F30 BMW Carbon Fiber Mirror Caps DIY Install
Вставка
- Опубліковано 4 лют 2022
- I install carbon fiber mirror covers on my 2018 BMW 340i. The install was quick and easy. The only required tool is a trim removal tool, which does come with the product. I also used a microfiber towel to hold the mirror when dangling.
Carbon Fiber Mirror Cover - geni.us/QsGzk
Trim Removal Tools - geni.us/1wJSRP0
Microfiber Towels - geni.us/Yd1EbAB
Instagram 📸 ~ @nw.auto
#F30 #340i #F30Mods
Support the channel at no extra cost by purchasing products below. I earn a commission to create more content you enjoy.
ACCESSORIES:
BMW Travel Mug: geni.us/jRsb6ES
INTERIOR UPGRADES 🏎️:
Ambient Lighting - geni.us/En9tDW
Carbon Fiber Handbrake Cover - geni.us/C8Sr8n
Sport Pedal Covers - geni.us/RZrG
Sequential Turn Signals - geni.us/ei8lqId
ENET Cable - geni.us/JsU3w0
Trim Removal Tools - geni.us/bWv3
EXTERIOR UPGRADES 🏎️:
Black BMW Center Caps/Emblems - geni.us/BxYATl
Kidney Grill - geni.us/igNS
Carbon Fiber License Plate Frames - geni.us/BGKeciv
License Plate Screws - geni.us/v9TIAV
Plasti Dip - geni.us/hQgW59x
CLEANING SUPPLIES 🏎️:
Portable Vacuum - geni.us/IYLMUBk
Wheel Brush - geni.us/QmA5sB
Microfiber Towels - geni.us/NAfQC
Microfiber Brush/Mop - geni.us/dCRmt
Car Wash Bucket - geni.us/JYbv
Interior Air Vent Cleaner - geni.us/l5gc
CLEANING SOLUTIONS 🏎️:
Leather Cleaning + Conditioning Kit - geni.us/iykok
Wash & Wax - geni.us/B0OPxd
Tire Shine - geni.us/u38zMq
Wheel Cleaner - geni.us/VIgOV
Odor Eliminator - geni.us/9y0RsS
Ceramic Coating Spray - geni.us/xI5deHL
Water Spot Remover - geni.us/3BVOE
IronX Iron Deposit Remover - geni.us/qOgbLnX
Little Trees Car Scent - geni.us/Tvhg6g
MAINTENANCE 🛠️:
Air Filter Cleaning + Oiling - geni.us/ThWtF
Jack Stands - geni.us/3SVjYAW
Low Profile Jack - geni.us/FKQZH9m
Creeper - geni.us/NVLdK
ELECTRONICS:
Dragy Performance Meter - geni.us/EMtoww
Uniden R7 Radar Detector - geni.us/C09P
Uniden R3 Radar Detector - geni.us/1dHOO
Uniden R3 Mirror Mounting Kit - geni.us/mNqAi
Veepeak OBD Bluetooth Device - geni.us/03zVUdZ
CAMERA GEAR 📷:
GoPro Hero 8 Black - geni.us/ChJs
Smatree Tripod - geni.us/Ky0j
GoPro Charger - geni.us/BKmXPe
GoPro Batteries - geni.us/vUlXsy0
128gb MicroSD - geni.us/XBGncAV
POV GoPro Head Mount - geni.us/p9BM9Bj
Suction Cup Mount - geni.us/MQunb - Авто та транспорт
Many comments are saying to pull the OEM cover off without removing the mirror at all. You can try this way instead if you are worried about damaging the mirror
you don't even have to go through the mirror just pop the cap out with the tools lol
Dude gave me the bright idea and I crack my mirror
@@ArgoNation33same
You made that look extremely easy. I broke 2 mirrors. But I believe it was because they were old and the plastic got brittle
The actual mirror cracked when you were pulling on it? I've had to remove my mirrors before and the clips always popped out when I started from the bottom and worked my way up
The whole glass shattered
I followed kies motorsports tutorial and I still cracked it. When I worked at the bmw dealership, the techs taught me to put tape over the mirror and it should prevent it from cracking but mine still broke the second time
@@cuttthroatperformance2752 yeah thats weird. Maybe it had something to do with the plastic clips. I never had trouble popping it in and out
@@NWAuto I should of posted it on my channel lol
You can do that for the left side. If you do this to right side, you’re gonna broke it. I broke mine But I was able to open it from the back with a simple net
I just got done doing mines and I'm making a video for it because after watching your video. I noticed that there was a couple of different things when it comes to my BMW again my is a 2022 BMW M440i in XDrive. Even though it looks so similar but there's a few things when I opened her up like with your clips you had three circled when I open minds up it was only two clips holding it and then on the left side of it there's like little clips holding it I'm making a video of it right now I'll post it as soon as I'm done
Yeah I did this on my friends M340i. Its different on those cars
God going through this because your replacing a whole mirror assembly vs upgrading is a whole different feeling lmao 😂
on my f22 I just tilted the mirror down and used chopsticks to gently pop the clips 👍👍👍
ill try that thanks
On my F22, I just pried the mirror out, then did the other one, then learned how expensive auto-dimming, heated mirrors are when I realized I cracked one :(
Not the way I anticipated this Saturday going...
Oh, and the caps (at least for me) make a very loud and annoying whistling sound once you reach about 20mph. Just increase in pitch the faster you go. I think I can fix it with a little strip of electrical tape. We'll see.
On the bright side, I do have a new (to me) F22 that I am thoroughly enjoying over my last 48 hours with it :)
Gently he says!...he used it like a crowbar trying to lever a stuck door lol! 🤣
Hahahahaha true😂
Any additional wind noise at the windows when driving after install? I have read there is a noticeable difference.
I didn't notice much of a difference. Maybe there is more and I just don't realize it. But there definitely wasn't enough to bother me. I went for a drive earlier and noticed more road noise than wind noise. But luckily this mod is very easily reversible if you don't like it
As for me, I did feel that after installed, specially as long as go over 100km/h but depends on if u really care bout it anyway with Music and other road noise probably u can ignore it. But I’m wondering that does the M3 one is special design or shape so that won’t make noise? Cuz m3 come with when it was brand new lol maybe m3 engine and exhausted sounds already cover all it over 😂
i haven’t heard any wind noise at all after doing this. and i’ve been going over 200km/h
Bro I’m legit scared. All the tutorials i see on youtube to remove the covers says to remove mirrors first then cover. While everyone in comments saying they aint need to remove mirrors or they saying they cracked the mirrors removing or putting it back. I dont want to break the mirrors but not single video on youtube shows removing cover without removing mirros first!!! Mad confused at this stage.
Try pulling the mirror cap off without removing the mirror. People are telling me they have been able to do the install without touching the mirror
same did you ever do it
Can it close or will it scrape?
closes without any issues
Been awhile since you’ve uploaded. Are you okay? Just been busy?
Yeah everything is cool. I just needed a break. I've been more consistent on IG than UA-cam. Even really short videos like this one take a lot of time and effort to create. But from now on I'd like to do at least two videos a month. Maybe add some casual vlog style videos too
I listened and broke my glass 😭
Dam sorry to hear. The important part is to make sure it doesn't flex at all, and do it slowly
If gonna listen these obviously you're lol
What were those rims?
Verde Axis V99
You dont need to remove the mirror
How do you pop the clips out and make sure the new one are all the way in?
@@NWAuto use a trim tool and gently pull it off
you made this look easy i cant even get the mirror out
Some people are saying they did it without removing the mirror at all. They just popped the back cover off. I never did that but you can try it
Didn’t take mirrors off, just used credit card to pop off old caps....but the clips can break. Try reviewing the new 2.3 maps! People are up in air about them.
Yeah I'm running the new map that gave people traction issues, but I haven't had any issues with traction. Maybe because I'm xDrive and have good tires
Great instructions, thanks! That fake carbon is a no tho 👎🏼
I didn't mind the look. What did you go with?
I’ve gone through 2 fake carbon fibers caps- I live in Florida and they get sun faded after one year if u r lucky! I’d def recommend real carbon fiber ☺️ wish I had known this prior bc I also had to replace 2 mirrors 😮 even having my mechanic do one for me 😮
@@Patriotgirl1130 Yeah I guess it depends where you live. We don't get much sunshine here
i broke it..
carbon look, they look like printed
Yeah these are printed. But they are holding up fine
Nonsense you are definitely going to break glass if you do this way theres others way just take cover off it self by one side...
NEVER DO THIS ! Taking aut the plastic part is the only way not miror
Useless tutoriel , you dont’ have to remove the glass.
How do u do it without removing mirror
@@joelbomb1pull the cover