Eeeeowww! I'm impressed. REALLY impressed. You know what? I was thinking exactly the same thing. This is surely some kind of crazy 21st century Avro Vulcan bomber. When I was a child, these things used to fly low, incoming for landing RIGHT over our house.. Standard RAF camouflage for the upper surfaces and black for night or duck egg blue underside for day bombing threat. Superb flight and landing. Our whole house used to shake!! I loved to watch them, but they were terrifying! Got to see this flight one more time.. Eeeeowww!!! Shower gel investment also has clearly payed off.. Well done chaps! Big salute as ever from London.
Nothing like a good hand toss early in the morning. Excellent wido and the landing was excellent as well. New batteries should always come from factory on storage charge - 3.80 - or there abouts.. I always cycle new ones several times just to wake them up and make sure the cells all balance right. Thanks again - Russ NC/USA
Another fantastic video! Thank you so much for sharing this with us. The Delta Strike is the Best!!!! Y’all do a great job . Such fine gentlemen doing a grand service for us. From TEXAS. USA 🇺🇸
Listen to that turbine whistle! Top Gun, High wayyy to the danger zone! That bird is cool! Cool factor 9!!!! Just hand launch and go fly. Lots of nose up? Cool...I likes it!
Look at Dis. OH YEAHHHHHHH 😘. 2 and this Old Man from North Carolina always enjoying early with my coffee ☕☕☕☕. Another awesome small plane. Capt Blaz great video. Do love me some Brothers. ✈️🧔💝💝💝
What a great little EDF and a very efficient EDF to get 3 minutes out of a 1400mah battery is really good 👌 it also looks super cool in the air and for an EDF it's pretty quiet too 😁👍
Ooh neat looking plane Nice flying, smooth slide landing That cross section is chonky lol, everything looks blended well For CG I found wings that have big rear taper farther back cg and vice versa eg. planks/FSW CG shifts forward If possible glide test into brush I think I would put stripes or dark paint on the bottom just for orientation ha
Day glow green or orange, paint, Captain Blaz. I think Hobby Lobby, Michaels, Hobby Town, hobby shops sell the day glow acrylics/tempra paints, I bet you could keep those smaller planes in the video picture if you gents had the day glow paints.
Nice job guys , It does look like the space shuttle , I must have near 100 lipos now , I check all my new batteries close and charge anything lower than 40 % to make sure they are ok and will accept a charge , Most companies are still recommending several cycles before reaching full potential on them . The only bad lipos I have had were Venom and /or Flyzone . Even all the cheap no name batteries I have over the years are still mostly good but have low C ratings compared to almost everything newer and what I like to have in my planes . I use the low C old ones for surface cars or rock crawlers now .
@@PetrincicBrosRC I have a lot of brand new ones too in stock as spares . I haven't treated my lipos very well . LOL , But have had pretty good luck . The E-flite batteries are one of the best IMO but they are expensive . and not a lot of size choices. The new Spektrum smart batteries are nice quality too and for me here in Canada , they are very competitively priced compared to the 'offshore' stuff . A bunch of my new 6 cells are ZOP power , they seem good so far and are a bit cheaper than some brands
Great flight Robert! This is a very cool fpv edf.I would love to see you fly something fpv one of these days.Captain Blaz the Master in the Shower,lol! Great job recording this Blaz! A salute to my brothers!👍🏻👋🏻✌🏻
Thanks Don. Maybe I will really get my FPV experience soon. One company wants to send me FPV quad with all you need in one box. Also for beginners. Sounds interesting.
I've yet to have a delta or flying wing that I added a little up trim for level flight before the first flight that I didn't have to immediately have to trim down for level after the launch. Properly balanced the hint of up trim is negligible. However, upon handlaunch the natural instinct is to pull back on the elevator. Needing to push forward is a real hassle. At the elevator to neutral, launch and if you need s click or three of up elevator for level flight it will be no big deal. Having to lean on the elevator while finding your trim for some reason is much much worse.
Hi guys, andy in UK. This is so weird as you are getting different results from myself. I have been flying mine a lot this week and it balances perfectly with the 65mm cog using a 2200 4s zippy compact, with the battery not even all the way back. How strange. I am using the cog marker they have provided on the underside of the wing. Also my hand tosses have been really easy using 70 percent throttle and using the three holes provided with a gentle toss. You must treat her like a lady though and only put one finger in each hole otherwise she sticks to your finger. Happy flying. Andy in uk.
Very weird.. could it point to a different EDF unit in yours? .. or perhaps far lighter lower C lipo's? Might be worth comparing lipo weights, these Graphenes are one of the heaviest out there.
Very nice woeeesshhhjjj when passing by, the little EDF seems pretty well balanced. I like it and the flare at the landing was awesome!! Sadly my eyes are too bad for these small planes and I tend to lose orientation on them. Maybe a gyro or SAFE would be beneficial as emergency helper.
The delta is really sexy. I have always loved them. I have arrows viper with 50 mm fan, fly on 1500 3S, top speed 91 mph with total regular flight time of 5.5 minutes, full throttle 3 minutes then lower power.
On second viewing, seen from above this really does look like a Vulcan.. In camo paint job it would be pure sex in the sky! Perfect landing. You could even paint the closed undercarriage doors on the underside. Another huge salute from London. Yaroo, you chaps!!
I actually have the perfect motor fan for this plane...i just have to retire my old beat up j power screamerit would do 100 mph easy with a 4s 1600 50c...
Vidim da ni noben povedu. Turnigy graphene, te prve ki so prišle 2017, so bile znane da so jim ful pogosto posamezne celice crknile. Nobody told you yet, these first Turnigy graphenes that came out in 2017 were known to have cells dying faaaar too often and too soon.
Shapely and well thought-out parcel shelf EDF. What I don't like: No signal color for better attitude recognition and ridiculously lame despite great shape.
@@PetrincicBrosRC, thanks very much! By the way: I think your video about the model is the best thing I've found on UA-cam - like many of your other videos. I've been following your channel for a while with ups and downs. I have the impression that you are on the rise. Unfortunately, the euro has lost a lot of its purchasing power as a result of the pandemic. There have never been such good finished models as now. But when I see that models I bought in 2019 are now twice as expensive, it's sad. Therefore, my interest is now inevitably more in the area of accessories and tools. It is becoming more and more interesting for me to construct and build beautiful models myself, as I did in the seventies to nineties. But now with CAD and CNC support. It's worth it again. I am currently designing a Art Chester Jeep specially adapted for an NGH GF-38cc 4-stroke petrol engine. I bought this new from HK in September 2017 for just under €264. It now costs €380-400 new from old stocks at German dealers and over €400 for imports from China calculated without customs! Outfitting and building models with more local materials saves money and is more sustainable. For example more poplar wood than balsa wood or GRP/CRP directly from local manufacturers. Many small but very good German manufacturers have had to give up in recent years. But the pandemic has shown Germany that the domestic economy needs to be strengthened.
@@arminmuller5990 Crazy times my friend like you said. The prices are really high these days. Lets hope all will be like it was soon but I do wonder if that will ever happen. I was dreaming that I could make a living from this hobby, filming planes and maybe have my own hobby store but its just not working. I did open my company again and I will try to survive and put food on my table. But I will always dream like I was dreaming that someday me and Blaž will film reviewes of the RC planes. Iam still having the time of my life now.
Bonjour from the UK. Great Maiden flight Captain Robert and Great Filming Captain Blaz. Thanks!.
Hey Peter. Thanks for stopping by here.
Thank you. I really appreciate all the time and effort you two put into in making these videos. You guys are my favorite.
Its really not easy but we love it and hope to do it also in the future my friend.
Eeeeowww! I'm impressed. REALLY impressed. You know what? I was thinking exactly the same thing. This is surely some kind of crazy 21st century Avro Vulcan bomber. When I was a child, these things used to fly low, incoming for landing RIGHT over our house.. Standard RAF camouflage for the upper surfaces and black for night or duck egg blue underside for day bombing threat. Superb flight and landing. Our whole house used to shake!! I loved to watch them, but they were terrifying! Got to see this flight one more time.. Eeeeowww!!! Shower gel investment also has clearly payed off.. Well done chaps! Big salute as ever from London.
What I would give to see one in real my friend. And it will be dream came true if someday someone will release one.
Glad I've found you guys 😀😃
You can always feel like at home here with us my friend.
Yes that's cool , see I'm a carpenter and recently broken my foot , so after seeing your tiger moth this is what I building now thanks to you guys 😀
I'll load the build up etc shortly on my UA-cam
Zohd makes great stuff! This looks like another winner.
I really like their birds.
Nothing like a good hand toss early in the morning. Excellent wido and the landing was excellent as well. New batteries should always come from factory on storage charge - 3.80 - or there abouts.. I always cycle new ones several times just to wake them up and make sure the cells all balance right. Thanks again - Russ NC/USA
I woill do the same in the future my friend.
Salute and thanks for providing the good contents!
Big salute back my friend.
That was a tough one to film!!
It was Lauren. But Blaž did great job again.
Another fantastic video! Thank you so much for sharing this with us. The Delta Strike is the Best!!!! Y’all do a great job . Such fine gentlemen doing a grand service for us. From TEXAS. USA 🇺🇸
Thanks for such kind words Phil.
That floated further on landing than I thought it would. nice!
It really did my friend. Like some glider.
Listen to that turbine whistle! Top Gun, High wayyy to the danger zone! That bird is cool! Cool factor 9!!!! Just hand launch and go fly. Lots of nose up? Cool...I likes it!
It sounds fantastic my friend.
Beautiful plane and noise..... Ohhhhh yeah!
Pretty good my friend.
Now that's some smooth flying !
Captain Blaz has mastered tossing with his daily practicing . Thanks brothers !
😂
He is really one shower master now 😉
I can't not use sunglasses. There a must if I fly my rc stuffs.nice landing..
I cant use them also. Dont feel good with them when flying RCF planes.
Great flight! Great bird!
Look at Dis. OH YEAHHHHHHH 😘. 2 and this Old Man from North Carolina always enjoying early with my coffee ☕☕☕☕. Another awesome small plane. Capt Blaz great video. Do love me some Brothers. ✈️🧔💝💝💝
Hey John. Its great little flyer for sure.
The Delta Strike would be great for FPV, decent price. Enjoyed the video Robert and Blaz, thank you, Big Salute Jeff in LA USA
I really hope to test FPV one day my friend.
very good maiden, well done to you both
Thanks Julijan.
Nice flying my brother and great filming it fly's nice and that landing was perfect.👍
Thanks Andrew.
Great zooming Capt Blaz! Big Salute from mid Mich! No snow? Well, you can use the magic carpet! ALERONS!
I wonder if we will have more snow this year. It doesnt look like that for sure. And I still have skis on Habu 😊
Superb 💯👍
Thanks P.
Not at all into EDFs but I'll non the less watch your videos start to finish.
Thanks for that Bill.
These guys crack me up.
Iam really happy that you are having good time here with me and Captain Blaž.
Well done with the landing. Really like the look of this. You both did well, hard to see in the sky. 👍🏻
Wasnt expecting that my friend. Great bird for sure.
@@PetrincicBrosRC Need some bright stripes on her 👍🏻
what a smooth landing ! I thought that it was going to be just a low pass with turnaround .
I was surprissed my friend.
What a great little EDF and a very efficient EDF to get 3 minutes out of a 1400mah battery is really good 👌 it also looks super cool in the air and for an EDF it's pretty quiet too 😁👍
Really not bad. And I was also surprissed how quiet it is.
Nicely done
Thanks Larry.
A salute from pilot Peppers in Seattle to my crazy pilot friends.
Big salute back Pilot Peppers.
Ooh neat looking plane
Nice flying, smooth slide landing
That cross section is chonky lol, everything looks blended well
For CG I found wings that have big rear taper farther back cg and vice versa eg. planks/FSW CG shifts forward
If possible glide test into brush
I think I would put stripes or dark paint on the bottom just for orientation ha
Great thinking Jacob.
Day glow green or orange, paint, Captain Blaz. I think Hobby Lobby, Michaels, Hobby Town, hobby shops sell the day glow acrylics/tempra paints, I bet you could keep those smaller planes in the video picture if you gents had the day glow paints.
Great thinking my friend.
excellent
Thanks D.
That edf has a great jet sound..
Thank you for another good video.
Thanks for your support Paul.
Well THIS was pretty cool! NIIIIIIIIIIIICE! 😁👍🛩
Not bad my friend.
Great flight Capt. Blaz is truly the master of the hand toss but that low sun is tough.
Oh he really is 😉
It's a nice little bird really like it it looks like it flies good but the sun was blinding maybe a second flight we will get to see oh yeah
The light was really crazy. Hard to see the bird.
Nice job guys , It does look like the space shuttle , I must have near 100 lipos now , I check all my new batteries close and charge anything lower than 40 % to make sure they are ok and will accept a charge , Most companies are still recommending several cycles before reaching full potential on them .
The only bad lipos I have had were Venom and /or Flyzone . Even all the cheap no name batteries I have over the years are still mostly good but have low C ratings compared to almost everything newer and what I like to have in my planes . I use the low C old ones for surface cars or rock crawlers now .
I think I should have done the same here but I didnt. Wasnt needed in the past. Never had such a problem with batteries before.
@@PetrincicBrosRC I have a lot of brand new ones too in stock as spares .
I haven't treated my lipos very well . LOL , But have had pretty good luck .
The E-flite batteries are one of the best IMO but they are expensive . and not a lot of size choices.
The new Spektrum smart batteries are nice quality too and for me here in Canada , they are very competitively priced compared to the 'offshore' stuff .
A bunch of my new 6 cells are ZOP power , they seem good so far and are a bit cheaper than some brands
Have bought one of these but it hasn't arrived yet. Thanks for the amazing review - you guys rock!
This is it my friends!!👊
Cant get any better 😉
great video,you guys are awesome
Thanks Elvis.
Great flight Robert! This is a very cool fpv edf.I would love to see you fly something fpv one of these days.Captain Blaz the Master in the Shower,lol! Great job recording this Blaz! A salute to my brothers!👍🏻👋🏻✌🏻
Thanks Don. Maybe I will really get my FPV experience soon. One company wants to send me FPV quad with all you need in one box. Also for beginners. Sounds interesting.
good going, from las vegas nevada,usa
Hey Fred.
I've yet to have a delta or flying wing that I added a little up trim for level flight before the first flight that I didn't have to immediately have to trim down for level after the launch. Properly balanced the hint of up trim is negligible. However, upon handlaunch the natural instinct is to pull back on the elevator. Needing to push forward is a real hassle. At the elevator to neutral, launch and if you need s click or three of up elevator for level flight it will be no big deal. Having to lean on the elevator while finding your trim for some reason is much much worse.
Hi guys, andy in UK. This is so weird as you are getting different results from myself. I have been flying mine a lot this week and it balances perfectly with the 65mm cog using a 2200 4s zippy compact, with the battery not even all the way back. How strange. I am using the cog marker they have provided on the underside of the wing. Also my hand tosses have been really easy using 70 percent throttle and using the three holes provided with a gentle toss. You must treat her like a lady though and only put one finger in each hole otherwise she sticks to your finger. Happy flying. Andy in uk.
Very weird.. could it point to a different EDF unit in yours? .. or perhaps far lighter lower C lipo's?
Might be worth comparing lipo weights, these Graphenes are one of the heaviest out there.
I think its becouse of my c rating. I have smaller 2200mAh 4S batterie also but didnt want to use them.
Well balanced fan!
This time really.
Salute from sexy ireland 🇮🇪
Big salute back from Slovenia.
lovely sound of edf
What a small fast devil!
It really is my friend.
GOOD MORNING MY FRIENDS FROM SLOVENIA 🇸🇮
Hey Mike.
You got me just for the humor. I'm about to drop my videos of these zohd .
Well its the fun that makes this hobby so great.
I was waiting to see a new ⌚️: )
Oh yeah 😉
REALLY DOSE LOOK LIKE THE SPACE SHUTTLE ✌️👍
Oh yeah.
Not a bad little flyer boys
Pretty good my friend.
Cool 😎 Nice flying
Love the bird my friend.
Very nice woeeesshhhjjj when passing by, the little EDF seems pretty well balanced.
I like it and the flare at the landing was awesome!! Sadly my eyes are too bad for these small planes and I tend to lose orientation on them. Maybe a gyro or SAFE would be beneficial as emergency helper.
It can dissapear pretty quick my friend.
NICE!
Nice hand toss off job bro’s air2 s army out
Masters of the shower 😉
The delta is really sexy. I have always loved them. I have arrows viper with 50 mm fan, fly on 1500 3S, top speed 91 mph with total regular flight time of 5.5 minutes, full throttle 3 minutes then lower power.
Would love to have that Viper someday here for test.
If you are getting 91 mph level flight out of stock arrow viper using 3s ..you must have an incredible battery...
Great content, also I love that accent!
I love you guys!
Oooooooooooooo Yeeeeeeeeeeeeee 🤘
Great flight my friend.
Taxi it Back !that Landing Noice.😄
That would be interesting to see 😁
Real nice!!
I like it Greg.
Very much like sky angel screamer 50mm edf...but this is better model quality..the edf sounds awesome...i give it a homerun...
On second viewing, seen from above this really does look like a Vulcan.. In camo paint job it would be pure sex in the sky! Perfect landing. You could even paint the closed undercarriage doors on the underside. Another huge salute from London. Yaroo, you chaps!!
Thats what I was thinking my friend. Vulcan. I love it.
Good 👍👍👍💪💪💪
Can you guys test fly the freewing VULCAN Unjust got one and am scared to fly it. So fast I like to watch you so I know what to expect
Maybe I will really get one. But now we have so many we cant even film them all.
Yeah those jets can be tricky to take off with
Catapult would be the best.
#1
Good morning my friend.
@@PetrincicBrosRC in 10 years you will NEVER run out of airplanes
@@skypilot23 Iam thinking the same thing here 😉
I actually have the perfect motor fan for this plane...i just have to retire my old beat up j power screamerit would do 100 mph easy with a 4s 1600 50c...
#2❤✈
Thanks for stopping by my friend.
Hi, do you advice a specific gyro for this model? thanks
Yes captain Blaž I seen pilot Roberts big baby on the corner of the screen. will it be the next video up pilot Robert ? Lol 😂
That was one amazing maiden all over again my friend.
I did well. Is it easy to launch if you raise it slightly when launching by hand?
Why don't they just use 4-blade prop in EDFs? Maybe they wouldn't sound as "cool" but surely you'd get better thrust and efficiency.
They did in the past. But like you said the sound is better with more blades.
Paint orange on top and green on bottom...then you will see even better.
Vulcan would be nice, but what I don't see much of is Concorde kits that fly.
Like you said my friend.
…👍
Thanks my friend.
Vidim da ni noben povedu. Turnigy graphene, te prve ki so prišle 2017, so bile znane da so jim ful pogosto posamezne celice crknile.
Nobody told you yet, these first Turnigy graphenes that came out in 2017 were known to have cells dying faaaar too often and too soon.
Hvala Domen.
Shapely and well thought-out parcel shelf EDF.
What I don't like: No signal color for better attitude recognition and ridiculously lame despite great shape.
Good thinking.
@@PetrincicBrosRC, thanks very much! By the way: I think your video about the model is the best thing I've found on UA-cam - like many of your other videos. I've been following your channel for a while with ups and downs. I have the impression that you are on the rise. Unfortunately, the euro has lost a lot of its purchasing power as a result of the pandemic. There have never been such good finished models as now. But when I see that models I bought in 2019 are now twice as expensive, it's sad. Therefore, my interest is now inevitably more in the area of accessories and tools. It is becoming more and more interesting for me to construct and build beautiful models myself, as I did in the seventies to nineties. But now with CAD and CNC support. It's worth it again.
I am currently designing a Art Chester Jeep specially adapted for an NGH GF-38cc 4-stroke petrol engine. I bought this new from HK in September 2017 for just under €264. It now costs €380-400 new from old stocks at German dealers and over €400 for imports from China calculated without customs! Outfitting and building models with more local materials saves money and is more sustainable. For example more poplar wood than balsa wood or GRP/CRP directly from local manufacturers. Many small but very good German manufacturers have had to give up in recent years. But the pandemic has shown Germany that the domestic economy needs to be strengthened.
@@arminmuller5990 Crazy times my friend like you said. The prices are really high these days. Lets hope all will be like it was soon but I do wonder if that will ever happen. I was dreaming that I could make a living from this hobby, filming planes and maybe have my own hobby store but its just not working. I did open my company again and I will try to survive and put food on my table. But I will always dream like I was dreaming that someday me and Blaž will film reviewes of the RC planes. Iam still having the time of my life now.
This is pretty much same airframe as my old screamer 50mm edf..
That's what my wife calls me, the monster in the shower.....
Pnp spec??? With gyro??
And i thought my arrows ciper was tiny