous owner tradition alive haha Appreciate and Thanks For Watching!
Yeah whenever I have that “the next guy” thought, I usually conclude the next guy is probably still going to be me but I’ll forget what I did by then
HAHAHA Yup that's me too HAHA
Like Paul from fab rats says frequently we know it's nice because we do it twice
Do it Right, Do it Twice!! HAHA Appreciate it and Thanks For Watching!
Lower on empty seat side!!!
Plus this car was "Custom Lowered", Heated rear springs, and I didn't measure the torsion bar bolts, just uga dugga them on haha Appreciate it and Thanks For watching!
First! 🤘
Wait who is first? you or My Kar's Shop?
Zing Zang done ✔
And just as fast as it was pushed in, it was dragged out by out by the Kubota!! Appreciate it and Thanks For Watching!
First! 😎😎
Wait who is first? you or Insane Illusions Fabrications?
@@DuddiesAdventure Well of course I think it’s me… And the people around me reinforce this every day… They’re always holding up one finger whenever they see me. 😂😂
@@MyKARSShop 🤣🤣
@@GoatOffroad 🤷♂️😂😂
Awesome dude its 408 time
The Super Commando Armadillo 408 as Royboy calls it !
How's the frame looking. With them tequila welds. Loose is fast. No friction.
Frame is good!!! Well Good enough for me hahaha Appreciate it and Thanks For Watching!
Whats wrong with that? You need to buy more clean, one owners...
I know The Dodge Whisperer and I stole a strut rod off that thing for Scotts valiant at one point. Youre lucky thats all we stole...
We still need more Larry in these videos
Yes I am very aware about the stolen strut rod hahaha, we got creative to make the strut rods work hahaha Appreciate it and Thanks For watching!
Are you 2 old buddies or related?
We are old buddies, Known each other 20+ years HaHa, Appreciate it and Thanks For watching!
@@DuddiesAdventure That is pretty cool.
On cleaning the parts? Nah.... just drive it
You get it!! I ain't got time for show and shine! Appreciate it and Thanks For Watching!