How To Fix Blinking Ninja Power Light
Вставка
- Опубліковано 30 бер 2015
- This video will show you how to fix a blinking power light issue on your Ninja Blender.
There are a few things to look for if your Ninja blender stops working and the power light is blinking.
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission based when products are purchased from them. - Навчання та стиль
Thanks you for helping me fix my smoothie problem! I could not for the life of me figure it out. My arrows weren't lined up. You came in clutch today 🌸
Thank you for the tip! It is greatly appreciated!
Arrows weren't lined up on the lid, thanks!
You're welcome
Mary Albright same!
Same
Same
Thank you!
Wow, 7 years later and this video is still helpful! Short and to the point. Loved that. Thanks!
Glad it helped!
Thanks. I tried yelling at mine but it didn't work. Also I like how you say "blenda'h."
😂😂😂😂 me too
powah light on ya blendah
lol
My children and my husband thank you. I just placed the butter, eggs, etc. in the blender and got the blinking light. Our regular hand mixer officially died last week so we were a little concerned. Thanks for saving our day!
Glad this helped you out.
omg that was hard to know the 2 arrows gotta face each other, thanks so much ;)
Eagle Girl , I wss almost throwing it away.
Glad this helped you out.
Thank you 8 years later wife was ready to toss it,but I looked on you tube and seen your story and it worked, the white lines were not lined up,thanks
Glad this video helped you out.
Glad I found this video. I had not used my blender in a while because it had been in storage. First time I decided to use it, it would not power on, just had the red light flashing. This video helped me realize I had the arrows on the lid out of line. Simple fix....thank you so much.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Thank you! Arrows weren't lined up!
Thank you bunches. I rarely use my blender, and when I attempted to do so today the power light was blinking. your second suggestion did the trick. I actually had the wrong lid on 😫. Your video is straight forward and to the point, really easy to follow
i just had the same issue tonight !!! i spent a while trying to understand.. this video was a lifesaver ;-)
Glad this helped you out.
Wow! My mom will be so happy to know her blender isn't broken! Lol Thank you so much!
+Vane.G you're welcome, glad this helped you out
Using someone else's Ninja blender for the first time. Lid wasn't lined up and was about to drive myself crazy trying to figure out what the hell's going on till I did a quick google search and found your video. Solved in 30 seconds. Thanks!!!
Another blender saved!
Thank you! Blender was given to me by a friend. Couldn’t get it to work until I found your video!
Glad I could help!
it is still blinking red and I tried everything you said
Glad this helped you out
Seriously?!!!
Search toothpick fixes ninja blender.
Thanks so much now my ninja blender is working I sub hit that like and hit the bell
OMGeeeee! I'm thinking for about a month now, Fingerhut sold me a bad blender. I called customer service and they mention trouble shooting for blender.....I hung up and goggled instead, after becoming frustrated! Here you are with something so simple*.* Feeling like a silly Rabbit! Thank you sOoooo Much!
Another blendah saved...lol
You're the greatest. Someone gave me the blender. No instructions came with it. Nothing matched up. Once I matched up the arrows, the power light came on solid and it worked. Thank you, Thank you, Thank you.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
THIS WAS AMAZING THANK YOUUUUUUUU
You're welcome
Remember to subscribe to our channel to receive all of our coolest updates!
I was getting ready to throw it away thank you I thought it was broken
@@roba168 yyh v czar s20
Thank you for making this video, my blender is now working 😅
You saved my whole day I was about to go buy a new Ninja blender, but something told me to look on UA-cam to see if I could find a way fix it and there it was. Thank you so much for your advice.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
OMG I feel so dumb after watching this video! Lol thank you for this!!! Haha!
+Valeriaa' Saraii That's ok. I scratched me head first time it happened to me...lol
What about the single serve cup?
single serve will only work with the single serve button
Thanks for watching
Thank you for uploaded the video. I just brought this Ninja blender home from Macy's, and the power button went flashing. I was confused and thought they sold me a refurbish merchandise. Didn't know what to do and thought of taking it back. I'm glad i found your video.
Glad this helped you out.
After 10 years of thinking the blender was broken I found this video today and you helped now I feel dumb thank you so much
Glad this helped you out
It's not working I did everything
Khadija Abdalla yeah I'm in the same boat as you I've done everything and it still blinking
Khadija Abdalla is the blades on the blender fully tightened?
It's the safety pin feature. (Unless it's not lighting up at all.) The pin is at the right/front where the arrows are. The lid has to push this pin down. I read the manual, lol.
Sorry just noticed this comment
Bless you!!! Forgot these details after not using the blender for 3 years!!! Solved my problem!!! I was ready to pull it apart!
Glad this video helped you out.
7 years later u just saved me $100+ mate. Thanks you
Glad this helped you out
Ok, so I've had my 1500 watt Ninja for 13 months now. Until now, I've never used the largest pitcher. That's when the power light started blinking. At first I though I had a lemon on my hands so I decided to Google for troubleshooting ideas. Sure enough, once I attached the lid I discovered the 2 arrows didn't match up. Problem solved. Huge thank you. YOu save d the day. I super love my Ninja…the mega 1500 watt. This appliance is the bomb!!!
+yourthoughtamazesme We love ours too. We own two, one for the house and one for our seasonal camper..lol
Just like with others who commented, arrows weren't lined up correctly. Thank you so much for the video. I'm always troubleshooting through UA-cam. My son thought for a second there he wasn't going to get his milkshake he so patiently waited for. Thank you so much for the video. 🤘🏼
Glad it helped!
Thxs! I picked up this very blender off of the sidewalk. Took it home, it didn't work. But I'm thinking I would be able to maybe fix it. Naturally I search YT - saw your post and guess what... It works. I'm suped up!
Ha...That’s awesome. The other person probably thinks that it was broken
We decided to throw our blender in the trash. My son dumped it. A few minutes later, I thought that maybe there's a "how to fix blenders" on youtube, and that's when I found your video. I retrieved the blender from our trash; I lined up the arrows on the lid, and it worked! Thank you so much for posting this video!
+Daniel Santos glad our video saved yah! Thanks for watching
Thank you so much! Using first time, I couldn’t figure out why the lights on my food processor wouldn’t stop flashing. Didn’t know the arrows had to be aligned. God bless you millions.
Glad it helped!
Lol I just bought one off OfferUp and the light was blinking they didn’t secure the blender in the right place. You helped me fix it. Thank you you just saved me from catching a case for real. 🙇🏻 🙇🏻 🙇🏻
Glad I could help!
Thank you so much! Found a Ninja 1500 Watt Professional Blender at a Goodwill. It wasn't working at the store but I decided to take a chance. I didn't have the arrows lined up and now it works perfectly. Appreciate the help!
Glad I could help!
Thank you. I am staying at someone's house and this blender was unfamiliar to me. I did not have the arrows lined up on the lid until you suggested that could be a problem. All is good now. Thanks very much.
Happy to hear this helped yah
OMG you HAVE saved my life !!! 😍😍😍🙌🏼🙌🏼🙌🏼 I bought a Ninja and today was my first time using it and the power was blinking and I didn’t know what to do. After 10 mns I thought about UA-cam and then 4 my own good ur video called my attention. Because of you I know how to use my Ninja 😍🙌🏼🙌🏼🙌🏼🙌🏼 THANK YOU !!!!
Glad this helped you out.
Cooking thanksgiving dinner and I almost freaked out! You saved my white bean dip!!!!! Thank You :)
+Malarie Raquel That's awesome...lol Happy Thanksgiving!
Thanks so much! I was loosing it until I found your video. Peace & Blessings! 🌺
You are welcome!
Thank you so much... after trying many things and almost giving up on my ninja... 1 minute into your video... you solved my problem... thanks lots! 👍🙏
Thanks for watching. Glad this has helped you out.
I had the Ninja professional1500 sitting in my garage collecting dust for 2 years because when i bought it it stayed stuck on the blinking red light. I found it today while cleaning and decided to give it one last try before donating it. Thanks to this video i got it working lol. Pretty much brand new, couldn't return it because i had lost the receipt.
Glad this helped you out
Dude. Thank you SOOOOO much. Lol My cousin gave me one of these and I thought it was broken. Followed all your instructions and the power light just came on. Lol You rock. Thank you! 😘
No problem at all...Glad we saved another blendah!...lol
I searched for this feeling ridiculous! Thank you SO much, I was going insane! You helped keep my neighbors from calling nice men with butterfly nets, lol.
Glad this helped you out.
Videos like this make me love UA-cam so much. Thank you.
Thanks for watching
Thank you so much. I haven't used the blender for awhile, so I couldn't figure out what the heck was wrong with it and why it wouldn't work. Well, because I watched your instructions, I realized that the arrows weren't lined up. DUH!! Now it works just fine! Again, thank you!!
Thanks for watching. Don't forget to sub the channel to for more videos like this!
I managed to be one of those people who can’t read arrows…thank you so much…I just got this and was upset that it didn’t work…you fixed it for me🎉😅
Glad this helped you out.
Thanks! I was totally being dramatic & saying how “the devil is out to get me & if it’s one thing it’s another”🙄 found your video & the locks weren’t lined up 😅😅 thanks!!!!
Thanks for watching
Thanks, man. We didn’t have cover attached properly. You saved our smoothies.
Glad this helped you out.
Thank you so much for this video!! I was very discouraged that I couldn't get my blender to work and after watching your video it's working perfectly! 🤪😁😁
Glad I could help!
God sent! my father and bf had difficulty getting it to work and your video solved the issue!!
Glad this helped you out.
wow .. thank you very much for helping me understand and resolve the blinking drama .. I actually had the wrong lid on and the power light was blinking forever and your second suggestion did the trick ;-) I appreciate your video ..
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
I can't believe I couldn't figure out that the arrows on the food processor attachment had to be aligned! I feel so silly. Thank you for the video. I tried watching the video Ninja made and yours was way more helpful!
Glad I could help!
Thanks man. 🙂 7 years later still a useful video ✌🏻
Glad it helped!
Thank you so much I bought a ninja blender from the salvation Army and I have no clue to what I was doing didn’t come with instructions I looked this up why my red light was on power light was blinking found your video did exactly what you say sir that came right on I’m so happy thank you cause I was about to take it back! I really appreciate this! That’s why these videos really help someone that I have no clue what the hell they’re doing LOL I just became a subscriber of yours because of this video! Thank you again blessings to you and your family!!
Glad this helped you out
It worked! Starter guide doesn't even mention this. Thanks.
Glad it helped!
Thanks so much. I was freaking out. Didn't have the top on properly. You're a rockstar!
Glad this helped you out.
Thank you so much for this video. My blender was racking my brain for the longest. It's fixed now. 🙌🏿
Thanks for watching. Don't forget to sub the channel to for more videos like this!
Thanks you for the tips, I was ready to throw it away ... and hated that I purchased it via offer up. Felt scammed and your tips gave me faith again to buying online.
Glad this helped you out.
Thank you so much.
My arrows weren't lined up on the blender and I never would have thought of that. Thank you once again.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Thank you so much for this we had this blender for 2 years and was wondering what was wrong... Thank you for the assist.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Thank you so much for the video. I almost discard my Ninja blender after the blinking light kept coming on and wasn’t blending. I just aligned the top arrows and the power light stop and it works perfectly.
Glad it helped!
Ahhh I was about to throw this out before I saw this and fixed it! Thank god you made this video!!!! Your a lifesaver!!!!!!
Glad this helped you out.
Great video…short and sweet and got me out of a situation where I was stuck…thanks buddy…
Glad it helped
This video saved me alot of money. I was about to purchase a new Ninja Pro. Thank you soooooo very much.💜👍🏾👍🏾💯
Glad I could help!
You saved me from a very depressing day. Thank you🙏🏾
Glad this helped you out.
OMG Thanks for the video! I misplaced the booklet and wanted to try it out! The power light was flashing *It was the arrow on the lid/handle* This blender is awesome!
+MissLove26 you're welcome, glad this helped you out
Thank you so much. I was about to be late to work because of this blender! You’re the best!
Another blender saved! Glad this helped you out.
Thank you so much! My old Mum and I have been trying to operate our furnished apartment's Ninja blender....we just couldn't make it work...till I found your video of course...turns out we weren't pointing the arrows right. Hate the blender for that but thanks.
Hope this helped you guys out. It's a great blendah
I got my Ninja used from a friend who didn't give me the user's manual (not that I would read it anyways) and so I couldn't figure out why the power light kept blinking red. This video was helpful in figuring it out right away! (the arrows weren't lined up. Easy fix!!) Thanks!
Glad this helped you out.
Thank you it was the cover for my blender, that is the reason it was blinking
Glad I could help! Have a great day!
Thanks mate... very helpful, almost threw away my blender before watching this video
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Omg...thank you for this video I got my blender all hooked up wrong way and I thought it was broke this video helped me a lot thanks
You’re welcome. Glad this helped you out
Amazing!!! Thank you !!! Helped us save $70 to buy a new one. We thought it was broken lol
Another blender saved!
Thank you. ❤ I was fixing to cry. It was a gift from my daughter and it's pretty new.
Glad I could help!
OMG thanks so much I just received this in the mail and was freakingout like it cant be that hard couldnt figure out what I was doing wrong so like alwasy UA-cam is my best friend.... you rock thanks dude:):):) my problem was the arrows were not lining up
Glad this helped you out.
Was given to me had NO manual
Thanks for all the tips, it now working
Just needed to line up arrows
Glad it helped
I was literally going to buy a new blender tomorrow. ..thank you
+thank you you're welcome, thanks for watching
This video was very helpful. Thanks. Keep the good videos coming
Glad this helped you out.
Good stuff, I inherited a different model and I couldn't figure out why it wouldn't work. This information worked on my model as well. Thanks!
Glad this helped you out.
Omg thank you so much!! You saved me from buying a new blender!!! 😁👍🏻
Glad I could help!
thank you!! did not know the arrows had to be lined up. saved me a bunch more frustration, thanks!
Glad this helped you out.
5 years later this video helped thank u!
Glad it helped!
Thank you !!!! You help me fix my blender and I really needed it lol
You’re welcome, glad this helped
AWESOME video! I was wondering if the new blender l just bought was already faulty. I checked the lid, as you suggested, and sure enough, rhe lid was not tight. Now the blender is working fine. Thanks a million!
Thanks for watching
Thank you. The second step helped me: lining up the arrows 👍 it’s been awhile since I used it.
Glad it helped!
Hooray!! We were able to fix our blender, thank you!!!
+morgan mills glad this helped you out
The lid was misaligned. Why is thing so complicated? First I couldn't open the lid and needed a video for that. The I immediately needed a video for the blinking red light.😆 Thanks!
Hope this helped you out.
Got the clue I needed. Thanks. Sometimes it is the most basic things we overlook.
Glad this helped you out.
This was very helpful video. Light was flashing didn't know what to do. Arrows were not lined up. Thanks so much!!
+Donna-Marie DeRose you're welcome.... Happy Holidays
Thank-you I got my Ninja working thanks to you!
Thank you, ours isn't too old and either- we used to use it often and just forgot. Thank you so much for your video!!!!!!!
You’re welcome
Broooo, thank you so much!!! My gf tasked me with fixing her blender lol, turns out that our lid is wearing out and the pin on the corner just needs a little extra help pushing the button down!
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
very helpful! Thanks for putting the video out.
+Jie Yang you're welcome
Exactly what I needed thank you for saving me a big headache.
Glad it helped!
Thank Heavens for your video. I was SO UPSET! 👏🏼👏🏼👏🏼😂🎯💜💜💜
Thanks for watching!
This helped me after my mom gave us her old ninja with no instructions thank you!
Thanks for watching. Glad to here this helped you out
Oh my gosh thank you so much I could not get this to work but then I looked it up and this video saved my life !!! 😆💯
+Alexis Baire You're welcome. This has tripped a lot of people up..lol
I too want to say thanks a lot for your effort because I was stranded without the manual and had to get things done and here this thing just blinks at me.
thank you so much! i was stuck, and your explanation worked!
Glad this helped you out.
Wow! I thought I scored a free broken ninja 🤣🤣 Even if it is a super old model! It's working now!! Thank you!!!
Glad it helped!
Thank you for helping me this morning with this video!
Thanks for watching. Don't forget to sub the channel to for more videos like this!
Great thanks. The arrows were not lined up😳 I had it in a box over a year. I thought I was going to buy a new one. Thanks again.
Thanks for watching
success!!! thank u!!!!!! I didn't know the white arrows had to b lined up. Got for free at a yard sale the people said it stopped working figured it was worth a little fix!!! and it works
Glad this helped you out