Wow! Still tinting in the Stone age! Easy tip! Slightly pull back the door panels and remove rubber weather stripping.. Film drops into wide hole not touching anything, install film, slightly wet rubber weather stripping then slide rubbers back in. Push panel back into door! No Brainer! Tinting since 1982
Heyy bro you are definetley one of the CLEANEST installers on youtube, im 25 and ive been Installing for about 6 yrs now, so i kno the trade relatively well, n by the looks of your work i can tell for sure you do as well!! Keep up the CLEAN work my friend...
Nice. That guy did a good job. Pretty fast with the back window too. I just tried to tint a charger back window. It was tough. It had multiple lines on the top.
Yes....Cause they are not as curved as back windows...But not all door windows are just the bottom....Like Corvettes for example you have to shrink the top of the door as well....Also some others...
i have some adhesive looking stuff under my tint in my back window. the car just got tinted yesterday. will that clear up over time? its weird cuz you cant see it from the inside but the outside looking in you can!
Whats a good heat shrinking tempo? Cause i can't seem to get this heat shrinking down... I've wasted alot of tint already always getting creases and wrinkle... I've just started tinting last week. From california
i hope it goes away. he said he would retint the window if needed. i hope its not some adhesive he missed from taking the old tint off to put this new tint on. the car was already tinted when i bought it so i had him take it off and tint the windows darker. its only been about 50 degrees here the last 2 days!
Music reminds me of the late 90s, gay clubs, circuit clubs, full of circuit boys, dancing, rolling on ecstasy, with a can of red bull, at 600am....Not that I would have had any personal experience with that.
Its not as hard as you think...Of course it is when you first try....But if you got some common sense and read about it on Tintdude or just watch videos on here its pretty easy...I am all self taught and have been doing this for ten years....
We all use the same method for the most part but we all have own variations of it....like the back window 95% of us all dry shrink it like him....We all don't apply the film the same to the window like him...I reverse roll it on to the back window not franky it... watch here for reverse roll....
7. you tint enough to invest in a piece of glass for a transfer/final cut board. quit doing your final cuts on the glass. you're teaching people mistakes.
thisisjustplainstupi this video teaches the jack legs that i deal with everyday that can tint cars for $40. then i have to listen to my workers bitch about having to take shitty tint off that said jack leg installed on a car. subtract jack legs= good tint jobs. = less shitty removals. these videos make people do it themselves and in the end are creating your own competition. Colby.
matthewj2006 Sounds like your workers are little bitches, I'd get some new guys who have a better work ethic. Gotta take the bad with the good, ya know. Last I learned, monopolies are pretty bad for the market and the consumer. You should probably thank said jack legs for educating the customer on what bad tint jobs are, so that they can come to you and pay you, including the extra removal fee, Matthew.
1. you wasted so much film. 2. you wasted so much time. 3. that window doesnt need heat shrinking. 4. that gasket pulls in 3 seconds making for a cleaner install not having to deal with fingers coming back. 5. quit
Wow! Still tinting in the Stone age! Easy tip! Slightly pull back the door panels and remove rubber weather stripping.. Film drops into wide hole not touching anything, install film, slightly wet rubber weather stripping then slide rubbers back in. Push panel back into door! No Brainer! Tinting since 1982
Thank you a video if they're really being helpful and for all those haters why don't you show me what you got
Heyy bro you are definetley one of the CLEANEST installers on youtube, im 25 and ive been Installing for about 6 yrs now, so i kno the trade relatively well, n by the looks of your work i can tell for sure you do as well!! Keep up the CLEAN work my friend...
great video.. i been doing the steps over and over in my head trying apply in right order
Nice. That guy did a good job.
Pretty fast with the back window too.
I just tried to tint a charger back window.
It was tough. It had multiple lines on the top.
Matt, great job as usual.. Did one today, tough car to do!
I don't even tint windows yet I'm fascinated at watching him do this!
Thank you for all your video
Yes....Cause they are not as curved as back windows...But not all door windows are just the bottom....Like Corvettes for example you have to shrink the top of the door as well....Also some others...
i cant keep from getting the fingers coming in from the sides before shrinking the rear... how do i stop this???? please help!!!!!!
What was tht stuff he sprayed on the tint in the huge bottle before he took the tint off the window to put it in the inside window
For the back windows, do you cut on the inside or the outside of the dot-matrix along the edge?
seems like alot of water going in to the doors does that ever fuck up any electrical motors switches etc? also does everyone use that same method?
i have some adhesive looking stuff under my tint in my back window. the car just got tinted yesterday. will that clear up over time? its weird cuz you cant see it from the inside but the outside looking in you can!
Whats a good heat shrinking tempo? Cause i can't seem to get this heat shrinking down... I've wasted alot of tint already always getting creases and wrinkle...
I've just started tinting last week.
From california
Excellent video.
You only heatshrink the bottom half of the door window?
How you deal with the thick defroster line.
i hope it goes away. he said he would retint the window if needed. i hope its not some adhesive he missed from taking the old tint off to put this new tint on. the car was already tinted when i bought it so i had him take it off and tint the windows darker. its only been about 50 degrees here the last 2 days!
What is the solution you use to wash windows? Is it the same that u use to keep wet during install?
how much does this cost. i have an 09 charger and want the same thing you just did. how much does that go for?
Awesome video. Helps me a lot. What type of film did you use in this video?
Excellent JOB MAT ! You are the best tinter ! :))))
how long did it take to do the whole car, real time?
Can you give me the name store ...i need buy the paper...👍
hi in time 2:20 in video u have fehler or not can you explain please?
from tinting a lot of cars, what car would you get?
How long is it take you to tint the whole car?
HOW IS WORKING THE GUN WITH TINTED WINDOW?
@sherrynmoore Dont heatshrink the corner sides. and dont cut your tint too big
thanks for the lesson
@tintstuff tips on how to get a perfect bottom cut on the door windows...
6. this is porno music
Music reminds me of the late 90s, gay clubs, circuit clubs, full of circuit boys, dancing, rolling on ecstasy, with a can of red bull, at 600am....Not that I would have had any personal experience with that.
im just starting out tinting, and when you started did u screw up alot?! lol
Im sorry but I have always seen tint be applied to the inside of the window not the outside.. Is this something new!!!
watch the full video, he put the tint inside
how much would you charge for a job like this?
youre in michigan im in farmington where are u located like address
i'm also very nice good job
Too much water on the interior! Use less man, water ruins leather.
very nice!
U ever do a 745li bmw
Its not as hard as you think...Of course it is when you first try....But if you got some common sense and read about it on Tintdude or just watch videos on here its pretty easy...I am all self taught and have been doing this for ten years....
Where are you located? Can you tint my car?
We all use the same method for the most part but we all have own variations of it....like the back window 95% of us all dry shrink it like him....We all don't apply the film the same to the window like him...I reverse roll it on to the back window not franky it... watch here for reverse roll....
makes me sick to see inside doors getting soaked with solution
Kyle H have you brought your car for full details. They soak your interior with soap and water and then abstract it out
7. you tint enough to invest in a piece of glass for a transfer/final cut board. quit doing your final cuts on the glass. you're teaching people mistakes.
This guy probably hasn't ever tinted a window in his life.
He probably doesn't realize this video is from 2011 and that you work in a shop with glass boards and these videos are for do-it-yourselfers.
thisisjustplainstupi this video teaches the jack legs that i deal with everyday that can tint cars for $40. then i have to listen to my workers bitch about having to take shitty tint off that said jack leg installed on a car. subtract jack legs= good tint jobs. = less shitty removals. these videos make people do it themselves and in the end are creating your own competition. Colby.
matthewj2006 Sounds like your workers are little bitches, I'd get some new guys who have a better work ethic. Gotta take the bad with the good, ya know. Last I learned, monopolies are pretty bad for the market and the consumer. You should probably thank said jack legs for educating the customer on what bad tint jobs are, so that they can come to you and pay you, including the extra removal fee, Matthew.
1. you wasted so much film. 2. you wasted so much time. 3. that window doesnt need heat shrinking. 4. that gasket pulls in 3 seconds making for a cleaner install not having to deal with fingers coming back. 5. quit