Joel/Sean, could you try to put the info boxes on the screen not all the way in the bottom? That way they are covered by the captions which means I have to rewind and watch without them to be able to read them. Placing them just a smidge higher will make your video’s that much more accessible!
Joel, so when are ya gonna supersize it? I know you are itching to do it. I saw it in your eyes. Lol. High five back at ya. Hope all is well with your family and the crew?
Hmmm... 1. New thing to try, yay! 2. Is it odd that my first thought on a fix for the print fails... wasn't an adhesive? My thought was to grab one of my 3D pens, set the disc parts of the failed pieces in place (mostly for the asthetics), attach them to the first piece with with the pen by filling the holes, then repeating with the second piece. Yes, I'm odd. It's one of my more charming features.
I would try printing the snaps on their side. It would make the snap a continuous strand of filament instead of stack layers. The down side you would only get a half circle without supports.
@@3DPrintingNerd the cheapest Ender 3 V1 goes for around $340. Sure it doesn't seem that expensive but it's almost 2 minimum wages. Import tax in Brazil is a pain. I'm saving up to get it and hopefully the rates will go down soon. Still I love to watch maker content such as yours, you do a brilliant job at this!
Joel thank you so much for all the videos and information, I have jumped into the rabbit hole of 3D printing with a TronXY X5SA, and am enjoying the prints I have done so far!
I find using a little PTFE lube goes a LONG way to making smooth moving 3D printed parts. I put some in a dispensing syringe and it works great and makes otherwise impossible to move parts move relatively easily.
I might've missed it in the video, but what filament is that? And do you think the little fasteners would work better in PLA vs PETG? Great video! Was a really enjoyable breakfast watch
If you still have that giant troublesome 3D printer in your garage, maybe you could make an impractically large Rolling Top Storage Desk which would once again break that giant troublesome 3D printer in your garage.
Ivan! (yes I know Joel) buy a hammer!, referring Ivan Miranda, who seems to use the butt-end of screw drivers when a mallet/hammer would work so much better!
Would stuff like this be possible in resin ? Just bought the saturn ave an ender 3 pro ,saturn hasn't arrived yet realising it has a few limits opposed to fdm for like living hinges ,but not sure about just normal non living hinge print in place normal hinges, gears and stuff ,I'm assuming not easy anyway as I haven't seen much info on the subject
Donate it to a school or library, perhaps? School would be my first choice, since it could be used as a teaching model for maintenance and upgrades (I have a 3 Pro).
The proper question is "where can I buy..." There is a web site that explains in detail and sells several 3D Gloop products. There are not cheap, but usually a small amount is needed for each use.
Joel, I can see it in your eyes. This isn't enough for you, am I right Joel? You're just the kind of guy who isn't content with small to normal sized prints. What you need to feed your soul Joel, is something larger. Be free Joel and do what the voices in your head tell you - supersize the print.
You need a good, lightweight hammer! I'm going to drop this here: ua-cam.com/video/mIb-3GN2BlU/v-deo.html Also, if I may be indulged in a bit of dreaming, seeing you and Mr. Savage collaborate on something would be incredible.
The fasteners are bad design, they should be printed in a different orientation, the designer just needs to remove the circle from the back so it can lay down on the bed
Or reduce it, since I think some sort of bump out would still be needed to hold it in place. Perhaps make it a half circle for a flat side on the build plate. I was printing several shelf and pegboard prints a while back, and that seemed to be a common technique.
Why im posting at 5am is this... Some popular influencer working to stop the comunity from having the ability to sell there owns licences. They say that is there possition when asked but tthen asked me to not name them...as if ashamed of them selves perhaps. In that case American influencer working to stop its own America comunity from being able to sell there own biznesses. This is actually happening. Ask your influencers there position on this. Its either Allow the sale of your own licence. Like up until recently it was working but went down. Or no the comunity should loose that service now trapping all owners so you cant sell your own bizness as we were doing. Ask your influencer. Kings remain holding kings positions and remove the comunity ability from buying them out or buying in and up. So kings set your terms and royalty prices for the comunity forever. Or does your influencer perfer the comunity be able to earn and buy your way in and up. Remember without websites with operating licence transfers when you upload your trapped into never selling your own bizness and there are influencers working for that outcome.....ask your influencer are they for ability to sell your own bizness or not. Or they may not care either way. No problem for long term players who already hold the kings positions. They either trapped as king forever. Else option 2 they may sell out to someone else in the comunity if they choose to. What does the comunity perfer? What does your influencers perfer.? Are the up for being named? Funny how that one i didnt name said publicly he was against resuming this bizness service but in that post adked me not to name him. Weird i thought. So i say now ask your influencer.
Is that a non commercial thing... Can i buy that box licence for bizness.....nobody can. They cant sell it either. zero infill 3d print comunity? Looks like its all gone down. Nrwbs get played into licencing there things at site with no licence sales operrating. Try sell your bizness....your trapped. Nobody can buy it newb.
To keep comunity informed. Not one fully operation website with 3d print licence sales left now in America. Sad you all folded up like a zero infill print. I can see why New Zealand split the atom first. Pitty we dont have a site to offer you. Im yet to hear back from Creality. Theres no competition for who ever now. Influencers aint been able to name not one site for comunity to use. Nothing from Mr 3d print Nerd either. No cards left to play? Cant sell your 3d print licence thing bizness now.... Buyers cant buy your bizness now. Entire 3d print comunity. Hows the influencers cred saying nothing?
@@dtylerb pifft. Is that all you got. . Wheres your operating site? Where do you licence your stuff newb? Where do check licences before selling any print newb? Even if you designed it and printed it at home dont mean you have the right to sell it. Pirates are getting nailed. I was almost banned permanatly from selling any thing ever again cause licence checks let me down....just over trying to sell one 3d print. Newbs sure are getting played into sites with no operating licence sales. You cant sell out newb. You are trapped as owner. Others trapped outside who cant buy the licence to sell what they want. If you dont know all this your newb. Not one influencer on net has yet to findone site in America left operating.....not one. Prove me wrong if you even know how. Newbs wont know how....ask your influencer. Go ahead.
@@dtylerb not knowing nor testing just gloop suggestions really tells me alot about how its all come to this. Are you watching the answers not rolling in. Let me guess... your thinking about glue? Id better not distract you with 3d printing.
@@dtylerb eh at leat the post service is operating. Id better post quick. How does your gloop comment help the comunitys value? Are you more interested in rubishing me or having services for the entire 3d print comunity operational again?
Joel/Sean, could you try to put the info boxes on the screen not all the way in the bottom? That way they are covered by the captions which means I have to rewind and watch without them to be able to read them. Placing them just a smidge higher will make your video’s that much more accessible!
Ooh GREAT info thank you!
Joel, so when are ya gonna supersize it? I know you are itching to do it. I saw it in your eyes. Lol. High five back at ya. Hope all is well with your family and the crew?
This assembly would not have been possible without the support of the Mighty Pencil of Pointing.
Hmmm...
1. New thing to try, yay!
2. Is it odd that my first thought on a fix for the print fails... wasn't an adhesive?
My thought was to grab one of my 3D pens, set the disc parts of the failed pieces in place (mostly for the asthetics), attach them to the first piece with with the pen by filling the holes, then repeating with the second piece.
Yes, I'm odd. It's one of my more charming features.
I would try printing the snaps on their side. It would make the snap a continuous strand of filament instead of stack layers. The down side you would only get a half circle without supports.
I don't know why do I watch this channel, I don't even own a 3D printer! Love the maker content though!
How much are they? What are some examples?
@@3DPrintingNerd the cheapest Ender 3 V1 goes for around $340. Sure it doesn't seem that expensive but it's almost 2 minimum wages. Import tax in Brazil is a pain. I'm saving up to get it and hopefully the rates will go down soon.
Still I love to watch maker content such as yours, you do a brilliant job at this!
Joel thank you so much for all the videos and information, I have jumped into the rabbit hole of 3D printing with a TronXY X5SA, and am enjoying the prints I have done so far!
wonderful design 🙌😎
Let's goooooo
No one's mentioning the absolute epic job Sean did editing this?!
CEILING CAMERA!!! WOOOOOOOOOO!!
Thanks, I was just trying to think of something I needed to print on my Ender 3, and wham, this shows up. I will try it today.
I lost it when the crack noise came in 😂
10/10 editing Sean.
Aftel this i can hear that Joel's mind saying "hmm lets print super huge one ", im wating for it😄😍❤🖐👍
I think I’ll make one with wood PLA. 😀 Thanks for showing off this cool print!
Yes i need a bunch of these in my life!!! time to print!
I like the filament used. What is it?
"Full send" makes me happy.
Make it GIGANTIC!!
Me: I wonder if I should print that...
My mind: heck yea
And now print a looooong conveyerbelt based on the door design on the CR-30 please! Maybe even an attachment for the printmills conveyer itself.
3D Gloop to the rescue! Love that stuff!
Pitty you cant name a working website. Love the comunitys value.
Love them much?
This is the way
Only a SMALL amount of anxiety when you see how close it is! Yay Gloop!
3d printing and CNC machining all need some persuasion, CNC it's a hammer, file or welding, and 3d printing it's sandpaper, razors and glue.
it is called a tambour top
No it’s Flappy top box
Gloop FTW.
I find using a little PTFE lube goes a LONG way to making smooth moving 3D printed parts. I put some in a dispensing syringe and it works great and makes otherwise impossible to move parts move relatively easily.
Oh how you torture your editor....good job editor man keeping up with Joel's madness 😂
Make it huge!
I would have mixed some super glue and bicarbonate of soda and used that to build up that warped surface and then sanded it to size
Joel.... you gotta super-sized that!
Would you be able to print this on the Ender 3?
I printed the roll top mini but the whole thing was fused :( Any idea what I did wrong? Edit: I did use a brim, maybe that was the issue?
love it brother keep it up
Appreciate it
SUCCESS!!! YEAH!!
this is so cool.
YOU are so cool
I might've missed it in the video, but what filament is that? And do you think the little fasteners would work better in PLA vs PETG?
Great video! Was a really enjoyable breakfast watch
if you print them in nylon soak those things after for maximum flex.
If you still have that giant troublesome 3D printer in your garage, maybe you could make an impractically large Rolling Top Storage Desk which would once again break that giant troublesome 3D printer in your garage.
A little force usually helps 😂
And if it doesn't, use a little more ...
Ivan! (yes I know Joel) buy a hammer!, referring Ivan Miranda, who seems to use the butt-end of screw drivers when a mallet/hammer would work so much better!
Me: I want a markiplier
Mom: you have a markiplier at home
Markiplier at home:
1:20 Looks like you're getting ready to roll up some sushi.
CUSTOM BREAD BOX!
how is this print in place if you had to put it together after you printed it?
The bendy part is print in place
I'm currently making mine, had to scale it down 5% cause the rolling top is too large for my ender 3 v2
same here just started the top scaled everything down to 90% though
Aww those two high fiving whales are SOOO ADORABLE
Anyone know where they from
OK, just one more distraction before I tear my MK3S apart to add the MMU2.
I'm not sure it would pass the full Joel test, would it ?
Woohoo!! Gloop hammer w/full Joel
That'll be a lot smoother if you use ptfe lube
OMG yes.
That's a nice print :)
Is there a cr10 s5 version 😜 big box
You’re using an old version of the model. He redid the pegs 3 days after the original release, per a suggestion I’d made.
Would stuff like this be possible in resin ? Just bought the saturn ave an ender 3 pro ,saturn hasn't arrived yet realising it has a few limits opposed to fdm for like living hinges ,but not sure about just normal non living hinge print in place normal hinges, gears and stuff ,I'm assuming not easy anyway as I haven't seen much info on the subject
Looks like the Krusty Krab
i might have missed it, but did you say print parameters? i couldn't find them on the prusaprinters page
Love that shirt😂
great video!
Sad for penta
Woah!
Doctor : every dream has a purpose
My dreams : 4:31
Isn't printing practical things the main goal for a 3d printer in the first place? :D
You need to make it BIGGER !!!!!!!
what is the intro song is it custom or is it a legit song
Tambour box.
My Ender 3 basically just sits around doing nothing now.
For some reason I just cant find a genuinely useful way to use it... any suggestions?
Whenever I find something cool to print like this, I go for it.
Donate it to a school or library, perhaps? School would be my first choice, since it could be used as a teaching model for maintenance and upgrades (I have a 3 Pro).
U need 2 print a flexible window screen.
Pls complete the iron man helmet and pls make it a opening working model
Ok am I dumb but where can you get 3d gloop???
The proper question is "where can I buy..." There is a web site that explains in detail and sells several 3D Gloop products. There are not cheap, but usually a small amount is needed for each use.
@@michaels3003 ahh cool thanks
👍
Nice video, good to see you are human too
Because Knolling is half the battle! And "convincing" is the rest..
make a 300X come on now. i miss the mega builds
3D Gloop there is not a UK supplier doh!!
Joel, I can see it in your eyes. This isn't enough for you, am I right Joel? You're just the kind of guy who isn't content with small to normal sized prints. What you need to feed your soul Joel, is something larger. Be free Joel and do what the voices in your head tell you - supersize the print.
only a week late for mothers day stuff.
How I feel :)
It’s always nice when “convincing” does not include a sledge hammer.
Do it in resin!!!
Need to add some feet to the storage box!
You need a good, lightweight hammer! I'm going to drop this here:
ua-cam.com/video/mIb-3GN2BlU/v-deo.html
Also, if I may be indulged in a bit of dreaming, seeing you and Mr. Savage collaborate on something would be incredible.
Hi from sweden :) my ender 3 pro brock today :(
Don't worry! There's a lot of tutorials online to fix Enders. What specifically broke?
@@WatermelonNinja299 tha cabel that gose to my z motor. Have order new one but have to w8 until tomorrow to get it :p
@@penta3d925 Sounds good, all you'll need to do is take the bottom off and replace the cable.
👍🖖
it reminds me of the krusty krab
Its a mini bread/bagel bin 😂
where is link
Hopefully trying to find Zelda.
@@3DPrintingNerd Lol! For some reason links were not showing in description for me. :)
How about now? Are they there?
Torture toaster to go with the bread box?
Bruh
But your the 3D printing nerd you make things huge where is the huge version?
hi reddit
The fasteners are bad design, they should be printed in a different orientation, the designer just needs to remove the circle from the back so it can lay down on the bed
Or reduce it, since I think some sort of bump out would still be needed to hold it in place. Perhaps make it a half circle for a flat side on the build plate. I was printing several shelf and pegboard prints a while back, and that seemed to be a common technique.
Why im posting at 5am is this...
Some popular influencer working to stop the comunity from having the ability to sell there owns licences. They say that is there possition when asked but tthen asked me to not name them...as if ashamed of them selves perhaps. In that case American influencer working to stop its own America comunity from being able to sell there own biznesses. This is actually happening. Ask your influencers there position on this. Its either
Allow the sale of your own licence. Like up until recently it was working but went down.
Or no the comunity should loose that service now trapping all owners so you cant sell your own bizness as we were doing.
Ask your influencer.
Kings remain holding kings positions and remove the comunity ability from buying them out or buying in and up.
So kings set your terms and royalty prices for the comunity forever.
Or does your influencer perfer the comunity be able to earn and buy your way in and up.
Remember without websites with operating licence transfers when you upload your trapped into never selling your own bizness and there are influencers working for that outcome.....ask your influencer are they for ability to sell your own bizness or not.
Or they may not care either way.
No problem for long term players who already hold the kings positions. They either trapped as king forever. Else option 2 they may sell out to someone else in the comunity if they choose to.
What does the comunity perfer?
What does your influencers perfer.?
Are the up for being named?
Funny how that one i didnt name said publicly he was against resuming this bizness service but in that post adked me not to name him. Weird i thought.
So i say now ask your influencer.
Is that a non commercial thing...
Can i buy that box licence for bizness.....nobody can.
They cant sell it either.
zero infill 3d print comunity?
Looks like its all gone down.
Nrwbs get played into licencing there things at site with no licence sales operrating.
Try sell your bizness....your trapped.
Nobody can buy it newb.
To keep comunity informed.
Not one fully operation website with 3d print licence sales left now in America. Sad you all folded up like a zero infill print.
I can see why New Zealand split the atom first. Pitty we dont have a site to offer you.
Im yet to hear back from Creality.
Theres no competition for who ever now.
Influencers aint been able to name not one site for comunity to use.
Nothing from Mr 3d print Nerd either.
No cards left to play?
Cant sell your 3d print licence thing bizness now....
Buyers cant buy your bizness now.
Entire 3d print comunity.
Hows the influencers cred saying nothing?
@@dtylerb pifft.
Is that all you got. . Wheres your operating site?
Where do you licence your stuff newb?
Where do check licences before selling any print newb?
Even if you designed it and printed it at home dont mean you have the right to sell it. Pirates are getting nailed. I was almost banned permanatly from selling any thing ever again cause licence checks let me down....just over trying to sell one 3d print.
Newbs sure are getting played into sites with no operating licence sales.
You cant sell out newb. You are trapped as owner. Others trapped outside who cant buy the licence to sell what they want.
If you dont know all this your newb.
Not one influencer on net has yet to findone site in America left operating.....not one.
Prove me wrong if you even know how. Newbs wont know how....ask your influencer. Go ahead.
@@dtylerb hows that fixation on gloop sniffing panning out for you.
@@dtylerb not knowing nor testing just gloop suggestions really tells me alot about how its all come to this.
Are you watching the answers not rolling in.
Let me guess... your thinking about glue? Id better not distract you with 3d printing.
@@dtylerb eh at leat the post service is operating. Id better post quick.
How does your gloop comment help the comunitys value?
Are you more interested in rubishing me or having services for the entire 3d print comunity operational again?