I have the exact same press and engraver. I just got the same patches off Amazon. I was wondering what you found was a good rate and depth for engraving on those patches with the xtool d1 pro. Also what a good temperature and time would be for applying the patches to the hats.
Amazing video! I have a F1 and been struggling with those precut patches with the stitching on them. If you can share what you have found to work with the settings that would be amazing! After watch this video I decided to skip the circuit and go for the bigger hat press. Keep up the great videos!
Thanks so much for the video! I've been experimenting with engraving and cutting leatherette patches and I can't seem to get a nice cut. Do you happen to have settings handy for the F1 Xtool to cut through leatherette? Thanks!
This video is everything I needed thank you very much for that. I already had the hat press nailed out, I just needed to find a good budget, friendly laser machine and you just did that! Fist bump virtual!
What laser cutting software did you use? Settings with the hydbond that worked for you? Did the hydbond create any gas while it was being lasered? Looking into getting in this and wanna know if I need to get enclosure for my laser with hydbond.
Hi just came across your great video! Question for you what type off cloth did you use on the hat? Also was the med or firm pressure did you use? Thanks!
A great video! My X-Tool just came in for printing t-shirts as an addition to my other machines and I ca't wait to start working on golf hats. Thanks a lot.
Great and informative video, but I do have a question: what settings have you found our best for pre-made leatherette bonding? I have been making my first few hats, and the patches come out perfectly from my Glowforge, I have found that only the center of the patches are adhering well after being pressed. For reference, the settings I’m using are 287° for 30 seconds. Thoughts or suggestions on how I could improve my results?
Hi. I have recently purchased the same vevor hat press. I know that the pressure is controlled by the knob on top, but how do you tell what a general setting is for the pressure? For example, on another tutorial, a person recommended a medium pressure for a leatherette patch with a trucker hat. What would be a good starting point on that knob to give a medium pressure? I’m trying to avoid a lot of trial and error with the hats and wasting a bunch of money in the process. Thanks!
You can tell how much pressure you’ve applied by how difficult it is to press the handle down. In my experience, you shouldn’t have to fight the handle and it shouldn’t really be clamping so hard. That’ll leave creases in your hats.
Have you damaged hats with the heat press? I have a similar cheap press I got with my first sublimation set up. When I make hats I usually crease or dent at least 1-2 hats per 12 figuring out the right pressure settings.
out of all brands/models, which machine(s) would you recommend starting with for leatherette hat patches with the intention of creating a business, I'm looking to spend the least to start and will upgrade machines as needed. I would like plug and play or closest to, and I want to produce a great quality product from the start. Thank You !
Dude, fantastic presentation. I own a Glowforge and am VERY interested in this field. I’d love to work with Leatherette, BUT is it safe for my machine?
hey there, i noticed you kept the cardboard stuff inside the hat when pressing. do you find that helps you in the process? expecting the same press actually in the mail the next few days!
Great video! Best one I've seen! Informative, to the point and loved your co-star. ;-) My Vevor arrives Wednesday. What did you use for your buffer between the patch and the press? Also, for leatherette patches, what temp and times settings do I use? Thanks so much!
My wife sees clothes so I just grab any scrap she has for the buffer. Some materials do work better than others I’ve found. For the settings I do 285 degrees for 60 seconds and I check it frequently. I’ll press for 15 seconds, lift to make sure it looks good and then press for another 30-45 to finish it off.
Thanks so much. Worked like a charm. I have a little tip. I tried using elastic to hold the patch like you did in the video, but it left slight ridges on the patch. So...next one, I warmed up the glue just a tad with my heat gun and put the patch in place. Then I immediately pressed it with the Vevor. It didn't budge and no more marks on the patch. Wah-Lah! Thanks again! @@TheReformationWoodshop
I just recently got the D1 Pro 5W and I am having trouble with the settings and residue anytime I press the patch the black come off on the fabric i’m using to cover the patch or the black spread onto the patch. Can you tell me what I am doing wrong? Maybe the settings on how it’s engraving if so can you tell me what settings that needs to be set such as power, speed, distance. Thank you!
I know the F1 tool may not be the best choice for actually cutting out leather patches out, but if thats the only machine you have, can it cut through leather? Have you tried?
I’m mostly using the P2S and can’t remember the settings I used for the F1. I would suggest joining the “XTool F1 User Group” on Facebook as it has a wealth of information on settings.
What are you putting over the leather patch so it doesn't scrotch it? Also, the patches you found on amazon, what was the temp/time for them to adhere right? I seem to be having issues not getting that stuff to adhere.
I use a piece of fabric my wife had laying around but most folks tend to use some kind of silicone. As for temp and time I set it to 280 and press the hat alone for about 10 seconds, then the hat with the patch, elastic band and cloth cover for another 10 seconds then the hat with the patch and cloth cover for another 20-30.
@@TheReformationWoodshopso I have the same hat and the same patches and tried doing it at the 280 for the time stated but I can’t seem to get the corners to stick when doing it. I don’t have the elastic though. Do you think that’s the reason?
Is it possible to do a dtf transfer on these leather patches and then heat press the patch on the hat? This will be my first time making hats excuse me if this is a stupid question lol thanks for any info
@@TheReformationWoodshop thanks for your response and do you know any cheap laser engraver machines as im just starting the hat business? Thanks in advance!
I have in the past if I apply to much pressure with the machine. All I did to fix it was dial back the knob on the hat press and let the heat do the work and not the pressure
Having problems with what temperature and how long should I press. I'm using leatherette patches that have been lasered. My result is dark markings almost like it bled through.
Awesome video! I’m on like step 1 but that hat press you showed is great. The Cricut press is nice but for $47 more I wish I got that press instead. Thanks!
I have been noticing a dark area on the patches there the seems are. I have a soft cloth over the patch to protect from the heat but I can not figure out how to make this any better. Any ideas?
It may be a quality issue with the patches you are using or it may be a pressure issue with your machine. You can loosen the knob that applies pressure and see how that helps. Are the patches you have from Amazon?
Do you ever have an issue with the hydbond adhesive leaking out the edges of your patches when you press them on? Trying to figure out how to stop that from happening!
I've had the same issue, if I see it happening I usually stretch the patch out as soon as I pull it off the press because the adhesive is still hot and able to be moved. As for why it happens it may be that we're using to much heat or pressing for too long.
I have 5 hydbond patches I made for the Richardson 112 hat There's a local screen printing place that will use their press to attach them. Any chance you know what time and temperature I should tell him to set these to? He said he didn't know but I thought his press would have that info. Any advice?
250 for 30 seconds then check the appearance and adhesion. If they feel binder we’ll leave it but most people go for longer than 30. It’s a process that allows for some experimentation
Hi, I am brand new to engraving. I just got my X Tool F1 yesterday. I am trying to get my ranch brand engraved on Hydbond Letherette. I need to engrave the brand and cut the shape out. Can you please help me with what my settings I should start with. The letterette is burning and melting. Or where to get information about where to start? Thank you!
The patches you ordered from Amazon. How would you rate them? The reviews are positive and negative all at exact same time. Have you noticed any burning with the heat press? Have you noticed any of the patches not sticking properly?
I have had issues for sure. You can burn them and if you don’t heat the hat they sometimes don’t adhere all the way. I’ve got it down to a science now though so I don’t fumble too much with them anymore.
Thanks for the video it was great ! What settings are you using on the D1 40w to get such a clean image ? Ours are always so black and not in a nice sharp clear way
For the 40W start out with 30 engrave and 80 cutting power and tweak it from there. Your material might need something a little bit different. I only use air assist when I’m cutting as well. If I use it on engraving it dirties up the engraving
Hey buddy i forgot to ask..what are your settings on the xtool and how hot do you set the cricut shirt press when applying the hydbond to the leather? Thanks again!!
Hey, I just started doing patches, engraved my first one yesterday & will be putting it on the hat today from my alldayshirts order, do you ever stitch the patch on or do you only deal with adhesive from doing a heat press? Also have you had any issues of them coming off the hat over time?
I don’t stitch at all although I’d like to try. The only time I had issues with the adhesive coming off was when I was doing them with an iron by hand. Now with the press they are indestructible 💪🏻
I tried ordering leatherette patches from Amazon but when I tried to iron one onto an apron the heat from the iron didn't make the adhesive stick. It was very disappointing.
Since uploading this video, I’ve ordered Amazon patches, and I think their quality has decreased. I’m gonna stick with using Hydbond patches and adhesive.
I have Lonestar leatherette sheets with the adhesive already on them and using my F1 X tool... I keep getting a flame alarm when trying to cut! I am using the settings that x tool says to use for their leather patches. I am guessing the settings are off and causing the "flame" that triggers the alarm.. any suggestions on settings for cutting with the x tool F1? I know you said you use the D1 for mass production, but have you used the F1 and can possibly give some tips and settings on using the F1?
Markis or anyone that can help! I'm having dramas with the seems in the hats. As they are raised a little a stripe mark is showing through on the leatherette side. I've tried different temps/times but can't work it out. It's like the glue is seeping right through on that seem. It's the same width as the the whole of the seem. Any ideas? Thanks
I’ve had this same problem and I think the issue is pressure. Try dialing it back… also quality of patches really matters. The Amazon ones has decreased in quality recently.
I have the auto version of the vevor, not quite sure it can dial back, i'll check it out! I think I got the same patches you recommended, any other suggestions that come as easy as that? thanks heaps!@@TheReformationWoodshop
Great video, I have the same hat press for years and do not have the success you have . I find the Richardson hats do not sit right on the platen . I am going to play with your time and temperature. Thank you
Thanks for sharing. I loved that you showed your kids too, congratulations on the beautiful family.
I have the exact same press and engraver. I just got the same patches off Amazon. I was wondering what you found was a good rate and depth for engraving on those patches with the xtool d1 pro. Also what a good temperature and time would be for applying the patches to the hats.
Amazing video! I have a F1 and been struggling with those precut patches with the stitching on them. If you can share what you have found to work with the settings that would be amazing! After watch this video I decided to skip the circuit and go for the bigger hat press. Keep up the great videos!
Thanks so much for the video! I've been experimenting with engraving and cutting leatherette patches and I can't seem to get a nice cut. Do you happen to have settings handy for the F1 Xtool to cut through leatherette? Thanks!
i like your hustle...i would like to start my own business now...lets do this..God Speed !!!
You can do it! Good luck man!
Excellent tutorial. Thanks for sharing the info; definitely helpful!
Hello, dir you do a double cut on the shape to get the machine to cut through the leather? These patches are very nice!❤
I do an outline around my designs and set the program to cut that layer and it pops it right out.
Great video. Do you have a preferred vendor for pre cut and glued patches? I don’t want the cheapest thing made, don’t want the patch falling off.
Crafted Supplies has really sturdy precut stuff. I bought one of each color they offer and they are very rigid
Thanks!!
@@TheReformationWoodshop
This video is everything I needed thank you very much for that. I already had the hat press nailed out, I just needed to find a good budget, friendly laser machine and you just did that! Fist bump virtual!
Good to hear! Good luck!
Hello, just subscribed. This is amazing, From watching the channel, I've been really trying to increase my skill.
Thanks and welcome! If I can do it, so can you🤣
Great video! Thank you. Just ordered hydbond. Cant wait to make my first hat
Awesome good luck!
What laser cutting software did you use? Settings with the hydbond that worked for you? Did the hydbond create any gas while it was being lasered?
Looking into getting in this and wanna know if I need to get enclosure for my laser with hydbond.
Hi just came across your great video! Question for you what type off cloth did you use on the hat? Also was the med or firm pressure did you use? Thanks!
A great video! My X-Tool just came in for printing t-shirts as an addition to my other machines and I ca't wait to start working on golf hats. Thanks a lot.
Good luck to ya!
What buffer do you use to put over the leather patches when you are using the heat press?
Great video! What settings did you use for the real leather patch you did?
Very helpful vid! I like some of those custom patches you've made.
You can do it! They definitely are the best option!
Where do you get your hats From? I'm looking right now thank you
Would you be willing to share the settings you used for the synthetic leather, hydbond, and real leather? Thank you!
Great video dude. I'm looking into starting a small hat business. Watching your video was inspiring kool dude. I really like them Richardson cups too
Good luck brotha!
Great and informative video, but I do have a question: what settings have you found our best for pre-made leatherette bonding?
I have been making my first few hats, and the patches come out perfectly from my Glowforge, I have found that only the center of the patches are adhering well after being pressed.
For reference, the settings I’m using are 287° for 30 seconds.
Thoughts or suggestions on how I could improve my results?
Hi. I have recently purchased the same vevor hat press. I know that the pressure is controlled by the knob on top, but how do you tell what a general setting is for the pressure? For example, on another tutorial, a person recommended a medium pressure for a leatherette patch with a trucker hat. What would be a good starting point on that knob to give a medium pressure? I’m trying to avoid a lot of trial and error with the hats and wasting a bunch of money in the process. Thanks!
You can tell how much pressure you’ve applied by how difficult it is to press the handle down. In my experience, you shouldn’t have to fight the handle and it shouldn’t really be clamping so hard. That’ll leave creases in your hats.
I have that hat heat press my problem with it is that when I press a hat with a seam in the middle it causes creases..
Have you damaged hats with the heat press? I have a similar cheap press I got with my first sublimation set up. When I make hats I usually crease or dent at least 1-2 hats per 12 figuring out the right pressure settings.
Yeah, there’s definitely some calibration required everytime I get started.
Do you have a video of the M1 from start to finish on making a hat patch, perferably with the silhouette around the logo?
Hi, love your video. How do you cut the different shapes around the images? Thanks
In the program I use there is an "outline" feature and you can set it to cut the material.
Great work. I have the D1 Pro 20 watt. I keep getting charred stains on real leather. What are your settings? Thanks
out of all brands/models, which machine(s) would you recommend starting with for leatherette hat patches with the intention of creating a business, I'm looking to spend the least to start and will upgrade machines as needed. I would like plug and play or closest to, and I want to produce a great quality product from the start. Thank You !
Do you have the link for the leather patches?
Dude, fantastic presentation. I own a Glowforge and am VERY interested in this field. I’d love to work with Leatherette, BUT is it safe for my machine?
For sure, but not for you. Make sure you’re vented properly and not breathing it in.
will you share your settings for the 40w d1 pro for engraving leather and fake leather ? Thank you for your time
Great, informative video. I didn't see the link to the bulk hats you buy, not on amazon?
I just updated the description, thanks for pointing that out! Alldayshirts.com is most people’s first stop.
hey there, i noticed you kept the cardboard stuff inside the hat when pressing. do you find that helps you in the process? expecting the same press actually in the mail the next few days!
I’m not sure it makes a difference 🤷♂️
Great video! Best one I've seen! Informative, to the point and loved your co-star. ;-) My Vevor arrives Wednesday. What did you use for your buffer between the patch and the press? Also, for leatherette patches, what temp and times settings do I use? Thanks so much!
My wife sees clothes so I just grab any scrap she has for the buffer. Some materials do work better than others I’ve found. For the settings I do 285 degrees for 60 seconds and I check it frequently. I’ll press for 15 seconds, lift to make sure it looks good and then press for another 30-45 to finish it off.
Thanks so much. Worked like a charm. I have a little tip. I tried using elastic to hold the patch like you did in the video, but it left slight ridges on the patch. So...next one, I warmed up the glue just a tad with my heat gun and put the patch in place. Then I immediately pressed it with the Vevor. It didn't budge and no more marks on the patch. Wah-Lah! Thanks again!
@@TheReformationWoodshop
I just recently got the D1 Pro 5W and I am having trouble with the settings and residue anytime I press the patch the black come off on the fabric i’m using to cover the patch or the black spread onto the patch. Can you tell me what I am doing wrong? Maybe the settings on how it’s engraving if so can you tell me what settings that needs to be set such as power, speed, distance. Thank you!
Awesome! What are your settings for fill travel speed, power and cut speed and power with the XTool D1? Thanks!
Such a great video / you are really great at explaining
Thank you, you rule!
I know the F1 tool may not be the best choice for actually cutting out leather patches out, but if thats the only machine you have, can it cut through leather? Have you tried?
What adhesive did you use on the heat press for the real leather hat you made?
How do you get the cap designs
What are your setting for the patches? I have the same machine. I'm new. like 1 day new. I just recived the F1 as a xmas gift. Thank you in davance.
I’m mostly using the P2S and can’t remember the settings I used for the F1. I would suggest joining the “XTool F1 User Group” on Facebook as it has a wealth of information on settings.
What are you putting over the leather patch so it doesn't scrotch it? Also, the patches you found on amazon, what was the temp/time for them to adhere right? I seem to be having issues not getting that stuff to adhere.
I use a piece of fabric my wife had laying around but most folks tend to use some kind of silicone. As for temp and time I set it to 280 and press the hat alone for about 10 seconds, then the hat with the patch, elastic band and cloth cover for another 10 seconds then the hat with the patch and cloth cover for another 20-30.
@@TheReformationWoodshopso I have the same hat and the same patches and tried doing it at the 280 for the time stated but I can’t seem to get the corners to stick when doing it. I don’t have the elastic though. Do you think that’s the reason?
What is your laser setting (speed/power)?
Is it possible to do a dtf transfer on these leather patches and then heat press the patch on the hat? This will be my first time making hats excuse me if this is a stupid question lol thanks for any info
I've honestly got no idea. Im not familiar with DTF transfers, sorry.
@@TheReformationWoodshop thanks for your response and do you know any cheap laser engraver machines as im just starting the hat business? Thanks in advance!
Do you know if this machine would engrave baseball gloves? Thank you!
Absolutely!
Is there a more cost effective/friendly engraver? Like $300 USD. For those that can't afford the $800-1000 price tag
What do you use for non leather patches (material)
are you getting an outline of center seam on your leatherette patches after pressing?
I have in the past if I apply to much pressure with the machine. All I did to fix it was dial back the knob on the hat press and let the heat do the work and not the pressure
Thank you Markis! Great video, as always!🔥
Appreciate it! Hydbond rules! 💪🏻
Can you help me when you gave it power and speed to record? Thank you, it would help me a lot.
That all black hat was sick
ESO TAMBIEN QUIERO SABER SEGIN AHI SALE 290 A 60 MIN PERO SON GRADOS FAHRENHEI O CELCIUS
Hi whats the max engraving area and does the screen have to be down when engraving? thanks
Having problems with what temperature and how long should I press. I'm using leatherette patches that have been lasered. My result is dark markings almost like it bled through.
Wow man… great video… ton of value. Thanks!
Glad it was helpful!
Awesome video! I’m on like step 1 but that hat press you showed is great. The Cricut press is nice but for $47 more I wish I got that press instead. Thanks!
For sure, I ended up having to fix some hats I made with the Cricut press because after awhile they started to peel.
What is the ball called that you're putting in the hat when ironing? I keep getting wrinkles... I feel that would prevent that for sure.
It comes with the cricut heat press. It fits the hats okay but not perfect.
Thanks for the video! What kind of respirator are you using? 7:47
do you make logos too ?
Thank you from Prince Rupert
Canada 🇨🇦
Prince Rupert? What’s it like in that little town?
@ShreddinSleds
Prince Rupert is a beautiful place, the fishing nearby is world renowned. 52 cruise ships every summer.
How do you design your hat patches? And what program do you use?
Im using xTools free software XCS and it's fantastic. If you're using a different machine, light burn is the mainstream software.
I have been noticing a dark area on the patches there the seems are. I have a soft cloth over the patch to protect from the heat but I can not figure out how to make this any better. Any ideas?
It may be a quality issue with the patches you are using or it may be a pressure issue with your machine. You can loosen the knob that applies pressure and see how that helps. Are the patches you have from Amazon?
I loved the video, could you share settings for d1 pro 40w?thanks
What are you diode settings to for engraving and cutting? Power? Speed? Line density?
Do you ever have an issue with the hydbond adhesive leaking out the edges of your patches when you press them on? Trying to figure out how to stop that from happening!
With the Hydbond I don’t. I did with some cheaper stuff and I think it was because the temp was too high.
Thanks for your wisdom
What's the adhesive you use for the patch to stick on the hat?
Hydbond. It’s linked in the description 👍🏻
What is the software you use to set up the designs on the roll of leather?
XCS which is xTools in house software.
How do I lesser the wrinkle from the seam down the middle of a hat. Is there anyway to send you a picture to show you what I’m asking
I've had the same issue, if I see it happening I usually stretch the patch out as soon as I pull it off the press because the adhesive is still hot and able to be moved. As for why it happens it may be that we're using to much heat or pressing for too long.
How do you cut out the custom patches? Does that engraver machine do it?
I have 5 hydbond patches I made for the Richardson 112 hat There's a local screen printing place that will use their press to attach them. Any chance you know what time and temperature I should tell him to set these to? He said he didn't know but I thought his press would have that info. Any advice?
250 for 30 seconds then check the appearance and adhesion. If they feel binder we’ll leave it but most people go for longer than 30. It’s a process that allows for some experimentation
Hi, I am brand new to engraving. I just got my X Tool F1 yesterday. I am trying to get my ranch brand engraved on Hydbond Letherette. I need to engrave the brand and cut the shape out. Can you please help me with what my settings I should start with. The letterette is burning and melting. Or where to get information about where to start? Thank you!
This was a great and helpful video! Thank you
No problem, glad I could help!
The patches you ordered from Amazon. How would you rate them? The reviews are positive and negative all at exact same time. Have you noticed any burning with the heat press? Have you noticed any of the patches not sticking properly?
I have had issues for sure. You can burn them and if you don’t heat the hat they sometimes don’t adhere all the way. I’ve got it down to a science now though so I don’t fumble too much with them anymore.
What kind of engraver is that? I have the hat press and I’ve been subbing out the laser. I want that laser you’re using!!
Its the xTool D1Pro (www.xtool.com/products/xtool-d1-pro-2-in-1-kit-455nm-blue-laser-1064nm-infrared-laser?ref=clSNUlHMSPHtmu&variant=43211209081071)
If you do end up deciding to get your own laser I would wait a couple of days because xTool is about to release a brand new and improved laser!
Where can I get customized leather dtf from?
Thanks for the video it was great ! What settings are you using on the D1 40w to get such a clean image ? Ours are always so black and not in a nice sharp clear way
For the 40W start out with 30 engrave and 80 cutting power and tweak it from there. Your material might need something a little bit different. I only use air assist when I’m cutting as well. If I use it on engraving it dirties up the engraving
thank you
@@TheReformationWoodshop
What are you using @ 6:11 ?
I use HydBond but use an iron..this seems like it would work much better! Thanks for the video!
It’s a Cricut heat press made for shirts 🙌🏼
@@TheReformationWoodshop that's better than a $1,000 shirt press...thanks! That's gonna be a game changer!!
Hey buddy i forgot to ask..what are your settings on the xtool and how hot do you set the cricut shirt press when applying the hydbond to the leather? Thanks again!!
Very informative and helpful video.
That’s great to hear!
Hey, I just started doing patches, engraved my first one yesterday & will be putting it on the hat today from my alldayshirts order, do you ever stitch the patch on or do you only deal with adhesive from doing a heat press? Also have you had any issues of them coming off the hat over time?
I don’t stitch at all although I’d like to try. The only time I had issues with the adhesive coming off was when I was doing them with an iron by hand. Now with the press they are indestructible 💪🏻
Great info. And now realizing I’ve gotta get more serious about my ventilation.
Get it!
So gyro laser for engraving and diode laser for cutting?
Hi, thank you for the great video. Could you please share wholesale hat seller website. I could not see it on the description. Thank you
Alldayshirts.com 👊🏻
I tried ordering leatherette patches from Amazon but when I tried to iron one onto an apron the heat from the iron didn't make the adhesive stick. It was very disappointing.
Since uploading this video, I’ve ordered Amazon patches, and I think their quality has decreased. I’m gonna stick with using Hydbond patches and adhesive.
Awesome video, gives me something to think about 👍🏼
Appreciate it Brotha! Good luck!
How do you cut the patches to shape so perfectly are you just using scissors?
I pre program the software I use to cut around the design I import. 👍🏻
I have Lonestar leatherette sheets with the adhesive already on them and using my F1 X tool... I keep getting a flame alarm when trying to cut! I am using the settings that x tool says to use for their leather patches. I am guessing the settings are off and causing the "flame" that triggers the alarm.. any suggestions on settings for cutting with the x tool F1? I know you said you use the D1 for mass production, but have you used the F1 and can possibly give some tips and settings on using the F1?
Air assist on?
Markis or anyone that can help! I'm having dramas with the seems in the hats. As they are raised a little a stripe mark is showing through on the leatherette side. I've tried different temps/times but can't work it out. It's like the glue is seeping right through on that seem. It's the same width as the the whole of the seem.
Any ideas? Thanks
I’ve had this same problem and I think the issue is pressure. Try dialing it back… also quality of patches really matters. The Amazon ones has decreased in quality recently.
I have the auto version of the vevor, not quite sure it can dial back, i'll check it out! I think I got the same patches you recommended, any other suggestions that come as easy as that? thanks heaps!@@TheReformationWoodshop
Thank you! Very helpful video🙏🏻
Appreciate it Clint!
good video, you have a new subscriber. At 2.55, that looks like a Mike Farrington wall 🙂
Thanks for the sub! I’m proud of that! 😏
I ordered the same press but it seems like the part where I place the hat is the wrong size and it’s creasing the hats
That can be an issue with tons of presses I’ve seen some people add their own pad there to form fit the hats better
Do you use xcs or light burn?
XCS 👍🏻
Great video, I have the same hat press for years and do not have the success you have . I find the Richardson hats do not sit right on the platen . I am going to play with your time and temperature. Thank you
They do sit a little funny but it doesn’t cause the patches to malfunction from what I’ve seen so far.
Where can you get cheep embroidered patches
Very good stuff. Thanks
Appreciate it Edmond!
Thanks for the great video.
Glad you liked it!
What settings did you use on your F1 for the blackest engraving?
What was the name of the hat press please ??
Vevor Heat Press s.vevor.com/bfQrRm
Great video and good info. The Hydbond Prerolls link in the comments area goes to "Page not found".
Fixed, thanks!
Does that press leave marks on the cap?
It can if your heat and time and tension settings are off. I believe all presses will if your settings aren’t correct.
How do I contact you about ordering some hats
Came to see about making hats, was surprised to see some hometown names in there. 325 proud.
Ayyy that’s awesome man! Maybe you can swing by a craft show and say hello sometime!