Вставка
- Опубліковано 31 тра 2024
- This video shows the teardown of two Russian sensors. The first sensor is not a part of an Iskander missile but of a X-101 missile.
00:00 - Intro
00:25 - Optical sensor from X-101 missile
02:30 - 3-axis Fiber Optic Gyroscope (probably from Tornado MLRS)
Links
A picture of the first sensor with the optics:
photo.unian.info/photo/117351...
Several viewers have found the technical documentation of the Fiber Optic Gyro:
www.optolink.ru/documents/trs-...
Other information concerning the FOG:
en.defence-ua.com/industries/...
Technical documentation in russian:
ela.kpi.ua/bitstream/12345678... - Наука та технологія
I don't know why people were complaining about your english, it's better than a lot of people in the U.S.A ! keep up the great content, it's extremely interesting and unique!
better than my French of German! We - the USA - are not the center of the world, folks.
for real though
I can't understand anything that black people say in Bushwick, New York.
I understood them just fine
His english is great -welshman
First looks like an infrared seeker from either an Igla or Verba (probably Igla). It's a rolling airframe missile so the fact that it's a linear array of infrared sensing elements makes more sense than in an Iskander. The missile "rolls" at a relatively high rate (900+ RPM) and as it rolls it's building a virtual image from the rolling action of the missile
This was a common technique with early "4th generation" surface to air systems that were prior to the ubiquity of the larger 128x128 or 56x56 focal plane arrays you see in more modern imaging missile systems from the early 2000s and didn't require as much processing power and techniques like this were a lot cheaper and production volume ready than true larger format FPAs in the late 80s and 90s.
The same technique is applied in the US Navy RIM-116 except it also includes a pair of inline interferometers for RF detection/fusing against radiating targets like active seeker anti-ship missiles. The RIM-116 also has a much better linear array; 80 elements in a 80x1 focal array.
wow the airframe rolls at 1000 rpm !
so that's a refresh rate of about 16 Hz.
it probably does some interpolation between frames.
still shocked that an airframe would be rolling at that speed.
if the missile is not centripitally balanced, it would be doing a cork-screw through the air.
I'm by no means an expert, but the rest of the components don't look like from these 4th gen SA missiles. They look way too modern. Why would you use old sensors but modern SMD boards?
@@user-lb8bg6kj9m I've seen some open source documents that put the RIM-116 rotation rate in the 1000-1500 RPM ballpark and videos I've seen of the test rig for the seeker subsystem have it spinning at a very high rate, easily 20+ revolutions per second.
@@txm100 Partial modernization of older systems is pretty common as manufacturing techniques improve while you maintain the original system design. Largely because the testing and verification of weapons is extensive and time consuming. Upgrading too many things at once or changing core operating principles (even if the end result in the same) is generally seen as requiring repeating previously done verification and test programs because you've effectively built a new system.
For this example, upgrading amplifier assemblies is easy to verify and show that it won't change how the core system works or functions, but replacing the seeker with a full-format FPA and a totally different digital imaging system is not equivalent and why you see old technology persist in either its existing flavor attached to new subsystems or in slightly different flavors as manufacturing techniques improve.
Designing systems and building them is the easy part, the hard part is test and evaluation and making sure it works as close to the system goal as possible 100% of the time.
@@billyjoel22359 An underrated comment. Any time system processing is changed in a non-trivial way, there are also security risks - not just information leaking but also software or hardware injection. I've heard that this is a bad enough problem in civilian space, to say nothing of this.
Thanks MIchel for this very interesting content! From your previous video I understand there were some complaints on your English, but I find it very clear and comprehensible. Some of my coworkers are much harder to understand!
It's the most stereotypical French accent and I love it :)
Its sad that we are nearly at 2024 and some people haven't figured out how to use Closed Captions.
@@continental_drift
I was Literally going to say the same thing.
@@continental_drift I know how closed captions work, but the situation has to be very bad to make me bother to go click on a thing. Realistically I have the phone/laptop on a shelf and doing the dishes or soldering stuff or installing software on another computer while having the clip in the corner of my eye.
It’s perfect froglish.
The big micro chip is definitely not from a vacuum cleaner. Few things need a gyro. Definitely mil quality. Phase modulator can also detect angle of approach. Beautiful, I used to have a job designing that stuff when I was a younger man. Those connectors are very expensive. Silicone is also used for vibration suppression. That thing must be subject to extreme vibration at the speed it approaches. Thank you, it was very interesting. It is a bit more modern than when I was in defence research in the mid/late seventies, where angle of approach and speed was measured using Doppler radar.
A bit more modern? that's a good one, probably from the early 80's.
Optical or not, it's still an inertial gyro. So, the entire board can only do the one thing.
It's a math exam..."I want to know my velocity." "Well, Sir, we can only know velocity if we measure velocity over a span of time." "Do we know my velocity yet?" "No sir, we only know what your velocity was. It isn't possible that your velocity is that any more." "Then why did you bother to calculate it?" "Because you are the boss Sir."
*Summary*
- *Intro*
- 0:10: Received two packets from Ukraine.
- 0:13: First packet from Kiev, second from Dnipro.
- *Optical Sensor from 9M727 Iskander Missile*
- 0:29: Optical sensor, part of a Russian Iskander missile 9M727.
- 0:48: Contains 16 photocells, likely infrared photodiodes.
- 0:55: Bonding wires are missing.
- 1:01: Four identical PCBs, each with four amplifiers.
- 1:24: Central part connects 16 signals, likely with a single output.
- 1:53: Ceramic IC, Russian made, dated 2004, possibly encodes the 16 signals.
- 2:09: Plans to reverse engineer and possibly restore the sensor.
- *3-Axis Fiber Optic Gyroscope (probably from Tornado MLRS)*
- 2:45: Three-axis fiber optic gyroscope, likely from a Russian missile.
- 3:37: Contains a roll of fiber optic using the Sagnac effect.
- 3:44: Connected to an infrared LED. (Superluminescent LED DL-CS5153A, 1550nm, 40nm FWHM, 10..35mW, DenseLight, InP fab in Singapore)
- 4:04: Measures light delay due to rotation, using a coupler and phase modulator.
- 4:19: Phase modulator compensates for delay caused by Sagnac effect.
- 4:48: Circuit includes three ADCs and three DACs.
- 5:18: FPGA board from Altera, Cyclone II model.
- 5:28: Board removed from assembly, wires cut.
- 6:15: Plans to reverse engineer and possibly test the device.
- 6:00: Noted missing components, possibly power supply.
- 6:05: Temperature sensor observed.
- 6:30: Intends further investigation and reverse engineering.
- *Conclusion*
- 6:31: Thanks viewers and anticipates a future video about the sensor.
*Summary of top comments as of 2023-12-30*
- Some commenters debate the origin of the optical sensor, suggesting it might be from an Igla or Verba man-portable air-defense system (MANPADS) rather than from an Iskander missile due to the rolling airframe missile design and the type of infrared sensing elements used. A few commenters express doubt that the first sensor is from an Iskander missile, with one noting that Iskander is a ballistic missile and would not have an infrared seeker.
- There is a discussion about the use of older sensor technologies with modern circuit boards, with one commenter explaining that partial modernization is common to avoid extensive retesting while maintaining the core system design.
- One commenter identifies the chips on a PCB as output isolators, suggesting specific models and noting the data path from the FPGA to these chips.
- A detailed identification of a chip is provided, including its code, pointing out that it is an Altera/Intel FPGA.
- There is a mention of a fiber optic gyroscope potentially being made from low-cost optics, with admiration for its construction.
- There is an observation about the continued use of PTFE insulated wires in the designs.
- Several comments note the reliance on Western components in Russian military electronics, with some expressing amazement that no domestic components are used and others remarking on the obsolescence of certain parts.
No washing machines had been harmed in the production of that rocket.
Selfmade chaff
@@TheLittleDeath1😂10/10
I was not aware that FPGAs were used in washing machines, as Ursula Van Der Crazy assures us ;)
Yes yes in washing maschines and in toilets, sure 😂😂
Reusing components for production is not practical.
@@otofoto Tell that to the un-elected EU technocrat who clearly confuses a spin cycle and media spin ;)
@@henryyoung7184reported
@@henryyoung7184 In her defence most in EU clearly couldn’t understand why TerroRussians are stealing washing machines and toilets. The concept is so alien that such ideas come up.
encore des circuit que l'on ne voit pas ailleurs, c'est fou ... un grand merci pour le partage c'est toujours un réel plaisir.
Excellent. You obviously have very good sources.
I once was involved in the early fibre gyroscope development as an engineer way back in the 80's .. gotta say I'm impressed with this Russian version . Looks very well made and the block diagram shows very advanced processing
Very impressive, thanks for sharing 👍🏻
Thanks for these wonderful videos.
very interesting teardown, thank you very much, sir
The first sensor looks a lot like a midwave IR spectrometer sensor. These used ferroelectric BST crystals mounted in a linear array. The light source is chopped blanked or otherwise moddulated.
IN laymans term please ..LAYMANS term 🙂🙃🙂
So that would mean it's used to target on laser-painted targets?
IR > Heat seeking ; or Heat imaging (like FLIR) ?
The optical sensor is probably from a dryer to sense the wet clothes. And the gyroscope from a washing machine to sense if there are vibrations or so.
Разбаланс в стиральных машинах определяется не по акселерометрам, а по величине пульсаций напряжения на обмотке таходатчика на двигателе. После амплитудного детектора измеряется АЦП и определяется величина разбаланса
@@0_741ну ты секреты-то сразу не выдавай - секрет починки стиралки, это тебе не головку самонаведения разобрать, это дело серьезное!
Almost, the gyro senses the rotation of the washing drum.
@@BertoldVdb There have to be enormously easier ways to do that!
Сатира@@0_741
Perfect work. Thank You !
Invaluable just to see the high shock electronics packaging. Thanks for sharing.
Без МГТФ ни одно изделие не обходится :)
и гребаные винты под плоскую отвертку
Меня убила платка с одной 591КН3 которую запихнули чтобы была хоть одна российская радиодеталь. Куча проводов и стеклянных изоляторов чтобы одну хренову микросхему мультиплексора в DIP корпусе присобачить. Запросто могли на одну из платок усилителей запихнуть в SMD корпусе. При том судя по датам на платах, 591КН3 минимум 10 лет на складах провалялась.
Вот почему Россию считают отсталой почитайте ваши комментарии и западные ! Вы будущее России ? Нет война идет чтобы таких малограмотных
мы больше в нашей стране не производили ! Привет из СССР
не, оно работает, и это главное. но меня смущает компоновка оптического датичка (четыре наполовину свободные платы усилителей, а внутри на отъ..ись мультиплексор в дип корпусе, к нему веер практически не уложенного одноцветного мгтф'а) и в целом толщина текстолита. да, я разводил платы под многовыводные смд компоненты, да, я знаю, что ее однослойной сделать нереально, но кмон, почему у двухслойной платы толщина такая мелкая? такое ощущение, что это тот же текстолит, на котором я дома всякие поделки собираю.
умели же делать нормально, достаточно посмотреть на советские военные изделия: толстые платы, прочное шасси, где надо, чтобы не было путаницы, вместо мгтф'а стоит мс какой нибудь и прочее, прочее прочее.
ну, либо это я дурак и чего то не понимаю)
не забывайте про гиперзвуковые скорости и ускорения. Это не смартфон.@@woopsserg
the last frames show places with missing details. There are traces of thermal paste left. It can be assumed that there were electric heaters that, together with temperature sensors, provided thermal stabilization
Thanks for the educational resources 🙏
Awesome video thank you
Michel, you're in the same region of ebay as I am! I was eyeing these to tear down after I had hands on time with them in Kyiv earlier this year.
That FOG is from the TORNADO MLRS, I tore down four while over there
Thank you for the information regarding the FOG.
@@lelabodemichel5162make a video anti tank missile teardown special request
do you have some videos as well? it's quite interesting to see what's inside
I thought if it was Russian ..Houston we have a problem .. looks very advanced
@@danobrien3601 it could be foreign ICs and sensors assembled and/or lacquered by russians
Nice video - an interesting glimpse into military electronics, and a nice comment on Western-Russian military industrial complex.
Very cool! Beautiful hardware.
well done! thank you for the video.
Fascinating! I’m sure to follow your channel! Curious if these parts were expensive. I recently discovered the practical use of FPGA boards (I’m an hobbyist) and was recently explaining to my wife how well suited they are for robots (which a missile in essence is.. ) Thanks for your content! 👍😊
I'm curious, did your wife appreciate it?
5:45 - EP2C8Q208I8N - Cyclone 2 (EP2C), 8k LE (8), PQFP-208 (Q208), industrial temp range (i), speed grade 8 (8)
Yikes!
I hope Altera didn't actively help Russia develop their missiles....
Hope it will not help anyone
@@whatsmyusername1231 That is a very old FPGA design (going back to 2005 I think). So available for a long period before sanctions. Really need to see the manufacturing date code to see if it was actually imported by bypassing sanctions.
@@lindsaycole8409 as a Russian engineer, I will tell you that sanctions do not work, Analog Devices, National Instruments and much more are freely imported into Russia not only through friendly countries, but also directly :)
@@dimchan9096 Yes, be much easier to control machine tools and their parts and consumables than 50 dollar FPGAs. Commercial FPGA and general purpose CPUs can do everything you want to these days. Not like the 80s and 90s where sophisticated weapons needed high-end specialist asics.
Very interesting! Thank you.
Thank you for that. Very interesting.
5:44 The correct code for chip in center is "EP2C8Q208I8N", Cyclone II Altera/Intel FPGA.
Pretty old one !
@@MrPopelwhy use the newest if old works as well
@@marcusaurelius3487 Because the old one are runing out of stock.
Nice build quality. Parts are indeed not sourced from microwave ovens.
This gyroscope unit is used in the Russian Soyuz-TMA spaceship and also in the military missiles. It costs over $20K.
Must be from washing machines. Ursula said so and she is so very smart.
This one is from washing machine
@@rdengin главное верить! Ведь телеящег не врёт!!1
@@rzhevsky4934А ВВС ....точно не врет.
Very interesting! Can you draw shematic of the amplifiers from the seeker?
you are amazing Keep uploading videos
The first sensor is very interesting!
1550 MN Superluminescent led diode made by Superlum in Ireland
I respect your knowledge.
Nice work. 🙂
Very interesting! You know, I think it would be nice to try to get one of those decoy dart missiles that come out of the iskander.
Annoyingly hard to find, trust me I tried to buy one while there but no dice.
One wonders if we could start a tiktok thing for influencers to go catch them...
@@joeds3775 they might trip on UXO. wouldn't want that on your conscience
Ага, видимо кому захотелось стать мёртвым😂😂😂 "добыть захотелось ложные ракеты"😂😂😂 смешно, да.
@@jenix102, я далек от темы ракетного вооружения, но мне интересно, что за "приманки" выпускает Искандер и почему их так сложно достать
super la vidéo 👍👍
good work!!
Great video. 👍
Salut Michel selon ton avis c'est une conception moderne selon leurs capacitée ? ou c'est un montage vitement conçut et peut précit ?
Military equipment does not require modern technology. The most important thing is reliability. There is a lot of gold on the board.
very interesting, please continue
Great work
Very cool!
I doubt the first infrared sensor is from Iskander indeed. It is likely to be from one of the Russian surface-to-air manpad, like Igla or Verba.
Yes, the ring at the bottom seems a mount to the airframe, and it is far too sub diameter for iskander.
Also the construction technique looked more like something for lower cost systems.
То что блогер с 20-тью тысячами подписчиков получил в распоряжение часть искандера - несусветная чушь сама по себе.
Вообще, надо сообщить, для тех кто не в курсе - Украинский и Российский ВПК работали бок о бок до середины 2010-х годов, на протяжении 90 лет (со врем образования СССР) и поэтому на Украине полно компонентов используемых в российском вооружении производимом со времен СССР, но КОНЕЧНО не в последних образцах вооружения, которые уже разрабатывались или модернизировались в России в 21 веке. с оглядкой на тот факт ,что украинцы продадут какие угодно ВАШИ секреты, и не важно 0 друзья вы их, или вы их враги.
@@u666sa not at all. And I have quite a bit of exposure to military electronics.
It looks like commercial spec construction, almost from a drone or something like that. It is definitely not from an Iskander.
@@VasiliyLomovoy ты чета не совсем понял... жители Северска жалуются царю что у них совсем плохо с врачами. и записали челобитную. ты забывши совсем что золото в ракетах - это нищета пенсионеров. нищенские зарплаты и просрочка у Пятерочки. твое фуфлогонство на теме убийства славян засчитано.
4:34 Part number is МИОМ-001 - ends with "ОМ" which is indeed may be "optical modulator".
The official name is "Multifunctional Integrated Optical Module". The stuff inside includes more than just the modulators. This is one of the most critical to the performance of the entire gyroscope components. The know-how of the manufacturer is precisely in these optical parts, while the electronics, as we see here, is built with the ordinary off-the-shelf components.
These gyroscopes are (or at least were until recently) sold internationally, and a rather detailed information about them is openly available. Although the manufacturing is done in Russia, the company is actually half owned by foreign investors.
Its cyrilic so not exact 😊
@@teodor4ik183 In Cyrillic the abbreviation will look the same - Многофункциональный Интегрированный Оптический Модуль - МИОМ :)
Bonjour, merci pour la vidéo, j'ai tendu l'oreille tout le long, mais je n'ai pas entendu combien il y avait de spires sur chaque bobine de fibre optique. Est-ce que vous avez pu le déterminer ?
Non, c’est impossible à voir, l’ensemble est noyé dans un genre de colle pour la stabilité.
Chaque bobine contient 500 mètres de fibre optique. Donc, environ 2000 spires, à peu près.
Thank you for making this interesting video. Your English is fine, it is the world’s most common second language so there is a lot of variation in accents and thus it is normal to encounter it spoken imperfectly yet effectively. Cheers and happy new year to you!
Very unlikely that you got an intact part from an Iskander, which is ballistic, and therefore moves at several times the speed of sound. Besides there's no infrared seeker in Iskander.
Thank you. Iskander is 100% Inertial + GLONASS guided
But that doesnt mean it has no other sensors..@@BlazinEmperor
@@txm100it does mean exactly that. IR seekers are used on air to air or surface to air missiles to seek out heat signatures - helis or planes engines. Iskander is air to surface and surface to surface missile, it doesn't use IR targeting
You are completely right, he mentioned above that the seller told him it was from a different missile
@@iansysoev9462Нет. У крылатой ракеты SS есть наводка по ИК на подлете к цели. Чтобы ракета видела тепловую сигнатуру (корабль, танк, здание) и сравнивала с образом в ее памяти. Для точного наведения на цель. Это значительно улучшает кво.
It would have been interesting to see the optics in front of the linear sensor.
Unusual way of making the gyro. We use different techniques in aircraft avionics nowadays, using prisms instead of optical fibre.
Fibre can move and vibrate causing jitters to the data rate.
Imagine a police car siren coming towards you with a loose mounting for the siren. The tone wouldn't be pure. Same kinda concept.
Оптоволокно не свободно. Оно находится в компаунде. Оптоволокно изотропно по длине. И это дешевле, чем использовать призмы, для которых надо еще сварить изотропное стекло.
Fiber cannot move. It is filled with compound. The optical fiber is isotropic in length. And this is cheaper than using prisms, for which isotropic glass must also be welded.
This is super cool.
Very interesting!
I would bet you Michel, that the missing parts were taken off on purpose. SOMETIMES to much information can be a hindrance from victory on the battlefield. But that is only an assumption and not a fact. I like the videos fella. JOB WELL DONE !!!!
5:44 At the bottom right corner above the ADC the header it look like a JTAG header. It will be intresting to see if there are any kind of fpga configuration eeporm where the bitsteam for the FPGA is stored. I'm sure that even if exists it's content is encrypted.
Merci beaucoup d'avoir partagé ces démontages avec nous.
This is usual FOG, which are commercially available, i think there are no incredible interesting things inside.
One of nearby SOIC8 chips is EPCS - the special Altera chip to store FPGA config.
FPGA config data isn't typically encrypted. However reverse engineering the config is very time consuming (although it shouldn't be), as each bit of data is simply enabling latches in the logic structure.
It's just logic after all...
Can we reverse engineer all pcb boards or with extreme difficulty without the original software ?
Is it just them cheaping out on a custom design or do we use standard FPGAs in such components too?
You do. Javelins are FPGA-based.
А эта микросхема в какой стиральной
Машине стоит?
Украденной в суржикстане!
@@78RSI не украденной, а трофейной.
@@user-py3rl3zf6x Даже не трофейной, а присоединенной.
На этой стиралке изнacиLOVEали ни одну аксанку😂
В бюджетоотмывочной
Altera is originally a US company and was bought by Intel in 2015. To this day, despite sanctions, Germany still supplies electronic components to Russia or has them produced there. Similar or almost identical parts can be found in Ukrainian rockets of the Tochka-U type. Originally from Russian production.
I have a friend from Russia who works at a factory producing such microcircuits, somewhere beyond the Urals.
В россии нет производства микросхем западными фирмами. Автомобили западные собираются, но микросхемы нет. Только русские.
@@sirdm90321:55 590кн3 Светлана, Санкт- Петербург. Рядом с финляндией😂
Je suis bleuffé par ta capacité à récupérer ces composants sensibles, bravo !!!!!
Who selled this, how and for how much?
Thanks for touching this important topic. Of course, FPGAs are not taken from fridges or washing machines. They get delivered to Russia, Iran and other countries.
плис делали еще в ссср. обидно что в мире считают что у нас в России немогут делать электронику. Я как бывший работник завода который делал электронные компоненты скажу, у нас упор идет не на уменьшение и быстродействие а на надежность. Я лично принимал партии компонентов после изготовление и каждый элемент из партии проверялся под микроскопом. Да это дорого и энергоемко , за то на выходе получаются приборы которые могут пережить огромные ударные нагрузки и сохранить параметры.
FPGA chips are manufactured in Russia, look for Google 5578TC094, for example, so everything has its time, perhaps in the next review, when Misha will disassemble the next block from the rocket, we will see it there.
@@user-qv4fo6xp2wсовок в электронике был лютым говном. Рашка может клепать разве что отсталую военку.
@@user-qv4fo6xp2w зараз використовують 40нм процес, це хіба з електронним мікроскопом сидіти ггг. І ці плати рашка купує з-за кордону
@@user-qv4fo6xp2w I've never heard of "Altera Cyclone II" being made in the USSR.
Interesting to see, that there is no single domestical part, its all powered by intel and analog devices...
it is even "funnier" if you know that some custom parts aren't even made in russia
Altera were good stuff back in time before Intel bought them and became piece of overpriced shits. Same happened to Xilinx.
"Borrowing" technology by Russia/USSR is already a tradition. They are a few years behind in development and they put Western/Chinese silicon structures in their ridiculous housings - true. But in the end, they effectively create a deadly weapon and kill innocent people with it. This is what they are really good at and this is their true nature.
and probably most are fabricated not in the West, but in China
@@dsfs17987 would not be surprised if it's made by jlcpcb or similar service.
Ok, thank you.
Super intéressant
What kind of washing machine they are taken from?
Стиральные машины не нашли?
Bro, where does he source this stuff from?
😮good content ,🎉🎉
The IR sensor seems too specific in purpose to see much use and probably needs some special lens to go with it, but if the ring laser gyro has enough resolution that would be a neat piece of kit to back-engineer and have working on some kind of RC aircraft or drone. (Also wasn't the RLG something the U.S. shared with Russia as part of the agreement for joint operations in space? It's kind of funny to see it put on a weapon not long after they had access to it.)
его достали из ворованного тостера с украины
@@domovoy_sych777а тостер произвели в китае по технологиям северной кореи... которые ей подарили русские в 1970х...
fibre laser gyros drift long term but a missile flight is not long term .. minutes
90 % of russian weapons made by US/UK/France ...
so great work...
Is the iskander the one that was targeting toilets?
Interesting!
Michel, ça te dérange pas de montrer ton adresse comme ça ?
il a masqué l'adresse du vendeur, mais pas la sienne. Ce gars est solide comme un rock.
@@AIexanderHartdegen C'est un total gigachad, qu'on se le dise
Exactly the same sensor I have seen inside my washing machine
Where did you bought all of these?
Там где полно всякого барахла валяется.
0:19 "calculator part" Yea that is a correct description.
Thank you. Very interesting video. Also it seems i understand French!
Amazing the chips they put in washing machines these days...
if they don't get the right shape of anything in there the design is fucked so if you deny a voltage regulator it will fail
Fiber optic gyro with three axis of sensors measuring the pitch, yaw and roll the three plans of flight control.
hello friend. Can you also get kamikaze drone Shahid 136 UAV parts for teardown?
Ммм, родной мгтф
Сейчас такого нет, хороший провод, изоляция температуру держит не хуже силикона и прочнее
А вот и зеленоградцы подтянулись!
@@andreiminin4738 В смысле нет? Вон на авито и прочих барахолках его полно. Можно новый напрямую с завода заказать.
@@andreiminin4738 В магазинах навалом, хоть на озоне заказывай. Любой калибр, что есть по госту.
КТО ТО ЖЕ НАРУШАЕТ СТАБИЛЬНОСТЬ. КОМУ ОНА НЕ НУЖНА. А ТУТ ДЕЛО ДОХОДИТ ДО ТЕХНИЧЕСКИХ СРЕДСТВ. КТО ОБЕСПЕЧИТ?! ГЛУБИННАЯ НАНАЦИЯ ЗЗЕВАЕТ, КРОМЕ КАК РАПРЕССИЯМИ ТИХУЮ ГАВАНЬ НЕ ОБЕСПЕЧИТЬ. НЕ ОБЯЗАТЕЛЬНО ГНАТЬ НА КОГО ГЛАВНОЕ ЗНАТЬ, ГДЕ ДОВЕРЯТЬ НЕ СТОИТ. ЧЕМ. НО КОГДА НАДО КЕМ НАДО ПРЕДСТАВИШЬСЯ, С КЕМ УГОДНО ДОГОВОРИШЬСЯ И ЧТО УГОДНО ДОСТАНЕШЬ. ИБО НЕТ ЦЕНЫ ДОПУСКАМ КОГДА ПРИНЦЫПЫ НАРУШАЮТСЯ, НАЧИНАЯ С МОРАЛЬНЫХ И НА ВСЕ-ПРО-ВСЕ ВЫТЕКАЮЩИЕ. И НАПОСЛЕДОК: ВИБ ПРОБОВАЛИ ЭТО КЛЕПАТЬ, А НЕ С ДИВАНОВ ТРЕНДЕТЬ.
Это контроллер от стиралки Индезит?
Индезит отстой.
Это Вятка - автомат!!!
@@user-km8nf7fc4gперемычку только вытащить, чтобы ток пошёл на плисину побольше, и тогда активируется военный режим работы (последний пуск)😂
Фсе идеть по плану, стирать в проруби.
why is the second board looking like it is covered with resin! is that for protection or did they just leave the soldering oil or flux on after manufacturing???????
All military PCBs in Russia are covered by acrylic or silicone resin for moisture protection. Soldering flux is removed by cleaning in appropriate liquids - isopropanol, deionized water, etc. Be sure we here have the best production equipment that Europe, USA or Japan can suggest :-D
Au vu des outils actuels, vous pourriez essayer les voix AI sur une transcriptio .
0:37 "iskander" is a ballistic missile, not cruise missile.
Искандеры бывают баллистические и крылатые
@@user-bj9yi2wp7m так аффтар обозвал её крылатой, притом на картинке баллистическая 723-я, а речь идёт об обломках 727-й из Днепра
@@user-bj9yi2wp7m не бывают
"Искандер - М" - применяет баллистические ракеты, "Искадер - К" - крылатые из пускового контейнера.
@@user-bj9yi2wp7m "Искадер - К" применяет старые советские крылатые ракеты Р-500. так что это другая ракета.
Hopefully the Altera part wasn't supplied directly by Intel!
intel inside 👍
and apparently outside too.
First of all, there's no evidence that this was Russian manufactured. Secondly, these chips have been sold, resold and even cloned in various parts of the world for a while and the fact that it's an FPGA likely means it was used instead of a dedicated chip which could have been in short supply during those years when this unit was produced, perhaps even from spare parts left in a former Soviet state. I'm sure nobody uses FPGA parts these days because Russian military production has been steadily investing in domestic IC manufacturing capabilities as any nation deemed antagonistic by USA justifiably would.
@@ufukpolat3480 no. Russia has absolutely zero IC factories. Everything is imported.
@@cantorgaussну тут вы не правы. Есть они. Только конечно не для гражданки. В бизнес и военным делают. Скорее мелочевку не делают.
@@cantorgauss No. Вас обманули. В России около 10 заводов производящих микросхемы. Первая русская микросхема была представлена в 1964 году.
Thank You for this evaluation of the missal fiber optic giro part, [ I wonder how many are either, US or Eurepin parts ]
Stop listening to the BBC and CNN. Russia has been producing all this itself for a long time.
Where did you get this electronics from?
Did you listen to him? He said those parts are from Ukraine, they have plenty of that stuff because Russia attacks them almost every day
@@MegaTraxxas These parts are in very good condition, it does not look like they have been subjected to any explosive effects on them.
@@cogoid I don't think that Russian missiles don't have a self-destruct system, well why would Russia give out its technology? I think that this electronics is not from Russian missiles.
@@user-fd5yl3ez3j of course it's from a wash machine
UA-cam should require all videos to include at least one kitty.
If you do not see a cat in a given youtube video, it's because he's busy controlling the camera.
LOL!
Yep!
золото и платино содержащие детали отправители cпиzдили :)))
Awesome! Your English is fine.
Merci!! Analog device and Altera in Russian missile sensor....
It seems like they are still using their classic PTFE insulated wires
So does everyone else. Here in the US I use mil-spec silver plated PFTE insulated wires in my own work. They aren't that much more expensive, and you can't accidentally melt PTFE with a soldering iron.
PTFE insulated wires, such as MIL-W-22759, are still the aerospace industry standard.
Makes sense. PTFE is pretty robust stuff well-suited for the coldest and hottest climates everywhere on earth. Don't want your wire insulation become brittle when stored for a few decades in some unheated storage in Siberia. And it has good dielectric properties too (so no need to use something else for HF applications).
If it wheren't for the environmental issue (the stuff is known as a "forever chemical") PTFE would be used for everything everywhere. It's just such a good material.
@@Oktokolo speaking of which, I probably need to replenish my stocks before they ban it.
@@medved3027 how do you strip them btw?
I see they have been Cat Scanned 😂
Inspected, found nothing not known by cats. 🔬👨🎓🐈🐾
Surprised first item isn't potted in conformity to resist high shock loading and high G input.
❤❤❤
Ich bewundere die konzeptionelle Reinheit
If you send a lot of money to a ukrainian, he will send you a "Sarmat"... 😂
And he will arrive under his own power😂
@@passerbyworld no, no, for own power need ask us for it... 🙂But we don't know how to lie so skillfully, everything can be real...
Subscribed
1:55 591кн3 - analog of HI-506, Harris Semicoductor Corp. 16-in 2 way multiplexor to 1. +-15v, 1mA consumption. Producer "Svetlana" Saint-Petersburg (S) - vaccuum tube, tranzistors, ics for genereral purpose n defence.