2006-2012 GL450 Expansion Tank Replacement

Поділитися
Вставка
  • Опубліковано 4 жов 2024

КОМЕНТАРІ • 6

  • @onearmy942
    @onearmy942 8 місяців тому +1

    Thank you very much for these instructions, NOTE* the grommets are easier to reinstall when fitting from underneath, squeeze and push then use a small flat head to guide the rest in from the bottom, it takes a little playing maneuvering but you'll get it.

  • @babenate3776
    @babenate3776 Рік тому +1

    Thanks alot !

  • @tedlu008
    @tedlu008 2 роки тому

    Very nice video! Maybe replace the coolant hoses as well?

    • @MunkysGarage
      @MunkysGarage  2 роки тому

      I ended up having to replace the vent hose that runs from the reservoir to the radiator due to an odd whistle type noise occasionally. There is actually a check valve in that hose and I believe it was partially blocked causing the noise. Other than that I felt the rest of the hoses and they felt okay. Not squishy or anything. They've been replaced more recently on this vehicle so I'm not too worried about it.

  • @carlosjcontreras7922
    @carlosjcontreras7922 Рік тому

    How many bottles of antifreeze do I need mercedes benz gl450 2007

    • @MunkysGarage
      @MunkysGarage  Рік тому +1

      If your doing a coolant reservoir you should be okay with a gallon of 50/50 mix. If you were trying to do a flush on the whole system you would need 3 gallons of the 50/50. In that case you would be better off buying 2 gallons of full strength and then diluting it yourself.