DIY DRIVEWAY Raptor Bed Liner in 4 Easy Steps!
Вставка
- Опубліковано 5 жов 2024
- Looking to protect your truck bed from scratches, dents, and wear and tear? Look no further than our simple diy 4 Step tutorial on how to apply a durable and stylish Raptor Bed Liner on our 1995 Ford F150. In this video, we show you how to apply a durable and stylish Raptor Bed Liner to your own truck. Our simple 4-step tutorial is easy to follow and can be done in just a few hours. Say goodbye to expensive bed liners and hello to an affordable and easy-to-do-it-yourself solution that will make your truck look and function better than ever. Don't miss out on this essential guide to DIY Raptor Bed Liner - watch our video now! YOU CAN DO THIS! So what are you waiting for? Watch our video now and learn how to protect your truck bed like a pro!
🔶 Support our Channel by becoming a JMR SuperFAN by Ringing the Notification Bell!
🔶 or JOIN our PATREON! / jmrrebuilders
🔶 or BUY a beanie or T-shirt www.jmrrebuild...
🔶 or VISIT our Amazon Affiliate Storefront here - www.amazon.com...
Black Raptor Liner HERE!!!! - amzn.to/3jdgELW
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
Painters Tape - amzn.to/3qnQQ34
Painters Tape and Drape - amzn.to/3eDlBhV
Adhesion Promoter - amzn.to/3JWXW86
Etching Primer - amzn.to/40KYGnx
20 Gallon Air Compressor - amzn.to/3QBxnqa
Great job guys and keep up the awesome work, from Trinidad and Tobago 🇹🇹.
Thank you we appreciate the kind words.
I came for the osha training lol
Let's go. We'll we are thw foremost knowledgeable experts on Osha for sure. Thanks for comment and support. Check out our other content
FYI, Isopropyl Alcohol is the best cleaner, it dries clean and leaves no residue. Lots of cleaners leave residue and you don't know until your paint starts peeling. IA is the only cleaner we use in aviation engine building.
Good to know. Thanks for the feedback, we appreciate the support and comment
🤣🤣 you guys crack me up!! I was thinking the 4 things would have involved a shop that does this...that's what I do!! PiTA job!!🤟
Thanks brother. We only wish we could convince 900k of your closest friends. Either way we appreciate the support
Thank you
Heck yeah thanks for comment and support
Love the video!!! planning on doing my Eddie bauer shortbed here soon!!
Heck yeah it super simple. Thanks for the comment and support
Great job guys
Thanks brother. We appreciate the support
Great job for a retired graffiti writer🎉
Well thanks I think. We appreciate the support
Looks great!
I assume same steps as a roll on liner, do you think the spray gives better coverage?
Thanks, brother. That's a great question. Unfortunately, we don't know since we have never done it.
I think that rolling it on gives better coverage as far as mils but spraying it on looks 10 times better. The key is getting mad coats on. I'm talking 4-8 coats. The thicker you came get it the stronger and longer it will be.
Have a link where to buy it from?
You guys are great -btw!!
Here is the list of everything we used with links. Let us know if you need anything else.
Black Raptor Liner HERE!!!! - amzn.to/3jdgELW
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
Painters Tape - amzn.to/3qnQQ34
Painters Tape and Drape - amzn.to/3eDlBhV
Adhesion Promoter - amzn.to/3JWXW86
Etching Primer - amzn.to/40KYGnx
Good video entertaining
Thanks for the kind words and for watching.
Can i leave leftover raptor liner in the bottle or will it harden?
Hey brother thanks for comment. If you mixed the hardener it will be trash good luck.
@@JMRRebuilders that's what I figured, thanks
I havnt seen many bed liner videos but yours is the first one i have seen that was right i have never used one of those brushes always used a red scuff pad and sand paper or wire wheel on the rust but im hoping to try rhis products this summer to paint my E150 super want to do the hole out side in a really dark green so i can name it mean green killing machine. Its something i have been wanting to do for a few years now just eather to broke or working too much i herd u mention changing the tip do they have tips to make it spray smooth thats something i have been looking for have tried other products thined down with my hvlp spray gun that has 2 tips onw for latex typ paints but still have to thin them a little bit every time i try a bed liner to see if it will work i have to thin it so much then put like 20 coats and it is never as strong as with a regular gun that sprays the rough pattern any suggestions would be great loved your video good to see some one that knows what there doing!!!!!!!!!!
Hey brother, first off, thanks so much for the kind words. We truly appreciate it. About the gun there are different things you can do it is a vari nozzle so spray patterns change. Also the presure setting changes it too. I love the idea of painting your van. We painted the exterior of our excursion. Did it for under a grand. Here a video to that let us know if ya need anything all links are in description
ua-cam.com/video/21QIAW2w814/v-deo.htmlsi=KGLvl9MesccmUN-Q
Thank you very much going to check out the video. I have a 85 E150 exstenda van and a 99 F250 super duty been wanting to put the 2 together for the last 5 years I have the time now I can't work as much as I like because of a triple aortic disections I had feb1 this year so I'm thinking it's time still need to get argon for my cheep Tig and probably several more 2bl spools for my wire feed but my buddy owns the storage I have them at and has no problem with me doing it there going to keep the van rear end for show until I can afford to make it truly 6 wheel drive but a couple adapters and another pair of 170 lug rims lol and it will look the part lol thank you very much have a good day!!!!!!!
??? quick question please... could u tell me if a small/medium sized kobalt 20 gallon air compressor would have the stamina to operate the spray gun? ...offhand, i dont know the cfm ratings on the compressor... thank u
Honestly I don't know but if it's what ya got then it's what ya got. It will run the whole time i imagine. So good luck and thanks for the comment and support
@@JMRRebuilders & thank u sir
It will work I seen a guy spray it on with a little pancake compressor believe it or not
Where can I buy the grinder attachment?
Thanks for the comment. Here is the link and good luck.
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
Why not bully dog adhesion promoter
Cause that junk is crazy expensive. Thanks for comment homie
@@JMRRebuilders expensive is in the eye of the beholder
Like regular guy attitude
Not sure I understand thanks for comment and support
Yeah that stuff will stay under your nails for over a week
Yeah man it loves to stick. Thanks for comment and support.