Dewalt Workbench DXST3000WB Assembly
Вставка
- Опубліковано 5 лют 2022
- Amazon link for purchase of Work bench and others
amzn.to/3AZlxQx
Dewalt Caster Stool
amzn.to/3se1QAy
Dewalt Padded Shop Stool
amzn.to/3gjTvFQ
amzn.to/3D1CMQo
Dewalt 6x2 Shelf Unit Extension
amzn.to/3GVAXaG
dewalt 4ft shelving unit composite shelf
amzn.to/3E4Vt7s
dewalt 4ft steel rack
amzn.to/3rdwICk
Dewalt peg board for 6ft shelf
amzn.to/3p516vT
Dewalt cord minders
amzn.to/3lggDYy
Dewalt Storage drawer for 4ft shelf
amzn.to/3CV3hHv
Dewalt 4ft black storage shelf unit
amzn.to/3nZo6wW
Dewalt GFCI Power station
amzn.to/3liNDj1
Dewalt 3 piece cantilever wall mount
amzn.to/3fQufa8
Dewalt 6 inch 2 piece cantilever
amzn.to/3tR64jS
Dewalt Tripod
amzn.to/3s9DAzE - Навчання та стиль
Bro, you deserve a medal, Dewalt should be ashamed of themselves with these directions.
Lol thanks, I'm glad the video helped out I know what a pain it is with these!lol Thank you for watching!👍😊
The directions stink!! I watched this video instead…done..
Yes, very well done, thank you thank you and again, thanks! Dewalts "instructions" only made sense after I watched your video. Appreciated.
Awesome! thank you I'm glad it helped you out! Have a great summer and thank you for watching!😊
Thank you for your help! I bought this for my boyfriend as a gift and the instructions were horrible! You helped us save a ton of time!
That's awesome! I'm glad it helped!!! He better marry you with gifts like that lol!Thank you for watching!👍😊
Thanks for the walk through. I had better luck bolting the drawer slides on the bench first then sliding the drawer right in. Piece of cake assembly and a very sturdy bench.
Awesome thanks for watching!
Thank you! This was such a great video that saved a lot of time and frustration in putting the workbench together. So much better than the instruction manual!
That's awesome to hear! Thank you so much and thank you for watching!👍😊
I just put up the same shelve today and man thank you so much for making your video, it was a life saver.
That's great to hear! I'm glad it helped! Thank you for watching!👍😊
I just bought one of these tonight. This will be a huge time-saver for me. Thanks for posting this!!
Awesome! So glad it helped and thank you for watching!!!👍😁
Doesn't look hard, but being inexperienced it's reassuring to see that it actually is easy. Plus during your assembly we get an idea of it's build quality. Thanks!
Honestly it's not bad you got it!👍 And yes definitely heavy duty powder coated steel definitely built well! Thank you for watching and good luck!👍😊
Thank you so much. It would have a lot harder and longer just using the Dewalt instruction. Printing was just too small for one thing. You really helped me.
That's so great to hear!!! Thank you and thanks for watching!👍😊
Thanks for that video, I could not be bother taking a magnifient glasses to only be able to read and understand their instructions...
Awesome!!! Thank you and thank you for watching!👍😊
Thank you ! This was an amazing time saver for me, really appreciate you posting this video. All the best !
Awesome! Thank You and thank you for watching!👍😊
Excellent video, would of been days getting it set up without your help! Much appreciated.
Wow thank you so much and thank you for watching!😊
Awesome video! There’s no way I could have followed the instructions the way Dewalt wrote them. Nice job
Awesome! Thank you that's great to hear and thank you for watching!👍😊
Thank you. I picked up one today. I am Now thinking of getting a second one. I am going to put the 2nd drawer under the 1st drawer. and the 2nd peg board on the side. Thank you very much for the walk through instructions. really appreciated the video/help. I was surprised that there were 13 of them at my HD $199.00 USD each.
That's awesome! I'm glad you were able to find them at a decent price not the price gouging you see on Amazon that's why I tell people to check there local homedepot! Thank you for watching!👍😁
Thanks for the video. This sure is a lot better that looking at those small ass directions that come with the bench
😂 awesome! I'm glad I could help out, and thank you for watching!👍👍😁
They’re HORRIBLE. My husband told me to do it, because I assemble everything. These are easily the worst instructions I’ve ever see and I once had to assemble a shel with the wrong instructions and some extra pieces😂
Yes I totally agree if you watched my first video where my wife and I put together the 6 foot shelving unit we forgot the plastic pieces and it did take a while 😂 but we eventually got it and it was easier as we did all the 4 footers because it's the same to assemble and we did so many lol I feel your pain lol thank you for watching!👍👍👍😁
Agreed
Thank you and thank you for watching!👍😊
Just bought one the instructions are horrible came across this video and it made putting it together very easy Thank You
Thank you so much! I'm glad it was able to help you out! I did a bunch of videos on all the shelving units and accessories if you get any of the other ones, hopefully they can help you out too! Thank you for watching!👍😁
I have pretty good vision, but these size 3 font instructions are insanely small. Thanks for the vid.
Awesome! I'm glad it helped! Thanks for watching!👍😊
THANK YOU FOR THIS VIDEO. I ASSEMBLED IN UNDER AN HOUR 😅
Wow awesome! Thank you and thank you for watching!👍😊
Thanx for the video. I just bought one today (super deal for $200 if your local store has any!) and saw the instructions and went HUH lol. I was hoping to use it for my 3d printer but a little worried about the thin top on it. We shall see.....
That's awesome! They are built tough with the supports in the shelving unit you wont have to worry about the shelfs, I stand on mine to get stuff off my wall lol
Thank you for watching!👍😁
Thanks that was helpful. My workbench top is gagged tho. Gap on top right and bottom left.
Go back through and make sure all the shelving is hammered in good and on a level surface! If it is on unlevel ground or the shelves are not in all the way it will cause a gap!
Thank you :) @@WhitehouseFarmVet
Anytime!😉😊
awesome super helpful video! Thank you sir!
Thank you and thank you for watching!
The drawer bolts/nuts don't screw far enough to hold the drawer walls up tight. There are:
2x (11)/(12) that worked, but only 2 of those and not 4 for all 4 corners.
4x (23)/(24) but the nuts have restrictors that don't allow them to tighten past a certain point.
I'm sure I'll figure out what I'm doing wrong, but maybe I can come back and post the solution for someone else. Conversely, it's possible they shipped those in the reverse quantities by accident.
I was just being too DAINTY. Reef on them with that little wrench, they'll be fine. Nice and snug.
I'm glad you figured it out! That little wrench stinks anyways! Lol
You are really good
Awesome thank you so much and thank you for watching!
Thanks!
Thank you! Your the best!😉☺️👍
thank you
Thank you for watching!👍😊
Great video thanks! The instructions where upsetting
Thank you I'm glad the video helped and thank you for watching!👍😊
Awesome video! Very helpful but I wanted to ask is there a good way and easy way to put a vice on the table? The main table looks quite thin and flimsy. Am thinking just a portable vice with a locking bar instead of the big fixed bolts.
I wouldn't recommend a vice the table would probably brake ,I don't think they are meant for anything more than stacking!👍
Thanx , Great Video - Home Depot has these locally for $199 - Was hoping to see this set up , but only boxes - Could you add four caster wheels for moveability ? Thanx Scott
Thank you! Yeah unfortunately unlike the dewalt caster chairs in my other video the shelving units dont have the steel base in the footings they are hollow with plastic base caps ,although I'm tempted to weld some in once I cement😂 Thank you for watching!👍😁
I like this one compared to the max tool one. I like the height on this. Do you recommend it? How is it holding up?
I have 6 of them now!😂 and yes they are great and you can stack them or connect multiple together to fit your needs, no complaints on my end other than i wish they were cheaper!😉
How much of a gap is there between the drawer and the top? I work in a fab shop and wanted to get this but its a pretty dusty enviorment wondering if the dust would easily get into the drawer.
It's very minimal and I haven had to clean mine out, but I also don't work in a fab shop, if it's that dusty you probably want something more sealing! Good luck and thank you for watching!👍
Thanks for the video, very informative! Only thing, I don't see in the video where the side mounting brackets go (#27 right (x2) and #28 left (x2)). Can you help me on this? THANKS!
I think what your asking me is about the side mounting for the peg board mounts? If so go to 19:45 in the video! If it's something else let me know and thank you for watching!👍😊
@@WhitehouseFarmVetThanks !
@THERUBIKTUBE anytime make sure to check out all our other videos we have a bunch of diy and farm animals too lol thanks again for watching!😉😊
One question on the drawer install - wouldn't it be easier to install the outside rails into the uprights first, then just push the drawer into the rails?
(I'm probably tackling this the next day or two)
Great comment! I'm sure as long as its lined up even with the rails it would work! I would probably definitely do the drawer first by itself with the 2 sides and no rails until the drawer is connected to both side rails and even then put the side rails on, just make sure you have your drawer at the level you want it because it can be a pain to take it all apart to move it. Let me know how you make out I'm really interested on if it is easier! Thank you for watching and good luck!👍👍👍👍👍
@@WhitehouseFarmVet finally did it today - I think it might have been slightly easier to push the drawer into the slides while in the rack, but only slightly. I'd say it's basically a wash 😁👍
Lol well it was worth a try ! I'm glad you got it done and once again thanks for watching!👍😊
I’m frustrated I can’t just walk into Home Depot and buy this stuff in the store
Totally agree I haven't seen it sold in about 8 months , I think the only way now is to order it online through home depot or pay crazy prices on Amazon, I wish you luck and thank you for watching!👍
side note my parts were also mislabeled (left vs right)
If it wasn't confusing enough! 😖 Thank you for watching!👍😊
Knock knock can I borrow your dewalt I will bring it right back
😂😊 Thank you for watching!👍
Not enough yellow and black in there.
😂😂 I tell my wife that all the time! Luckily she cant tell what's new!!! 😂😂 thank you for watching!👍😊
200$ at home depot if you can find them.. Sold out around me.
Yup same thing haven't seen any since beginning of January, thanks for watching!👍
Huge thanks for this. The instructions that come with it are horrible
Awesome!!! Thank you so much and thank you for watching!👍👍👍👍👍😊
Hope you're getting royalties from Dewalt ..instructions are useless..especially if you don't have a magnifying glass to read them😜.
Thanks for making install easy.
Lol I wish! I'm glad I could help, thank you for watching!👍😊
I am watching this video right now while putting this together. I'm sure I'd have lost my mind with this video as, well, you know, those God awful directions.
Hahahhaha yes I do! Lol Awesome I'm glad it can help! Thank you for watching if you need any help I'm here for you just shoot me a message and good luck!👍👍👍👍👍😁
Thank you for the great instructions on setting this up. Dewalt instructions are complete junk.
Thank you I appreciate that! And thank you for watching!👍😁
Thanks the instructions they give you suck
😂🤣😂🤣 Yup that's why I made the video I'm glad it helped! Thank you for watching!👍
You’re running out of room.
Lol I know!!! Time to build a bigger garage 😂😂😂👍
Just built the 4 foot shelf but cant get it to sit level. Wobbles pretty bad. Ended up just having to use pads under one of the legs.
Go back through all you connections and use the rubber mallet to wack them down good then put your safety pins back in, you should notice a difference! Good luck and let me know! Thank you for watching!
@@WhitehouseFarmVet cool thanks ill give that a try
Good luck 👍