Brilliant video. Thanks very much. I called the dealer about fitting a tow hitch and electrics to my (new to me) 66 plate np300. They said it was a big job, they needed to remove trim in the cab, lift carpets etc.... thanks so much for posting this. I’ll install myself now. Best Tom
Tom White it’s all right glad it helped, I got the same when I asked them and it was going to be stupid money as well luckily I found a bit of time in harvest to fit it had only taken me the morning to do.
Well, I need to put in the Aeroklass Canopy Harness to get the 3rd brake light working. I also have this trailer control module, but i cannot locate the correct plugs anymore where to put in the canopy cables. Manual talking about a plug under the bed, near the rear bumper. So, there are now many plugs und sockets thank to the controller module. Which is the one for the brake lights to tap? :D Do you have a hint?
I wouldn’t know off the top of my head see if the wires are the same way for the brakes ie if they correspond the same as the seven pin so yellow, I think does the right indicator, green does left indicator see if they are the same into the module and you might be able to tap into that one. Obviously I think it is red, but you’ll have to look up online and see what it is for a 7 pin diagram just to make sure
Peter Vuleta very tired and full of pain killers I’m sure this was in harvest last year, so 100 hours a week and that was my only morning off in mouths lol.
Brilliant video. Thanks very much. I called the dealer about fitting a tow hitch and electrics to my (new to me) 66 plate np300. They said it was a big job, they needed to remove trim in the cab, lift carpets etc.... thanks so much for posting this. I’ll install myself now.
Best
Tom
Tom White it’s all right glad it helped, I got the same when I asked them and it was going to be stupid money as well luckily I found a bit of time in harvest to fit it had only taken me the morning to do.
Valve Springs all sorted. I bought the same set up as you. And fitted it in about 3 hours. Couldn’t be happier. Thanks again.
Great video mate. Where did you get the electrics from? Thanks
Well, I need to put in the Aeroklass Canopy Harness to get the 3rd brake light working. I also have this trailer control module, but i cannot locate the correct plugs anymore where to put in the canopy cables. Manual talking about a plug under the bed, near the rear bumper. So, there are now many plugs und sockets thank to the controller module. Which is the one for the brake lights to tap? :D Do you have a hint?
I wouldn’t know off the top of my head see if the wires are the same way for the brakes ie if they correspond the same as the seven pin so yellow, I think does the right indicator, green does left indicator see if they are the same into the module and you might be able to tap into that one. Obviously I think it is red, but you’ll have to look up online and see what it is for a 7 pin diagram just to make sure
Great video.Looking to-do exactly the same.
Any idea why it would trip the 4wd system fault 😡
No wouldn’t to be fair I never had faults with mine was plug and play. Should be a completely different system.
Just be careful on newer vehicles. Will probably void you warranty if you di it yourself.
This guy sounds drunk
Peter Vuleta very tired and full of pain killers I’m sure this was in harvest last year, so 100 hours a week and that was my only morning off in mouths lol.
Fair enough, was helpful, stopped me putting the wrong pitch bolts on my navara.