I"m getting 21.7mpg which is pretty good for a modded car with no tune. I'm saving at the moment for a tune so I'll see if the mpg will change Dylan Murphy
Looks like you need valve seals on the valves that go to the drivers side of the exhaust. That's what is nice about dual exhaust. Looking good bro keep it up. 👍🏼💯
I probably went one week with that set up and went and got a huge as resonator from Magnaflow and not long after a Magnaflow catalytic converter just to show incase I got stopped. I drive my car daily so the excessive noise pollution and smell of gas was just unacceptable. Got nuff codes during the process though and had to change my four O2 sensors and MAF sensor. Got rid of most of them except for the disabled EGR and the one for removing the three cats. The codes came off on its own some how.
Props to you on your max bro. I have a 98 Lexus GS 300 and was looking to get a BMW like 530 or 335 but seeing this is making me consider getting a 6th gen max!!!!
Nice man, 14s in 1/4mile is nice for a 4dr sport sedan, mine is automatic but I love the sound off the vq35de, do you have any tune? you have your check engine on right? the magnaflow cat is not enough? or is because the EGR system delete?
Yes if you pull off your 04-06 trunk lip there will be holes that the 07-08 spoiler does not cover and you'll have to pay a bodyshop to cover and paint the trunk over. I've seen guys install the 07-08 on the 04-06 spoiler but that's you're only other option. You can get it colour matched for about $120 shipped off of ebay.
With the headers did you feel any loss of torque? (because you dont have the pre-cats) you only have just one cat (the stock one)? btw I love the sound, I want that loud sound for my maxima, thanks
Yes it is. The Altima's and Maxima's carry the same VQ35DE engines so it bolted up with little to no bending. You can find it on Ebay under the 02-06 VQ35DE Altima headers performance headers. The prices may vary so look for the correct one. Do your homework and inquire before doing this performance mod to your car because when you do the performance headers your car won't pass emissions again and you'll have troubled codes
I'm still to do a tune and install my intake manifold spacers. The only check engine light I had was the O2 sensor and the MAF sensor from a previous incident. I extended my wires and cleared the codes so everything is all well. But that was my car man, I can't speak for yours.
I'm not sure what car you have but if you have a VQ35DE you can just get a catback with the magnaflow mufflers and the sound would impress you. I modified my system a whole lot because it was loud,and poluting the air meaning smoke like crazy.I added a magnaflow resonator and catalytic converter and it ruduced the sound a good 40-50% and now i'm happy.The CAI isn't AEM,it's a HPS and I got it from Ebay.My exhaust cost me a ton of money because I wanted it to be soft and perform at the same time.
You have to run an regular foglight harness with a HID kit. It's powered from the ignition and controlled with an on/off switch so that you can turn it off at night because it will shine directly in other motorist eyes. At the time they didn't have the bulb for the housing so it modified a H3 bulb to fit it. I left room for the heat to escape because the first ones melted from the excessive trapped in the housing. Since I've modified it this time for the heat to escape it hasn't melted
Understandable, but if you look at the title it will explain why you see a service engine soon light. The 04 Maxima's comes with three catalytic converters and the performance headers has none for ultimate performance. Also because the O2 sensor inlet is difference from the performance the O2 sensor wires had to be extended. Next is the EGR valve, that was disabled because it was a lot of work to drill the header because the EGR valve is I think brass or copper. So with mods this is normal
They are The 04 Altima performance headers from Ebay that has no catalytic converters. And no the O2 sensers will need to be extended for it too work. I use old wires from the Saab because it was really long. Try to do it ASAP because the longer you stay without them the more gas you'll be using and the smell will be horrible
Nice man, sounds aggressive but very loud for daily driving your right lol. Nice though. Good Tune will do wonders for the car. You can easily see 260+ to the wheels with those mods and a good tune. I used the UpRev software because I needed a tune after changing cams, but I was able to get nearly 300 whp/wtq out of an all motor stock shortblock VQ35(2006 VQ35/6-speed with Injen cold air, Cattman Headers, Ypipe, Magnaflow catback, NWP spacers and block plate, JWT S2 cams, Supertech valve springs, Osiris UpRev tuned- 296whp/289wtq) best ET 12.92@ 112. Never had this one on slicks, street tires only.
I made 253whp 255wtq on dynopack which is about a 5-6whp less than dynojet so you're right. I have a 4" maf with 570cc injectors, ported IM to put in and hopefully drop the tranny and replace it with a stg3 Action clutch and lightweight flywheel them retune that bitch. Got big plans for her but it's hard especially now that I have a car with financing. But real shit if I ran 12.9 up here nobody could fuck with me 😂😂😂
You can definitely get it there. Mine was more along the lines of the weight of an Altima though, as I did a rear seat delete, removed a lot of sound deadening material, deleted rear trunk area carpet and paneling etc. 3319lbs with about 1/2 tank of gas track ready. Also, smaller wheels made a huge difference for my ETs. Running on some lightweight 15" wheels was worth 3 tenths (.3) over OEM wheels/tires. Cams were the biggest felt improvement though. Jim Wolf knows his shit bro seriously. Fuckin car SCREAMED from 5000-7750 where my ignition cut was set. The up top was insane on highway pulls, and the switch from stock 06 VQ cams to the JWT cams and associated tuning was worth nearly 35HP and 30 ft lbs.
+Joe Doole bro at this shitty cdn us exchange rate I can't afford any major mods from the US. The stg3 clutch and lightweight flywheel is all I need before I retune then I'm done trying to go faster.
Oh I didn't know you were outside the U.S. That sucks having to pay so much for parts. My ACT clutch kit cost less than $430 shipped here. And as far as the tuning goes, yea I do tune my own vehicles now. Also tune a few from our local clubs. Nistune, UpRev and Hondata are where my expertise lies though. It's not hard to do yourself once you have the software; just get a wideband and start familiarizing yourself with what AFRs do during different loads/speeds and RPMs, then start with fuel maps leaving timing alone. See what changes work and what does not yield power, then adjust accordingly and move your way up. A dyno is helpful, but you can still get just as good a tune from street pulls.
Thanks bruh. Great choice man, 6thgen 6spd transmission is very strong and it has a lot of options like power seats, heated steering wheel, heated front and rear seats, and other things. I personally love them because of the luxury and performance it offeres. Good luck finding a good one with low mileage for a decent price.
Thanks man. I think it's a 20% in the rear and 35% in the front. This is an expensive tint and I have black interior so it will give a different effect. If you have a different colour interior then you should tint your car according to the interior, meaning if you have a tan or light colour interior it will appear lighter than it actually is.
If I just want that real low 'vroom' or whatever you call it lol can I put just the mufflers, and replace the resonator? I'm also looking to put a CAI in mine and wondered where you picked up your AEM one. Appreciate any help :) oh and 'service engine soon' haha. BTW that car was ... LOUD!
I'm in scarborough. That video was actually taken in brampton off of dixie. I have the ebay N1 catback with the magnaflow mufflers and it was the best sound ever. I'm adding all the bolt on's mods to see what she does on the track so that's why I added the headers. It's so loud that I want to reverse it ASAP and accept my loses. Yo if you're down for some drag at cayuga in the next two week hit me up man. A bunch of altima's do it every so often. Link up
That's how they design the electrical system bro. Having the hi beam and low beam on at the same time would drain the hell outta your battery. I mean for what reason would you need hi and low beam on the same time? More bright? Upgrade the bulb to a 8K HID bulb or add a HID kit to your fogs.
Yo Jason I got a question bro I have a 04 Max I notice @ 1st u had that mini rear spoiler which also I have right now but I wanted to replace it with the 6.5Gen (07-08) rear spoiler I was wondering when u exchanged yours did it leave any hole from the mini spoiler? Coz I wana get that spoiler change I like the actual 07-08 rear spoiler makes the Max hotter
That's what's up! Shit looks nice. I was tying to Decide on what vehicle to get between maxima 2004 or g35 2004 and Tl. This video helped me make up my mind
when u disable it do u get a code r the car burn fuel different ? i have seen that u dont use o2 sensor and the a/f ratio sensor do u relocate them to stop car from burning to rich ?
It's the same car but I don't know anyone who did the Altima headers on the 6.5gens. Honestly bro if you don't plan to race don't do headers, it's too much work, too much stress for a little gains and the only way you will gain a lot is by getting all the bolt-on's available then getting a tune. Do the y-pipe and catback, CAI, crank pulley, and NWP block off plate and that should make you run a lot faster. The headers is just a lot of work to correct troubled codes and all that good stuff.
its def loud you may want switch your resonator to limit the noise. I personally could not drive around like that. Thats why i just did the catback. Happy with the growl that alone gives off, than the fujita kickin in. Never been racing before, but I may hit you up one of these days and we can sync up.
You will gain but not a lot. The misconceptions that ppl get is they watch the listing advertising a 10-15hp gain, that will only be accomplished when you do a tune. The power is there it's just your ECU can't recognize it so after all your bolt-on's you have to do a tune to release all the trapped power.
Hey mr jason lyrics...I have the same car 6 speed....so far I only installed the Intake....I wana put some headers....but im afraid how will that affect my gas milage bad? Good? and how can I erase the codes? How many sensors do I need to fix in order not to get chek engine light
If your car sounds like this then you're obviously going to have performance. The mods that I had was the Ebay N1 catback, Ebay 02 Altima performance headers, CAI, and Magnaflow mufflers 14816. It will cost quite a bit of money to achieve this so my advice to you is if you don't plan to race your car don't do it. Do the Ebay N1 catback, CAI, nwpengineering BOP and the Magnaflow mufflers.
Hey jason quick question so i was looking at the ebay mufflers and i see two of them are around $180 and others for $300-$350. they look the same and both say stainless steel. which one should i buy ? both r the same quality arent they ? they just e bay exhaust ? thx let me kno just got a job and want an exhaust for my maxi :) lool thx
There's headers for the 6thgen maxima. Racingline and Cattman headers makes them but they are very costly. These are the 04 Altima headers because they have the same VQ35DE 3.5 liter engine and the subframe isn't that much off. look on ebay and you'll find them. Inbox me if you have any questions
Ok so I too have a 04 Maxima 6spd and I'm looking for headers so how do the altima headers work on there otherwise the Maxima headers are like 500 bucks
I already did. It shuck the house, gave off a ton of smoke, smelt like gas to the no cats and when I say police I couldn't accelerate. It was too much to deal with.
Why so angry bro? It's hanging like that because it was modfied for my GT-R bodykit. This is a daily driven car so I have to cater for winter and summer
What all did you get for it to sound like that? I'm looking to get an exhaust for my 04 Nissan Maxima and I was wondering what all you put into it to sound like that and how much it cost?
Were your headers just stock altima's. because i found obx altima 02-06 headers. i just dont want to buy something thats not going to fit. which ones do you have?
You think so? That shit will wake the dead and it had backfire on every shift along with the smell of gas and black smoke. I used it for three days until I got one massive Magnaflow resonator to quiet her down. The thing you hear is my radar detector.
i got a question for you my friend. my maxima cant turn on the fogs lights and the high beam, can you tell me how do you do that. the wiring diagram please. sorry for my english.
Yes I do have burning too rich codes and I think it's because I had a defective MAF sensor that I neglected and by the time I changed it along with the engine the car started burning rich after. I'm really pissed because I really didn't know if I didn't change my MAF sensor I could mess up my O2 sensors. I extended my two lower sensors and I didn't have any problem but now the car uses fuel like freaking crazy. It never ends. I've had it up to here with replacing shit. FML!!!
I want them on my 05, I have a intake and ebay catback, how much hp will gain? its a 5 speed btw. Other ?, its hard to mount them, i did my timing chains alone, its harder than the chains?
Hellz yeah man. I just gotta get a few weeks at the track and see what's my best time then i'm going back to show mode. The car look aight but when the kit and the 22's are on it's just constant attention. I'll still race with the bodykit just switch out eh rims.
Not at all man. The car is faster than it's ever been. It's the ebay 04 altima headers and it bolts up the the VQ35DE 3.5 liter engines no problem. Check out my newest videos and tell me what you think.
It seems that you're right bro. I don't see the one I bought and the ones I see comes in parts. I guess that's your only option other than the overpriced Racingline Pre-Cats
Gerwich Saint-Hilaire It's hard to say bro because this car already lasted the life expectancy of most parts and it will start costing you a bit. Most major components like ABS module, calipers, engine and tranny might start giving trouble so it all comes down to how the previous owner took care of it. Keep an eye on the oil cuz these VQ's do consume so get in the habbit of checking it on a regular. Good luck.
That header fits the Max with no custom work involved? Just straight bolt on? o.O....I've been looking for a direct fit header, but I've been having some trouble finding one (just got the car a few days ago.)?
Oh ok koo so the whole trunk gotta b repaint after they cover the holes from the mini rear spoiler and yea I've seen em on eBay that's were ima order mine I just wanted to kno on a different wat I gotta get done
I'm getting a black 04 maxima for 2k with 110k on it . I was only gonna get it tinted and paint the rims. Are these cars naturally quiet. My camry sounds like a fucking race car rn so I want a quiet car atm
Im a newb to the whole exhaust set ups so I went with the easy route and bought the greddy full catback, i like the sound but its not quite what I was looking. Is it possible to cut off the greddy mufflers and wield on the magnaflows? Or would i have to change out the whole exhaust?
MrJasonlyrics The greddys are actually way too quiet probably 3 or 4 on a scale to 10 of loudness. I'm going to chop the greddy mufflers and pick up the magnaflow mufflers. I think the ebay n1catback and the greddy catback has slightly different piping size does that matter? I know you said it was way too loud with headers, I have hfpc will a resonator be necessary? I'm hoping for a 6 to 7 of loudness without rasp... Thanks in advance for all your help hopefully one day you'll come down to Miami I'd love to see your car in person.
I"m really not sure about the specs on the GReddy and I'm not sure what it will sound like, you're just going to have to commit to the chop and weld and if it's still too loud get a resonator. I hope you get what you're looking for and definitely make some videos before, during and after with your feedback. Good luck.
MrJasonlyrics will do thanks for the reply... I have one last question, I've heard you highly recommending a lightweight pulley which brand did you go with and where did you order it from?
I have a 07 maxima straight pipe , cold air intake , open headers , 75 mm throttle body , and it sounds amazing
Tariq Zraika where did you get the headers from
Where did you get the headers from
It amazes me how many youtube mechanics are telling you that you need valve seals and that you are burning oil 😂😂😂
I"m getting 21.7mpg which is pretty good for a modded car with no tune. I'm saving at the moment for a tune so I'll see if the mpg will change Dylan Murphy
Yo I got a 03 with v6 3.5 engine is it possible for those same headers to work on it
Same, I'd like to know
Looks like you need valve seals on the valves that go to the drivers side of the exhaust. That's what is nice about dual exhaust. Looking good bro keep it up. 👍🏼💯
How u gunna tell if the driver side needs valve seals when there's a Y pipe
I probably went one week with that set up and went and got a huge as resonator from Magnaflow and not long after a Magnaflow catalytic converter just to show incase I got stopped. I drive my car daily so the excessive noise pollution and smell of gas was just unacceptable. Got nuff codes during the process though and had to change my four O2 sensors and MAF sensor. Got rid of most of them except for the disabled EGR and the one for removing the three cats. The codes came off on its own some how.
Props to you on your max bro. I have a 98 Lexus GS 300 and was looking to get a BMW like 530 or 335 but seeing this is making me consider getting a 6th gen max!!!!
Nice man, 14s in 1/4mile is nice for a 4dr sport sedan, mine is automatic but I love the sound off the vq35de, do you have any tune? you have your check engine on right? the magnaflow cat is not enough? or is because the EGR system delete?
Yes if you pull off your 04-06 trunk lip there will be holes that the 07-08 spoiler does not cover and you'll have to pay a bodyshop to cover and paint the trunk over. I've seen guys install the 07-08 on the 04-06 spoiler but that's you're only other option. You can get it colour matched for about $120 shipped off of ebay.
With the headers did you feel any loss of torque? (because you dont have the pre-cats) you only have just one cat (the stock one)?
btw I love the sound, I want that loud sound for my maxima, thanks
Yes it is. The Altima's and Maxima's carry the same VQ35DE engines so it bolted up with little to no bending. You can find it on Ebay under the 02-06 VQ35DE Altima headers performance headers. The prices may vary so look for the correct one. Do your homework and inquire before doing this performance mod to your car because when you do the performance headers your car won't pass emissions again and you'll have troubled codes
I'm still to do a tune and install my intake manifold spacers. The only check engine light I had was the O2 sensor and the MAF sensor from a previous incident. I extended my wires and cleared the codes so everything is all well. But that was my car man, I can't speak for yours.
Looks a lot better without the body kit man. Looks clean.
I'm not sure what car you have but if you have a VQ35DE you can just get a catback with the magnaflow mufflers and the sound would impress you. I modified my system a whole lot because it was loud,and poluting the air meaning smoke like crazy.I added a magnaflow resonator and catalytic converter and it ruduced the sound a good 40-50% and now i'm happy.The CAI isn't AEM,it's a HPS and I got it from Ebay.My exhaust cost me a ton of money because I wanted it to be soft and perform at the same time.
You have to run an regular foglight harness with a HID kit. It's powered from the ignition and controlled with an on/off switch so that you can turn it off at night because it will shine directly in other motorist eyes. At the time they didn't have the bulb for the housing so it modified a H3 bulb to fit it. I left room for the heat to escape because the first ones melted from the excessive trapped in the housing. Since I've modified it this time for the heat to escape it hasn't melted
The 6spd's comes with 265 to the crank which is about 229whp.
Understandable, but if you look at the title it will explain why you see a service engine soon light. The 04 Maxima's comes with three catalytic converters and the performance headers has none for ultimate performance. Also because the O2 sensor inlet is difference from the performance the O2 sensor wires had to be extended. Next is the EGR valve, that was disabled because it was a lot of work to drill the header because the EGR valve is I think brass or copper. So with mods this is normal
Those are a Satin Black can spray. It came out pretty good for can spray
They are The 04 Altima performance headers from Ebay that has no catalytic converters. And no the O2 sensers will need to be extended for it too work. I use old wires from the Saab because it was really long. Try to do it ASAP because the longer you stay without them the more gas you'll be using and the smell will be horrible
im a girl and i blacked out my altima..how did u black out ur tail lights?? i luv it... :) thxs
Nice man, sounds aggressive but very loud for daily driving your right lol. Nice though. Good Tune will do wonders for the car. You can easily see 260+ to the wheels with those mods and a good tune. I used the UpRev software because I needed a tune after changing cams, but I was able to get nearly 300 whp/wtq out of an all motor stock shortblock VQ35(2006 VQ35/6-speed with Injen cold air, Cattman Headers, Ypipe, Magnaflow catback, NWP spacers and block plate, JWT S2 cams, Supertech valve springs, Osiris UpRev tuned- 296whp/289wtq) best ET 12.92@ 112. Never had this one on slicks, street tires only.
I made 253whp 255wtq on dynopack which is about a 5-6whp less than dynojet so you're right. I have a 4" maf with 570cc injectors, ported IM to put in and hopefully drop the tranny and replace it with a stg3 Action clutch and lightweight flywheel them retune that bitch. Got big plans for her but it's hard especially now that I have a car with financing. But real shit if I ran 12.9 up here nobody could fuck with me 😂😂😂
You can definitely get it there. Mine was more along the lines of the weight of an Altima though, as I did a rear seat delete, removed a lot of sound deadening material, deleted rear trunk area carpet and paneling etc. 3319lbs with about 1/2 tank of gas track ready. Also, smaller wheels made a huge difference for my ETs. Running on some lightweight 15" wheels was worth 3 tenths (.3) over OEM wheels/tires. Cams were the biggest felt improvement though. Jim Wolf knows his shit bro seriously. Fuckin car SCREAMED from 5000-7750 where my ignition cut was set. The up top was insane on highway pulls, and the switch from stock 06 VQ cams to the JWT cams and associated tuning was worth nearly 35HP and 30 ft lbs.
+Joe Doole bro at this shitty cdn us exchange rate I can't afford any major mods from the US. The stg3 clutch and lightweight flywheel is all I need before I retune then I'm done trying to go faster.
Oh I didn't know you were outside the U.S. That sucks having to pay so much for parts. My ACT clutch kit cost less than $430 shipped here. And as far as the tuning goes, yea I do tune my own vehicles now. Also tune a few from our local clubs. Nistune, UpRev and Hondata are where my expertise lies though. It's not hard to do yourself once you have the software; just get a wideband and start familiarizing yourself with what AFRs do during different loads/speeds and RPMs, then start with fuel maps leaving timing alone. See what changes work and what does not yield power, then adjust accordingly and move your way up. A dyno is helpful, but you can still get just as good a tune from street pulls.
+Joe Doole do you have any social media? I think you could be of great help to me. If you got fb lmk and I'll send you a request.
Thanks bruh. Great choice man, 6thgen 6spd transmission is very strong and it has a lot of options like power seats, heated steering wheel, heated front and rear seats, and other things. I personally love them because of the luxury and performance it offeres. Good luck finding a good one with low mileage for a decent price.
NICE MAX BRO.... QUESTION WHAT KIND OF PAINT DID U USE FOR UR RIMS???
I'm buy one of those Nissan maxima se/ SL in spring and I want to know what u used to suit it up.
Thanks man. I think it's a 20% in the rear and 35% in the front. This is an expensive tint and I have black interior so it will give a different effect. If you have a different colour interior then you should tint your car according to the interior, meaning if you have a tan or light colour interior it will appear lighter than it actually is.
If I just want that real low 'vroom' or whatever you call it lol can I put just the mufflers, and replace the resonator? I'm also looking to put a CAI in mine and wondered where you picked up your AEM one.
Appreciate any help :)
oh and 'service engine soon' haha. BTW that car was ... LOUD!
hmmm sounds good to me....nice look wtg
i installed the 07 spoier and the mini is not bolted in,your ok to install!
I'm in scarborough. That video was actually taken in brampton off of dixie. I have the ebay N1 catback with the magnaflow mufflers and it was the best sound ever. I'm adding all the bolt on's mods to see what she does on the track so that's why I added the headers. It's so loud that I want to reverse it ASAP and accept my loses. Yo if you're down for some drag at cayuga in the next two week hit me up man. A bunch of altima's do it every so often. Link up
You selling your header?
@@terryreyes1125 they've been gone years now.
That's how they design the electrical system bro. Having the hi beam and low beam on at the same time would drain the hell outta your battery. I mean for what reason would you need hi and low beam on the same time? More bright? Upgrade the bulb to a 8K HID bulb or add a HID kit to your fogs.
Yo Jason I got a question bro I have a 04 Max I notice @ 1st u had that mini rear spoiler which also I have right now but I wanted to replace it with the 6.5Gen (07-08) rear spoiler I was wondering when u exchanged yours did it leave any hole from the mini spoiler? Coz I wana get that spoiler change I like the actual 07-08 rear spoiler makes the Max hotter
thanks trying to get faster but i will keep watching your videos
Damn! That sounds so good. Love this ride of yours. I may have to get a matching Max to go with my Alt. Lol
That's what's up! Shit looks nice. I was tying to Decide on what vehicle to get between maxima 2004 or g35 2004 and Tl. This video helped me make up my mind
when u disable it do u get a code r the car burn fuel different ?
i have seen that u dont use o2 sensor and the a/f ratio sensor do u relocate them to stop car from burning to rich ?
Have you had any issues with authorities due to the loudness of your mufflers? I like the sound, it's pretty awesome and powerful.
Just picked up a 04 SE-R Altima for parts so the motor will be going into the maxima. Doing a little work so I'll post a video soon. Stay tuned man
love it good job leave it like that it gonna tune in with engine after a while great job....
It's the same car but I don't know anyone who did the Altima headers on the 6.5gens. Honestly bro if you don't plan to race don't do headers, it's too much work, too much stress for a little gains and the only way you will gain a lot is by getting all the bolt-on's available then getting a tune. Do the y-pipe and catback, CAI, crank pulley, and NWP block off plate and that should make you run a lot faster. The headers is just a lot of work to correct troubled codes and all that good stuff.
that magnaflow got that pop back for ya...lol... I see why you went for the N1 muffler, less noisey
Yes I did. I used too much but it can easily be buffed
Thanks man, I appreciate it, you max is clean
I will start my project soon
its def loud you may want switch your resonator to limit the noise. I personally could not drive around like that. Thats why i just did the catback. Happy with the growl that alone gives off, than the fujita kickin in. Never been racing before, but I may hit you up one of these days and we can sync up.
Like ya max bro! Nice roar, really loud. What part of Ontario you from? I got a 04 Max as well. I'm happy with my ebay catback lol I'm in Brampton
You will gain but not a lot. The misconceptions that ppl get is they watch the listing advertising a 10-15hp gain, that will only be accomplished when you do a tune. The power is there it's just your ECU can't recognize it so after all your bolt-on's you have to do a tune to release all the trapped power.
I have the same car but not like yours but I have to say u are the man......
Hey man love the way your max looks where did you get that grille? I've been tryin to find one like it but have had no luck :(
I found a few different style headers for an 04 Altima on Ebay, which do you prefer? Any other suggestions?
I just bought obx headers for my 6 speed maxima. Did you get a tune?
Hey mr jason lyrics...I have the same car 6 speed....so far I only installed the Intake....I wana put some headers....but im afraid how will that affect my gas milage bad? Good? and how can I erase the codes? How many sensors do I need to fix in order not to get chek engine light
CLEANNNNNNN!!! i prefer this over a mustang
Hey man which headers did you use and did they bolt up or did you have to do some fabrication
Ebay headers, they bolt up with a little bit of fabrication.
If your car sounds like this then you're obviously going to have performance. The mods that I had was the Ebay N1 catback, Ebay 02 Altima performance headers, CAI, and Magnaflow mufflers 14816. It will cost quite a bit of money to achieve this so my advice to you is if you don't plan to race your car don't do it. Do the Ebay N1 catback, CAI, nwpengineering BOP and the Magnaflow mufflers.
Hey jason quick question so i was looking at the ebay mufflers and i see two of them are around $180 and others for $300-$350. they look the same and both say stainless steel. which one should i buy ? both r the same quality arent they ? they just e bay exhaust ? thx let me kno just got a job and want an exhaust for my maxi :) lool thx
There's headers for the 6thgen maxima. Racingline and Cattman headers makes them but they are very costly. These are the 04 Altima headers because they have the same VQ35DE 3.5 liter engine and the subframe isn't that much off. look on ebay and you'll find them. Inbox me if you have any questions
Ok so I too have a 04 Maxima 6spd and I'm looking for headers so how do the altima headers work on there otherwise the Maxima headers are like 500 bucks
Do you have a vid of you puting them on
@@chrisbaltes9084 the install would probably cost around $500-550 labour, the headers are from ebay $250-300
@@chrisbaltes9084 unfortunately no I paid a mechanic to d it.
@MrArconz Appreciate it man. Yeah the best is yet to come. I just hope the cops don't buck me before that. I'll try to get some up soon
No need to quiet it down son,,,its sounds amazing,,,,good luk with it,,
I already did. It shuck the house, gave off a ton of smoke, smelt like gas to the no cats and when I say police I couldn't accelerate. It was too much to deal with.
What did u do different to it,,?
Jnevone DSF I added a Magnaflow muffler and a catalytic converter to it. Problem solved.
So from Nov 1st, 2011 to the date you uploaded this vid , what all did you change because there's a whole new level of feedback in the last vid.
+Tyler Byers Resonator and high flow cat.
I love this car it's a beast
Why so angry bro? It's hanging like that because it was modfied for my GT-R bodykit. This is a daily driven car so I have to cater for winter and summer
your car sounds sick man! I'm getting an maxima soon and i wanna do the same!
How much is this car worth with the upgrades?
What all did you get for it to sound like that? I'm looking to get an exhaust for my 04 Nissan Maxima and I was wondering what all you put into it to sound like that and how much it cost?
Using gasoline or other method? Trying to take off paint off mine
Hell yeah it's raspy. I hated it with a passion so I added a big ass resonator and catalytic converter. It's perfect now.
Were your headers just stock altima's. because i found obx altima 02-06 headers. i just dont want to buy something thats not going to fit. which ones do you have?
Hey quick question, does it have to be the se-r headers or just the regular altima v6 will fit? and would the o2 sensors reach? thx
You think so? That shit will wake the dead and it had backfire on every shift along with the smell of gas and black smoke. I used it for three days until I got one massive Magnaflow resonator to quiet her down. The thing you hear is my radar detector.
i want mine to sound just like this!! i don't care about performance..just the sound. how do i achieve this?
i got a question for you my friend. my maxima cant turn on the fogs lights and the high beam, can you tell me how do you do that. the wiring diagram please. sorry for my english.
Yes I do have burning too rich codes and I think it's because I had a defective MAF sensor that I neglected and by the time I changed it along with the engine the car started burning rich after. I'm really pissed because I really didn't know if I didn't change my MAF sensor I could mess up my O2 sensors. I extended my two lower sensors and I didn't have any problem but now the car uses fuel like freaking crazy. It never ends. I've had it up to here with replacing shit. FML!!!
Sounds pretty good to me. Nice
One day it'll be able to have performance like the r35 Nissan GTR after all you fit it's engine in your car
I want them on my 05, I have a intake and ebay catback, how much hp will gain? its a 5 speed btw. Other ?, its hard to mount them, i did my timing chains alone, its harder than the chains?
sick ride dude!
Hellz yeah man. I just gotta get a few weeks at the track and see what's my best time then i'm going back to show mode. The car look aight but when the kit and the 22's are on it's just constant attention. I'll still race with the bodykit just switch out eh rims.
When i look them up there is a couple of different ones. Is it the one with down pipe combo?
Not at all man. The car is faster than it's ever been. It's the ebay 04 altima headers and it bolts up the the VQ35DE 3.5 liter engines no problem. Check out my newest videos and tell me what you think.
They are OEM I just tinted it with nightshades.
It seems that you're right bro. I don't see the one I bought and the ones I see comes in parts. I guess that's your only option other than the overpriced Racingline Pre-Cats
Very nice car my dude, nice little mod too, but too loud though, im planning on buying this type of model, so how is the maintenance with that
Gerwich Saint-Hilaire It's hard to say bro because this car already lasted the life expectancy of most parts and it will start costing you a bit. Most major components like ABS module, calipers, engine and tranny might start giving trouble so it all comes down to how the previous owner took care of it. Keep an eye on the oil cuz these VQ's do consume so get in the habbit of checking it on a regular. Good luck.
MrJasonlyrics Thank you so much for taking your precious time to answer my question brohh, God Blessed!!!
Hey what did you do for your tail lights? are those aftermarket or is that like night shade.
also what's the grill
this is night shades. There's tint vinyl now available.
wow man sounds like a beast! where did you get the headers and catback from?
Rigo Hdz Ebay.
Do think them headers with fit in my 08 maxima?
cleanest maxima on youtube, second to chernmax's turbo max
thanks man ima see if i can get it... or get another rims..
and i was also wanting to ask aboit your lip? where did you find it. i really like your
My lip was custom made from a 07-08 ebay lip. Lots of work to do. And the headers was also from eBay, 02-06 altima per headers.
That header fits the Max with no custom work involved? Just straight bolt on? o.O....I've been looking for a direct fit header, but I've been having some trouble finding one (just got the car a few days ago.)?
02-06 Altima SER 3.5L headers will fit the 04-06 Maximas'
ahh, great. excellent. gonna pick one up now. thanks
Do these Altima headers have any clearance issues? I've read some people have to shave the starter a bit or add some fabrication to clear.
Vulgarus Nope. You don't have to shave anything.
MrJasonlyrics No difference between 08 and 04 maxima right? Both are 6th gen. And you got a video about what you did with o2 sensors?
They were spray painted black (rims)
Where did u get the headers and the exhaust? After watching your video i want mine the same
Ebay for the 02-06 Nissan Altima performance headers, eBay cat back and magnaflow mufflers.
@@MrJasonlyrics thanks man great video though 👊
@MrJasonlyrics, did you blacked out your tail lights with vht or vinyl here?
Oh ok koo so the whole trunk gotta b repaint after they cover the holes from the mini rear spoiler and yea I've seen em on eBay that's were ima order mine I just wanted to kno on a different wat I gotta get done
where did you get the altima headers
I'm getting a black 04 maxima for 2k with 110k on it . I was only gonna get it tinted and paint the rims. Are these cars naturally quiet. My camry sounds like a fucking race car rn so I want a quiet car atm
You ever dyno?
thanks man ima see if i can get it or get another rims
burning rich??
I have an o7 . Is it still good ?
nice set up man! I have a 5th gen automatic but currently looking for a 6th gen manual. #maximanation
Yes this is Satin Black can spray.
Im a newb to the whole exhaust set ups so I went with the easy route and bought the greddy full catback, i like the sound but its not quite what I was looking. Is it possible to cut off the greddy mufflers and wield on the magnaflows? Or would i have to change out the whole exhaust?
Nevermind you answered my question below lol
Too loud? And yes you can get something else if the GReddy is too loud.
MrJasonlyrics The greddys are actually way too quiet probably 3 or 4 on a scale to 10 of loudness. I'm going to chop the greddy mufflers and pick up the magnaflow mufflers. I think the ebay n1catback and the greddy catback has slightly different piping size does that matter? I know you said it was way too loud with headers, I have hfpc will a resonator be necessary? I'm hoping for a 6 to 7 of loudness without rasp... Thanks in advance for all your help hopefully one day you'll come down to Miami I'd love to see your car in person.
I"m really not sure about the specs on the GReddy and I'm not sure what it will sound like, you're just going to have to commit to the chop and weld and if it's still too loud get a resonator. I hope you get what you're looking for and definitely make some videos before, during and after with your feedback. Good luck.
MrJasonlyrics will do thanks for the reply... I have one last question, I've heard you highly recommending a lightweight pulley which brand did you go with and where did you order it from?