Right?? I can’t wait to get to the track, it’s going to make an incredible series! Thanks for the continued support, really appreciate the watch!! Cheers
Nice starting point for the interior setup and nice fab work on the seat slider. You should get yourself a wink 5 panel Rallye mirror. They're nice and I used to run one in a couple of my mk2 track cars. The flocked dashes are nice. The process of flocking is easy and satisfying. There is a nice kit that they sell to do the job. I ran all Autometer guages in my last mk2 12v AAA VR and loved them. I gutted the stock cluster area and used some lexan to make my own guage pod holder panel. I put two large cutouts for the tach and speedo and two smaller ones for the fuel and water temp guages. For the radio panel I ran a triple piece with the oil pressure, Wideband and voltmeters. Worked and looked nice. As far as the belts I used the Schroth 4 points religiously in a ton of my builds. They're great and with a harness bar they fit perfectly. You can even use the stock attachment points with confidence as long as your sheet metal is in good condition. Nice work with the MSD coil conversion. Makes a huge difference in performance and reliability over the OEM VR coil pack. They are probably the most drawback to the VR ignition in general. The Ford Windstar coil swap is better than OEM too as long as you isolate the mounting, wire up the ICM portion correctly/ make your plug wires right. Much better spark than the expensive crack prone OEM pack. Great job.😉👍
Awesome video bro 💪 keep going strong. Also, great work in sourcing out a garage assistant. She looks like she knows her way around tools. Good help is hard to come by these days. #CutenessOverload
Nniiiccceee!!! I tried searching it and asking around but I got mixed feedback. So I planned incase I couldn’t but I’m ready if I can!!! Appreciate the support and thanks for watching!! Cheers
Great progress. Love the burn out at the end. Question though.... If your going drag car on this one why even have an interior??? Saving weight is the name of the game in drag racing. Keep the AWESOME videos coming
I want to still drive it comfortably on the road so trying to find a happy medium… but your right, less is more!! Stay tuned for more to come on this project, appreciate the support and thanks for watching! Cheers
Great channel great content. Mk1 drag car. Meh. Lost me on that one. Should be on the street looking awesome. Drag racing nothing but money and braking stuff. But good luck with it. 🤟
Hey thanks! I appreciate that this build may not be for everyone but I hope another build on this channel is! Plus this car will not be drag strip only, i will still be street driving it as well so it will be clean too. Appreciate the watch and thanks so much for the support!! Cheers
Nice, looking forward to see what times this mean mk1 put down. 👍🏼
Awesome work man that thing is a beast
Cheers! Really appreciate it!! Thanks for watching!!
Oh man! Can’t wait to see the track videos.
Right?? I can’t wait to get to the track, it’s going to make an incredible series! Thanks for the continued support, really appreciate the watch!! Cheers
what a legend
Hahaha thanks man!! Appreciate the support and thanks for watching!! Cheers
Love the videos always been a mk1 and mk2 fan
I appreciate that thank you!! Thanks for watching, really appreciate the support! This are awesome cars for sure! Lots more to come too! Cheers
Loved the burn out💪🏼💯💯💯😁
Hahahah I wanted to really get into it, but then my poor floor lol!! Thanks for watching, appreciate the continued support as always!! Cheers
Yes track videos!!!
Right??? Going to be a lot of fun for sure!! Stay tuned for more! Thanks for watching, appreciate the support! Cheers!!
Nice starting point for the interior setup and nice fab work on the seat slider. You should get yourself a wink 5 panel Rallye mirror. They're nice and I used to run one in a couple of my mk2 track cars. The flocked dashes are nice. The process of flocking is easy and satisfying. There is a nice kit that they sell to do the job. I ran all Autometer guages in my last mk2 12v AAA VR and loved them. I gutted the stock cluster area and used some lexan to make my own guage pod holder panel. I put two large cutouts for the tach and speedo and two smaller ones for the fuel and water temp guages. For the radio panel I ran a triple piece with the oil pressure, Wideband and voltmeters. Worked and looked nice. As far as the belts I used the Schroth 4 points religiously in a ton of my builds. They're great and with a harness bar they fit perfectly. You can even use the stock attachment points with confidence as long as your sheet metal is in good condition. Nice work with the MSD coil conversion. Makes a huge difference in performance and reliability over the OEM VR coil pack. They are probably the most drawback to the VR ignition in general. The Ford Windstar coil swap is better than OEM too as long as you isolate the mounting, wire up the ICM portion correctly/ make your plug wires right. Much better spark than the expensive crack prone OEM pack. Great job.😉👍
Awesome video bro 💪 keep going strong. Also, great work in sourcing out a garage assistant. She looks like she knows her way around tools. Good help is hard to come by these days. #CutenessOverload
Hahahaha ya shes know her way around a tool or two and she’s only 1 1/2, will turn into a solid hand when she gets older!! Appreciate it!! Cheers
"Imma jump into a time lapse to figure this out" lol - the vw mk1 multiverse
Hahahaha absolutely right!! Appreciate the support and thanks for watching!! Cheers
FYI, Slicks can 100% be used on Friday night mission street legals.
Nniiiccceee!!! I tried searching it and asking around but I got mixed feedback. So I planned incase I couldn’t but I’m ready if I can!!! Appreciate the support and thanks for watching!! Cheers
Great progress. Love the burn out at the end. Question though.... If your going drag car on this one why even have an interior??? Saving weight is the name of the game in drag racing. Keep the AWESOME videos coming
I want to still drive it comfortably on the road so trying to find a happy medium… but your right, less is more!! Stay tuned for more to come on this project, appreciate the support and thanks for watching! Cheers
Next video “Imma 4 motion the mk1 for drag racing.” God please make it happen 🤞
I would love too one of these days!! How awesome would that be!!! Appreciate the support and thanks for watching!! Cheers
1981 rabbit convertible firing order plz ? Do you check your comments?
Got you
How did it do with slicks at track?
Great channel great content. Mk1 drag car. Meh. Lost me on that one. Should be on the street looking awesome. Drag racing nothing but money and braking stuff. But good luck with it. 🤟
Hey thanks! I appreciate that this build may not be for everyone but I hope another build on this channel is! Plus this car will not be drag strip only, i will still be street driving it as well so it will be clean too. Appreciate the watch and thanks so much for the support!! Cheers