damn brother G those are some hell of the numbers you was Rockin and Rollin bro no damn doubt about that shit I think it's got more in it man I really do to me it didn't seem like you was full speed and you are hanging out with one of my favorite Bros brother Turner hell of a good friend congratulations brother
no I'm not using tough racing belts but took it apart last night and all the teeth on the rear belt are gone not sure what's going on so I put another one on alittle tighter, will see what happens today.
ALWAYS TURN ON YOUR RADIO FIRST!!! That's the problem you're having. If the car decides to take off you have no way of controlling it!!! So always turn on your radio first!!!
+maxx patrol ok, try 34/30, closing that gap will give u more top end less off the line. You need a long road. Then go 34/32 on 6s you'll be up in the 120s
hey man, I have my 4tec setup the way you said but I'm having a problem with my rear belt keeps coming loose after a run or two. any suggestions on what the problem is?
+maxx patrol yes sir. I always use 35. I just like them better, 40s are too hard imo altho i know some guys that do fine with them. 4tec is a light car
sure it did, prove a slash 2wd went 130... lower kv highwer voltage is a better setup than high kv low voltage. thats why heavy 1/8 vehicles run 2200kv and lower
hit up vgad at sagacustomrc.com and get the chassis first. u can go aluminum or carbon. carbon of course is $$$. then all you need is a motor and ESC. I use steve neu motor ($$) and castme MM2 ESC combo on this car.
hey has any one ever owned a tppower motor I'd really like to know more on them. a guy up at my hobby shop had his car Going 140 on a 100$ tppower motor
Amazing run bro, your knocking on 150, Congratulations on that great pass. keep killin those numbers.
thanks big dog
Yo dude congrats! That was a sick run! Can't wait to see you go faster!
thx!
Fantastic build.
NICE run on 6s. Congrats on the 139mph
Thanks Donald!
Awesome pass Mr Paulie nice smooth... Congrats on the 139 bro..
thank you sir Rocbud!
ok thank man I really appreciate the help. I will definitely give you props when I start my vids
+maxx patrol np dude, anytime! Thx!
PaulyG RC where do you get all your RC stuff.
very nice, good choice on body too. it's cool it still looks like a car!
+firefoxussr31 thx man!
My dude Pauly G putting down some numbers. Nice pass.
thx brotha
very nice run and slick looking 4tec. gotta get mine back out
+Street Dreamz thx man! You need to!!
damn brother G those are some hell of the numbers you was Rockin and Rollin bro no damn doubt about that shit I think it's got more in it man I really do to me it didn't seem like you was full speed and you are hanging out with one of my favorite Bros brother Turner hell of a good friend congratulations brother
Thanks Roy! Ya, Tuner is a great guy (most of the time), lol! kidding. thx for watching!
Hahahaha That Was Funny Bro Welcome Man
Very nice!
thx bay bay lol
Congratulations my brotha! Nice numbers
Thanks Rook! My brotha from anotha motha!
Very nice!!!!
thx my man thunder!
nice job..I just saw Mr tuner do 136 on his slash
yeah, his slash was movinggggggg!
Nice run on the 4tec
+udluuz thx
Awesome pass and numbers bro.....2 👍's up.
thx man!
no I'm not using tough racing belts but took it apart last night and all the teeth on the rear belt are gone not sure what's going on so I put another one on alittle tighter, will see what happens today.
+maxx patrol lol, that'll do it! Worn out teeth it'll loosen
sweet, nice pass
+saga customrc (vgad23) thx Vgad! Your carbon kit! Solid and light 👍🏽👍🏽
congratulations bro awesome run
thx man, you been lost!
Huh ?
thought you hadnt posted a vid in awhile but was confused with someone else, my bad, lol!
insane speeds man good job
+Andrew Thompson thx dude!! Gonna be attempting 145 in 2wks, check back!
Congrats brother!!
thank you sir!
One Luv!
thx
rollin bby ,nice run!
+mumforddale1 thx man she was
Laying it down 👍👍👊
lol, thx Lopez!
Nice pass
thx man
+PaulyG “PaulyG” RC np. Im trying to get my hands on a 4 tec right now.
That Bz is movin
she was...she was well behaved that day.
AWESOME RUN DUDE!!!!
thx b
nice run pauly!
Thx Phil
ALWAYS TURN ON YOUR RADIO FIRST!!! That's the problem you're having. If the car decides to take off you have no way of controlling it!!! So always turn on your radio first!!!
thx for the advice :)
sweet run man, just finished my Saga 4tec build and having a problem with it spinning out, I'm running a 2200castle with 36s and 29p any advice?
+maxx patrol you drag racing?
+maxx patrol ok, try 34/30, closing that gap will give u more top end less off the line. You need a long road. Then go 34/32 on 6s you'll be up in the 120s
Ok thanks...do you know the actual name of it...i really like that body ?
+Kelvin Washington it's been awhile, I'll check
Did you do that without anything used for stabilization? And are those contact foams?
nice pass! 👍
thx CowboY!
Are u using contact form tires?
I want to know which is better, foam or the rubber one's?
No, they are exceed foams 35s.
That's insane speed bro.
Awesome stuff
thx Oz!
Sweet pass
thx man
nice pass!
thx man
Hi sorry to bother you on here but can you tell me where you got your tires for your traxxas 4tec 2.0 .....Thanks Jim
Never a bother dude. It’s been years so took me a bit to track down. They are Xceed RC ITA Wide Front Tire-Rim (Carbon Black) (35 Shore)
@@PaulyGRC-PG Thanks man there out of stock every place I try people must buy them like candy ...LOL Thanks for your help
Ya that happens. Contact them directly and keep looking. Amazon, Ebay, etc. when you find them, buy more then one set.
@@PaulyGRC-PG O I will I'll hoard them like people did with toilet paper .......LOL
hey man, I have my 4tec setup the way you said but I'm having a problem with my rear belt keeps coming loose after a run or two. any suggestions on what the problem is?
+maxx patrol loose?! Weird. Are u using tough racing belts?
also I'm running 40shore foams, should I go a little softer like 35shore?
+maxx patrol yes sir. I always use 35. I just like them better, 40s are too hard imo altho i know some guys that do fine with them. 4tec is a light car
damn champ nice pull
Thx Cliff
Nice run bro!
thx man!
what made you decide to change the factory look of it to a car ,just wondering
Tough making it hit 130+ on stock parts. I also like customizing
pan car bodies create more downforce
GMAN exactly! Keeping that car down
That so next rc car
nice pass where you get the boby from
thx Watch Dogg! Its a McCallister
my slash 2wd mamba 7700 esp moster 3s 3s 3s 3s 3s max amp 4400 150c 130mph no need 6s an motor mamba moster 2200kv for 130 mph
+Jose Jimenez nice thx for watchn!
sure it did, prove a slash 2wd went 130... lower kv highwer voltage is a better setup than high kv low voltage. thats why heavy 1/8 vehicles run 2200kv and lower
insane!
what body is that you have on the 4tec conversion??
+Kelvin Washington mccalister body.
What do you have for a set up momba monster ?
nice
thx homey
bro ,does brushless motor system driving that rc?
Hey Pauly love the set up bro. Can you email me the set up I'd like to do one just like this
hit up vgad at sagacustomrc.com and get the chassis first. u can go aluminum or carbon. carbon of course is $$$. then all you need is a motor and ESC. I use steve neu motor ($$) and castme MM2 ESC combo on this car.
PaulyG RC , which model/kv Steve Neu?
Can someone tell me what that metal piece going along the inside of the car is!?
+Slothesine what metal are you referring to? The only metal on there is the motor mount, everything else is carbon.
PaulyG RC yea that carbon
PaulyG RC in the middle
+Slothesine that stops the car from flexing, makes it stiff.
PaulyG RC what is that part called?
She's flyin dude!
indeed...zoom zoom
what body is that? nice run
+stickaman mccalister thx man
hey has any one ever owned a tppower motor I'd really like to know more on them. a guy up at my hobby shop had his car Going 140 on a 100$ tppower motor
+Bull shit stuff yes sir. Some of the top speed guys are using them.
and if a motor has a max burst of 300amps does you escape have to be a 300 amp or higher esc
sorry esc
It’s fun to flex to little kids with rc cars! A bit unrelated to this video tho.
Lol
Want one
What tires you running
That's moving
ya man, crazy!!
can you link me the mods for it i just want the body and the moter and vxl system
What's your gearing ?
nice number
thx man!
What GPS is that?
where you buy this
how much does she weigh
I think around 6lbs.
how is this a 4tec?
Do u have an engineering background?
No sir
Wow!! That is incredible looking car.
Nice pass bruh
thanks brotha! Hows Germany treating you?
+PaulyG “PaulyG” RC I'm currently deployed right now. I'll be back in a few months, then I'll be back at the RC game.
+saleenstang13 oh, becareful out there man, thx for serving and doing what u do, up most respect!!
+PaulyG “PaulyG” RC no problem bruh, you guys keep doing your thing out there.
Kph?
223kph
OK is that even a 4tec anymore?
same chassis. Just in carbon fiber.
all fastest car have brushless motor blevie me
+ebrahim alsadoon yes sir
ebrahim alsadoon your right but you seem like you don't know shit about it at all
no speed runs
sc