NISSAN EPS LEAK. HOW TO FIX IT! MUST WATCH BEFORE YOU REPLACE!!!

Поділитися
Вставка
  • Опубліковано 1 сер 2024
  • Nissan does not offer a rebuild kit for their electric power steering pumps. however with a little outside the box thinking you can fix the leaky pump.
  • Авто та транспорт

КОМЕНТАРІ • 30

  • @donbenson5292
    @donbenson5292 7 місяців тому +2

    Lots of money to do the same thing to Benz and the $1.96 shaped "o" ring on the water pump to the block. 1200 bucks in labor, 8.5 hrs.
    Thanks for the video.. have a friend with a 2013 Altima leaks.. Very good job! Theoretically!!! I have been wrenching for 60 years... good point on the silicon. Been doing that for years.

  • @haroldwaig2242
    @haroldwaig2242 10 місяців тому +5

    Nissan Part $3100.00 @ Dealership

  • @Fleetingsongs
    @Fleetingsongs 9 місяців тому +1

    Actually got the same problem w my 2011 Nissan Quest. My mechanic friend says its a common problem w Nissans since they use an electronic pump. He said just get the stop leak power steering fluid & it should stop it. I bought Fram Stop Leak+ Power Steering fluid & the leak improved. Now I notice about 1 drop of fluid on the cardboard I placed under the car every few days. I'm fine w that.

  • @rickxs619
    @rickxs619 Рік тому

    i will be doing same thing. later today thanks to your Vídeo 🙏

  • @ahmednail1562
    @ahmednail1562 7 місяців тому

    Great job boss

  • @sciencedunya
    @sciencedunya 10 місяців тому

    Can you show how you removed the unit. I am trying to do it at home and will really appreciate it. I cant seem to find out how to disconnect metal (pressure hose) that goes inside the unit on top. Do I use wrench to open it up?

  • @leosg1980
    @leosg1980 2 місяці тому

    Do you need to purge air from de system when you reconnect the hoses and add new fluid?

  • @darinbarfield8738
    @darinbarfield8738 7 місяців тому

    Thanks,
    Just noted a leak on my daughters 2013/14 Nissan Altima-
    Was searching for the location of the power steering pump,
    Her serpentine belt had just broken,
    So I thought the pump was belt driven,
    But I noted the drip from bottom of reservoir,
    So I’m hopeful it’s just an O-Ring issue like this.

  • @MrSamPhoenix
    @MrSamPhoenix Місяць тому

    Nice fix

  • @JR-tv2pl
    @JR-tv2pl 5 місяців тому +1

    I have the same issue but i just found a repair kit online at best parts web,for the pump for an altima 2013 for 37.99 dls

    • @JR-tv2pl
      @JR-tv2pl 4 місяці тому

      Let me give you an update,i received de repair kit and i just replaced the o ring for the plastic housing and it quit leaking oil,i didn't have to replace the rest thank God, so im happy for that cause i have a busy life

  • @MrPhongtranq
    @MrPhongtranq 6 місяців тому

    We had the same problem with our 2016 Nissan Maxima, we used the Prestone Max Power Steering with Stop Leak seems to work and stop the leaks, it's been 3 months now and the fluid level is still good. Very informative and good video btw, if mine is still leaking afterwards then will look at replacing the seal but the problem is where to find that same o-ring.

  • @marshmower
    @marshmower Рік тому

    LV mercon or toyota WS / Castrol universal CVT fluid might work in a pinch. Smells like transmission fluid in that EPS

    • @marcsmith3881
      @marcsmith3881 4 місяці тому

      You are going to take a chance with a pump that is over 2K new? Craziness!

  • @IrwinBaldivia
    @IrwinBaldivia 9 місяців тому

    Is this pump similar to 8th gen nissan maxima? I have same problem. And the parts is too expensive 😢

    • @gautorepair
      @gautorepair  9 місяців тому

      Yes should be very similar

    • @IrwinBaldivia
      @IrwinBaldivia 9 місяців тому

      May i know which car model have same o ring? 😊

    • @gautorepair
      @gautorepair  9 місяців тому +2

      In not sure. What i did was remove the oring and took it to a hydraulic supply store to match it up

  • @CuongGiang-ez4ov
    @CuongGiang-ez4ov Місяць тому

    I not know what size but I go Amazon I types my car model and I get o ring

  • @TheFmendoza2929
    @TheFmendoza2929 Рік тому

    Do you have a part number that you can share to find that o- ring

    • @gautorepair
      @gautorepair  Рік тому +3

      No. Picked it up at a local hydraulic supply store

    • @joeydelmarsjr.646
      @joeydelmarsjr.646 Рік тому

      weather is AutoZone or a supply store they all have a part number name or manufacture or reference number

  • @user-wq2uh6wf9e
    @user-wq2uh6wf9e 8 місяців тому

    oh by the way oh by the way there are 2 of them good luck it work fro me

  • @izahrowland2387
    @izahrowland2387 Рік тому +2

    What size is the o ring???

  • @2ndAmendmentedYoAss
    @2ndAmendmentedYoAss 5 місяців тому

    Nissan states to only use their fluid for everything, transmission, coolant, psf.

  • @Mr.CBriggs
    @Mr.CBriggs 5 днів тому

    The dealer price is almost $8,000 SMH

  • @user-wq2uh6wf9e
    @user-wq2uh6wf9e 8 місяців тому

    go to a hyadlic shop and buy one thats what i did

  • @quesstar2600
    @quesstar2600 2 місяці тому +2

    Two things missing: 1) Details on removal / reinstall, and 2) SPECS OF THE ORING!!! Otherwise, decent job.
    The idea of using just any old oil is high risk. There are plenty of replacements for factory oil, but just anything? Using a ring with the wrong compound can cause problems as well. It can swell. It can shrink. It can deteriorate and plug up the system. I also have been wrenching for over 50 years. Don't do a half A__ job. Get the right materials ( ie, Viton, not Nitrile ), unless you want to do it all again later.

  • @CuongGiang-ez4ov
    @CuongGiang-ez4ov Місяць тому

    I not know what size but I go Amazon I types my car model and I get o ring