Anybody doing this seriously should invest in a small spot welder. They start at $9 and i recently bought a $24 one which does everything. You need it for strength, better connections, resistance to heat, etc. There is no excuse to not buy one.
There are many cheap spot welder from china, they work very well. But you forgot about the power supply for the spot welder which should use high amps battery such drone battery with C rating of 30C and above or can use Car battery. And they doesn't cheap for poors. In our country they sell high drain lipo battery for around $45 (in our currency ofc) and cheap spot welder let say $9 already need to spend $54 in total including the battery for power supply. $54 is so expensive for some country like us. The value of $54 in our country is above 100.
@@Bobsmith-yf9oy I am sorry if you're not agree, but as long as you're are not soldering the batteries for "too long" it is okay to use solder.. Only for 1 or 2 second. That's why need to use a good solder and flux to do it quickly. Especially if you only an hobbyist that doesn't produce batteries for mass production, it is too expensive to buy spot welder when you rarely use them.
Yesss!! I'm lovin' it! That charging boards are very clever and durable. I have two of such DIY cases with exact this board. The power of the DIY cases will be, that the Li-Ion cells has not need to be soldered because there are to be installed as same as you install AA or AAA alkaline batterys in a TV IR remote f. e. So i become able to change the cells easy and quickly every day when i want. 😊 Best DIY Powerbank board since ten years. Never seen similar that is better or can more than this one.
My one friend used ltihuims to build himself a new 12 v battery . Cant remeber for what project. He also used bms as well. To someone that doesnt know and pay attention. It will look like the normal 12v type of batteries commonly used in house alarms and gate motors. Yet the battery is now lighter in weight and its more effecient than before.
You can buy boxes designed to hold multiple batteries and have brackets, connrcting strips, pcb mounts, etc. Nice plus inexpensive. They make your work look very professional. Invest in one.
@@Bobsmith-yf9oySpot welder itself is cheap, but the power source you need to run the spot welder is expensive such high drain lipo battery, car battery or power supply that have an ability to provide high amps for the spot welder to work.. But if someone who have used car battery it still can be cheap but not everyone have it.
can you tell me what are these ingredients and where to buy them since i wanna build myself some powerbank😅 edit:like what's the name of the metal you used to connect the battery,the cabel,what's the name of that circuit and where i can buy those,for boxes maybe i can search myself some cardboard😊
Can. I charge my phone with one cell only ?? It charges for 10 seconds only then stops charging and the screen and give that my battery is 0% Despite that if I put a led USB light or used the internal light , it operates fine
@@TARIQLAB I measured it, it was 4.1 as volt If the mAh is small, at least it should last for 3 or 4 min ... At the same time I am charging a normal phone not big one device.
There we will be a maximum, based on current capacity of output wires plus the most cells the charger can handle. But with bigger batteries, thicker wires, and heavier charger, you can scale upwards elmost endlessly.
My phone battery is 5000mah , how many batteries can I modify on the 10a board and are there other board that can allow me to put more batteries I want a power bank that can charge phones up to 4-6 times before charging the power bank y@@nestormaciel6963
Anybody doing this seriously should invest in a small spot welder. They start at $9 and i recently bought a $24 one which does everything. You need it for strength, better connections, resistance to heat, etc. There is no excuse to not buy one.
Plus heat harms your batteries. I repair battery packs and wouldn't consider solder as a fix. Not even temporarily.
@@Bobsmith-yf9oy can u send me some links to buy much appreciated
There are many cheap spot welder from china, they work very well. But you forgot about the power supply for the spot welder which should use high amps battery such drone battery with C rating of 30C and above or can use Car battery. And they doesn't cheap for poors. In our country they sell high drain lipo battery for around $45 (in our currency ofc) and cheap spot welder let say $9 already need to spend $54 in total including the battery for power supply.
$54 is so expensive for some country like us. The value of $54 in our country is above 100.
@@Bobsmith-yf9oy I am sorry if you're not agree, but as long as you're are not soldering the batteries for "too long" it is okay to use solder.. Only for 1 or 2 second. That's why need to use a good solder and flux to do it quickly.
Especially if you only an hobbyist that doesn't produce batteries for mass production, it is too expensive to buy spot welder when you rarely use them.
С таким умищем нихера уже не надо...
Yesss!! I'm lovin' it! That charging boards are very clever and durable. I have two of such DIY cases with exact this board. The power of the DIY cases will be, that the Li-Ion cells has not need to be soldered because there are to be installed as same as you install AA or AAA alkaline batterys in a TV IR remote f. e. So i become able to change the cells easy and quickly every day when i want. 😊 Best DIY Powerbank board since ten years. Never seen similar that is better or can more than this one.
What name diy case you bought? Link please
Woah, these type of battery with parallel connection are better that enclosed power banks because, they are not expandable but these are!
Yes, but total capacity should be under power bank module limit
My one friend used ltihuims to build himself a new 12 v battery . Cant remeber for what project. He also used bms as well. To someone that doesnt know and pay attention. It will look like the normal 12v type of batteries commonly used in house alarms and gate motors. Yet the battery is now lighter in weight and its more effecient than before.
@@TARIQLABpls share 65w output power bank module details
Yo quiero una parecida pero de 3 en serie y que mientras esté conectado algo pueda ser cargada al mismo tiempo, existe eso?
You can buy boxes designed to hold multiple batteries and have brackets, connrcting strips, pcb mounts, etc. Nice plus inexpensive. They make your work look very professional. Invest in one.
En Argentina no llegan dichas cajitas. Y tampoco llegan si las compras afuera. Te las retiene a aduana.😢
Why aren't you using a little 12V spot welder for the battety connections? They start st $9 and there are multiple really good reasons to use them.
You harm the batteries with heat and can never get a great connection. Don't do this!
@@Bobsmith-yf9oySpot welder itself is cheap, but the power source you need to run the spot welder is expensive such high drain lipo battery, car battery or power supply that have an ability to provide high amps for the spot welder to work.. But if someone who have used car battery it still can be cheap but not everyone have it.
Sir parallel me agar ham bms na lagaye to v kam chal jayega kya ??
Lower Max current. Subtract 2.5A per battery if I'm not mistaken.
Please can you give me the link for the board u used here 😢
THIS IS GREAT 😊
Redmi A1+ ko charge krne k liye kaun sa module le.
2amp ka module thik rahega is phone k liye?
Koi bhi power bank module lag jaye ga
how much ampier it generate and it support fast charging? or warp charging
10A, this is normal module, u can use fast charging capable module
Almost unlimited with heavier duty batteries charger's and wiring.
Bro powebank se ham 5v ka bulb jla skte hain na koi blast wlast to nhi hota na ?
Jala sakty hain
Bhai jalana kyun hai
Use krna hena ?
Sir is the meter thing available on online purchases or hardwares?
U mean board
@@TARIQLAB yes yes
Yes online available
Kya ye module 10000 mah ke 2 battery ko support krega
Yes
can you tell me what are these ingredients and where to buy them since i wanna build myself some powerbank😅
edit:like what's the name of the metal you used to connect the battery,the cabel,what's the name of that circuit and where i can buy those,for boxes maybe i can search myself some cardboard😊
Circuit is , power bank module for 3.7v battery 10A, batteries 3.7v lithium ion 18650
thank you so much,but for the cable maybe i can search for it
Needed: 70 18650 cells, x3 powerbank modules, an LPG tube
That is amazing 👍
भाई पवार बैंक की प्लेट ये कितने की मिलती है कहा पर मिलती हैं 🙏❤❤
Online
@@TARIQLAB भाई किस पे से मगाते हो
Bro bms module how many ampere pls reply
10A
@@TARIQLAB ok thanks bro
Which is that PCB board, from where we can get it
Bro ye module ache se work karta he mtlb 4000 mah mobile ko full charge karlega
Karta hai , 10000 mAh ki capacity hai is ki
@@TARIQLABactually me dusra digital powerbank module order kiya tha but wo 20% charge karne ke baad band ho jata he
Amperes kam honge
@@TARIQLAB ok bro thanks but iske internal resistance ki vajjhe se ye jaldi battery ko down to nahi karega na
2200 x 7 = 15400mah ??????😢
With 2800 cells which are extremely common, this is possible. Even 3200 cells are common
Is this kit supportd 40000 mah battery??
How much limits in mah this kit??
10A module, max 10 lithium ion 18650 battery, 1A for 1 battery, if u use 20 batteries then charging time will reduce to half
@@TARIQLAB battery mah ????????
@@TARIQLAB I have 2.1A module
Is this supportd 40000 mah???
Can. I charge my phone with one cell only ??
It charges for 10 seconds only then stops charging and the screen and give that my battery is 0%
Despite that if I put a led USB light or used the internal light , it operates fine
I think ur battery is weak
@@TARIQLAB I measured it, it was 4.1 as volt
If the mAh is small, at least it should last for 3 or 4 min ... At the same time I am charging a normal phone not big one device.
Please you tell me , where's the buy the link!?
Online available, AliExpress, Banggood, TEMU
How many mah battery can added with a module. Is there any limits
Charging Capacity of this module is 10A so we can connect 8-10 batteries,
There we will be a maximum, based on current capacity of output wires plus the most cells the charger can handle.
But with bigger batteries, thicker wires, and heavier charger, you can scale upwards elmost endlessly.
Bro, can this board charge 6 batteries 🔋in parallel (2+2-2+) 11.1V, or do i need 3S board
It can charge up to 8 batteries but in parallel, it is only for 3.7v not 11v
Which module is being used here?
Power Bank Module 10 A
Mere ko ye wala 2 battery Lena Hai kitna price hoga
100, 300 ka mil jaye ga
What's the name of the board u used?
Power Bank Module 5V 3.7v battery 10A
good idea
Thank you
Fast charging spot hai to hoga ki nahi🤔🤔🤔🤔🙏🙏
Support karta hai
Jo aap use kr rehe ho in ka nam batao Jo part hai
Power Bank Module 10A
What is the board name
Power bank module 10A
Для себя собрать ради прикола можно. Но цена 1 банка~500р*6=3000р. И к тому-же 2650mA*6=15900. Есть смысл собирать?
Clean explain tion good job
Ty
@@TARIQLABfor this no need to add bms board,?
Pcb board milega send karte or give me link online shopping
Online milta hai
Temu
Where to buy this circuite? Link
Local market or online
1000 years to charge it fully
no, es de carga rapida, yo tengo el mismo modulo con 35000mah
My phone battery is 5000mah , how many batteries can I modify on the 10a board and are there other board that can allow me to put more batteries I want a power bank that can charge phones up to 4-6 times before charging the power bank y@@nestormaciel6963
good
Board konsa hai
Power Bank module bro 4 volt 2 ampier
What moduls ?
Power Bank Module 3.7v 10A
How to circuit name.
3.7v battery 10A power bank module
How to charge?
Through module
Price
Module price $3
Materials needed: 16 rechargeable dynamaxX AA batteries powerbank 3 port x2 modules
Those are not AA batteries, those are either 18650 or 21700 cells. Voltage is different
How many watts?
20W
Where is the battery charging point?
Micro usb near usb port
flash motherboard chip?
Price kya hai
300-400
How we can recharge this power Bank
With this module
Can we connect more than 7
Upto 10 but will charge slowly because our chargers are 3Amp max
Im prefer use polymer battery
Aiysa wala muja bye chaiya tha
But the voltage is very low
Ye Jo kit lgai hai iska name kya hai
mobile Power bank module
I see no plants but a weeping fig would be nice.
How i can buy this power mobule help share me low price power module
Online, AliExpress, Banggood
Where is the cell balancer circuit?
Balancer required when batteries in series
I like video your❤❤
Thank you ❤️
what is the name of board and type
Power Bank Module
Battery ke upar Jo lga hai uska name kya hai
Power Bank Module
Jis Patti pe solding kiye hai wire ko plus minus par
Nickel strip
Nickle wire hai bro 😊@@OppoA3s-u7e
No need bms?
Need
chargeing circuit please
He showed you, he's using a USB-C vharger, same as I would. They're roughly 4 for $10.
Selamın aleyküm abi burda kullandin kartın linki varmı varsa verirmisin bende yapıcamda
আরো বেশি করে দেন
সার্কিট এর দাম কত
200Tk
❤️👍
Welcome ❤️
Plz spare mension
Power bank module 10A
Ya full change katna din ma hota ha😂
Kiyu bhai, ye module 10A ka hai 2-3 hour main full charyho jata hai
Micro USB se 10A 😂😂😂😂
Sorry you don't know how dangerous is this. You don't have any protection either a BMS. Please do not try do this thing
I use power bank module which has built in 10A BMS
How can this simple 18650 cell be 2,857mah? 🤔
This can not be a 20,000mah powerbank 😐
Why, 1 lithium ion battery available in 2200, 2500, 3000 and 3500 mAH, multiple by 7
@@TARIQLAB I know. but this cells is not look like 3000mah...
Are you sure this is the original 3000 mah battery?
It's not 20k
@@utkarshsingh1223 but he mentioned it 20k mah.
@@Mukul_Adhikary Maybe 2800, then it's close to 20000 if they are new, but this aren't new cells.
ဆရာမောင်တီထွင်အားပေးလျက်ပါ
ခဲဂေါက်ကပူပီးခဲအရည်ပျော်ပါတယ်ဒါပေမယ့်ဂေါက်မှာမဆွဲပဲပြုတ်ပြုတ်ကျပီးခဲတွေကဘယ်လိုဖြစ်ကုန်လဲမသိဘူးဘာကြောင့်လဲခဲမကောင်းတာလားတခြားအပျက်ထဲကခဲကိုတို့ကြည့်တော့စွဲတယ်ဆရာ
Ciao, potrei conoscere la sigla del cip?...grazie
What's the song name?
ভাই সার্কিট পাওয়া যাবে
অনলাইন উপলব্ধ
❤
♥️♥️
Hello bhai
Yes
This is not 5 volt
What u think?
Es que ! c est justifiée ! le nombre d accus ! pour recharge un téléphone !! voilà voilà
BMS...
10A
CAN ANYONE RECOMMEND THE BEST MODULE FOR A 10,000mah Lipo battery ??🙏🏽🙏🏽🙏🏽🙏🏽
same question
Deva is name
JMD 24
Слабая плата...
ဆားကပ်ပြားဝယ်လို့ရလား
Вау это чудо чудесное😂
Idiot! It's ordinary electronics and not miraculous.
good