ND MX-5 Miata Rearview Camera Installation
Вставка
- Опубліковано 6 вер 2024
- Brandon shows us the step by step installation of our ND1 rearview camera into a 2016 Mazda MX-5 Miata.
www.flyinmiata...
Give your ND an integrated rear view camera! These are especially useful on RFs, but we like them on all our cars. This is a full factory-style integration without the weird little bumper pimple that the 2019 cars got. Shift into reverse, and the screen on your dash changes to the camera view including side traffic alerts. Head forward and you're back to normal.
The distance indicators on the screen are more useful than some of the other aftermarket cameras out there. They range from 8" to 28" from the bumper, making it easy to back in perfectly.
Not compatible with Sport models that do not have a screen for obvious reasons. Easy installation, it's plug and play other than one new hole you need to drill above the license plate. The kit even includes the right size hole saw.
Flyin' Miata is the world leader in Miata performance. We offer a wide range of parts for all years of the Mazda MX-5 Miata.
www.flyinmiata.com
970-464-5600
Installed this in my RF today. Overall this video was super helpful and accurate. A couple of additions:
1. The RF is more difficult than the soft top to push the plug from the front through the trunk. Don’t even bother trying to feed it without taping it to a coat hanger.
2. Don’t stick the tape on the hole until after you push the plug through the impact foam (of course, make sure it’s looped through the tape first!) I put the tape on first, and the peel came off while I was trying to push the plug through, which ended up messing up the stickiness. I’ll be buying some Scotch Extreme and cutting a replacement.
Thanks for the input!
Thank you. Can you confirm that camera comes on automatically when you shift in reverse?
Absolutely the best instructional video I have seen. I was totally intimidated by the prospect of taking out interior panels, but Brandon explained how all the fasteners worked and what to slide where when putting it back together. He made the job quite doable for a guy who has never removed a piece of trim in his life.
Thanks Robert!
At 20:30 Brandon grabs a longer drill. I used a 3/4 inch paddle bit. It is the perfect size. It just fits through the hole you have drilled in the bumper cover. And since a paddle bit scrapes the foam rather than trying to twist through it makes a clean hole with the bits falling out on the floor.
MX-5 2016 ND, After watching this video, unless I had someone like you doing the install I would be hesitant to mess with my car. Great video, would be nice to have a rear camera as I have them in all my other cars.
Love how the car was designed to be so easily taken apart, also a wonderful detailed explination of the install.
THANK YOU, THANK YOU, THANK YOU, My wife just obtained a 2017 Miata Hard Top RF Grand Tourning, RED. in color, and I watched your video twice then watched it step by step and completed the installation. I got lucky by fishing a Coat Hanger from the Trunk to the right side of the Passenger compartment, taped the wire to it then pulled it through. I got caught up a little fishing the wire from the camera up through the bumper and I think the toughest part was removing the tape from the harness in the trunk so I could fish the camera lead through the rubber seal. It worked first try, cleaned up the wires with Zip Ties and it looks perfect. Thanks again this was a HUGE help and it turned out a great success.
Happy we could help! :)
Brilliant video. Step by step which even I could follow!! Not only am I an OAP I've also had a stroke and find things difficult. It took me most of the day but completed the task, eventually. Clear, precise instructions, would highly recommend this video.
Thanks for the kind words. We're happy to help!
Better looking than the 2019 oem one, for sure.
Thank you thank you for the great camera angles and detailed descriptions of where to pull and where the clips are! Seriously could not have done this without your video- also SO GRATEFUL you showed us how to put it all back instead of just saying - “put it back in reverse order of how you took it off”.
Thank you! We're happy the video helped!
Thanks Brandon and FM team for this great instructional video!
Thanks for watching!
Nice to see someone just taking apart _one_ side - the other videos show the driver (left) side being pulled apart (the sill and the weather strip, etc.) I'm sure I'll go full on OCD with the wire ties and felt tape but looks pretty close to factory (actually better since the 2019's is right in the center of the bumper cover and doesn't look as good as this).
Many thanks to Brandon, this video made the installation straightforward, great camera work and clear explanation. Job completed in just over 2 hours, I don't think I could have done it without watching Brandon a couple of times
awesome video showing us how to take the car apart.
Thank you VERY much for this clear and very accurate step by step video. With this video at my side I installed my backup camera today. Would not have been willing to try it without your help.
Thank you so much for this very detailed video, i just installed this rearview camera on my 2017 RF and you made it very easy ! For RF owners, if you struggle to pass the cable to the trunk, i used an electrical copper wire (22 awg or something like that). Electrical wire only, i started from the trunk to the front (easier to find a path this way for me). When the wire passed all the way through, i taped the cable to the wire, front side. Then, back to trunk side, i pulled the wire gently with the cable attached to it. There is not much space, but it passes without trouble.
Thanks for the tip, Tom!
Thank you! Great tutorial!
Glad we could help!
Great DIY vid. I'm considering buying a Mazada MX-5 Miata Grand Touring RF. And a back up cam is not just cool, it's a safety issue for the vehicle, yourself, and others. Thanks for sharing. :)
Happily used your video to install a reverse cam today. Thankyou from Australia!
Awesome! Thanks for your support. :)
I just installed my backup camera and everything worked out fine! The video was extremely helpful. First, I watched the whole video, then when I got brave enough, I went step-by-step, pausing the video as it was time to do the next thing. The ONLY thing I would mention is if you have an RF like me, things will be a little easier with the top down, and you need the battery for that, so lower the top before starting.
Excellent video. Step-by-step. Thank you for posting this. The FM Camera worked perfectly. I was holding my breath the first time I shifted into reverse- but to my relief the camera had video!
Absolutely fantastic instructional video. Followed it step by step and it made the installation a lot easier - thank you.
We're glad to hear that! Thanks for watching. :)
Just added the rearview camera and these step by step video instructions were great help. I had to use a coat hanger to get the cable fed to the trunk. Super glad to have this upgrade on my '17 RF
So glad we could help!
Great video. Every step was explained in detail. The installation took me 3 hours. I was very careful.
By far the best “How to” video I’ve seen. Initially I had a little trouble getting the camera cable started. I took the short end of a hex wrench (Allen wrench) and pushed up on the foam inside the light slot. The cable then slid through easily. Thanks for a great video.
Thanks for a very detailed and CLEAR video
OMG, it works! I did it, and the step-by-step directions were perfect! I also called once for some advice, and they answered!! Thank you!
An additional comment.
I found the SEATBELT TRIM piece easier to get in position if I removed the trim piece on the front of the stock roll bar. It just pops off (the rear black plastic piece is bolted on) and now the Seatbelt piece can be seated and the roll bar trim now just pops back on
Just installed and went well! Great video explanation. Also a great opportunity to do some panel detailing while everything was apart. For the RF, wire running kits highly recommended (the same kind of tools you can get to run television and ethernet cables behind your house walls). That part went surprisingly quickly. Thanks for a great video!
Thanks for the tip and glad we could help!
Brandon, you are a fantastic instructor and explainer.
Great video, took me 2 hours taking my time not to mark or damaged anything 👍
who else is amazed that Mazda didnt just prewire for this? They could have sold a ton of backup cameras at the dealer level where the dealers would have been happy to install because they didnt have to take half the damn car apart! It just blows my mind!
Can’t thank you guys enough for this video. I decided to give this a go and took my time and hey presto the camera is installed and worked perfectly. The only thing I noticed was that I needed the engine to be running for it to fire up rather than double engine start button push. Thank you!
Brilliant "how to" video, thank you so much for taking the time to shoot and post. Followed this step by step and installed my rear camera into my 2015 MX5 GT ND (in OZ the ND model starts in 2015). Like others have said.. SOOO GRATEFUL!
Might as well put in Apple CarPlay at the same time!
I'm thinking the same thing - one less time to take things apart...
Not a bad idea, would save you the headache of tearing everything apart again! When I did the Apple CarPlay install, there was a fair amount of wiring that needed to be stuffed back there. If anyone's done both mods, I'd be curious to know if it was a problem having both the CarPlay wiring and this jumper for the backup camera all jammed in there...
@@Steve10Lot there is space for everything. Dealer installed carplay module and I installed the camera myself. Snug but it all fits.
Thanks for the video and a great product. Installation was simple. The only problem was me.
Managed to drop the 10mm from the Screen bracket, figured it would roll out but couldn't find it.
Stole a 10mm bolt from the door bushing.
Then found the lost bolt had teletransported to the floor. Trip to Mazda saved
Then I realized I forgot the rebolt the front kick plate.
FINALLY, I thought I had screwed up the drilling when the camera cable came out by the muffler. This actually made it easier to feed back up into the trunk.
Excellent comprehensive install video. As I am in the UK should I therefore run the cables on the left hand side?
I picked up this kit from you guys on Black Friday deal. Can’t wait! Thanks for the video.
Excellent explanation- top job!
Many thanks!
Hi Brandon, many thanks for the showing me how to do the backup camera install, your installation is excellent and very descriptive. I was able to follow with ease. I just bought a 2017 MX5 RF, I was sad to see it missing this feature. I was cheering you buddy when I check/tested the camera ( It’s working well) as you showed to do on your fabulous video... Wish you all the best! - Tony from Canada.. Cheers😂🍻
Great instructions.Reckon it saved me a shed load of time,Thank You
We're glad we could help, and thanks for the kind words!
Great video, able to use it to install my camera on my UK 2018 RF, even as an absolute first-timer. Thanks so much for making this so easy to follow!
I have a question @12:22 you can see 2 loops one green one white. What are they for? I couldn't find an answer in the instructions.
I just added the camera. Your video was awesome. However, I don't seem to have android auto anymore and my navigation isn't working. I don't think my usb ports are working correctly anymore and that's where the map sd card goes.
Did you have an aftermarket android auto set up? US Cars that included Android Auto/Apple Car Play should have a camera installed from the factory. We aren't aware of any compatibility issues, but if you are still having issues, we recommend reaching out to our customer support team directly to see if they can help you with your issue.
Please update us on this
Hi Brandin, your video was a great help to install the rear camera in my RF. Very, very clear video! Kind regards, Boudewijn from the Netherlands.
Thank you! Glad we could help!
Best DIY video ever! Thank you so much.
Works great and this video is really helpful!
You are nutz I'll pay the $150 to have it installed.
i think the best thing i got out this video is finding out i have a storage compartment in my passenger seat
What a great video!! Installed on my RF today. Thanks!
Great video, installed mine following this instruction in under 2 hrs. You can use your stock long antenna to guide the wires! I find it super helpful because it is very long and very flexible to work within those tight spaces. Also, the video had the roll bar installed behind the seats. It seems like the stock setup prevents the plastic piece at 9:27 to be detached? I just loosened it enough to allow the piece after that to be taken off.
Cool can't wait to do the install on the RF.. aka Ratoncito.. (little mouse )
When I installed this, the camera kinda falls off from the 3m tape. Is there a way i can fix this?
Same goes for me. I‘ve pushed the camera with a little bit more force into the bumper and I‘ve heard a little clicking noise and now i‘m hoping that those metal clips on the camera have snapped into place. But I already went ahead and ordered some 3M pads in case the camera is getting loose again.
Wait hold up, was that a customer background?
Very good video, clear and concise, always pointing out the difficult parts. Could do without the background music though.
Great video, would you route the wires on the same side on right hand drive vehicle, many thanks from the UK 👍
Hmm, good question and since we've never tested it, I don't really know. Sorry. You might reach out to IL Motorsports to get their opinion on it.
DOH, ye fair point thanks anyways 👍
Just set my Flyin Miata camera using this video
What do the green and white wires do?
Great video. Clear, concise, and excellent description on pulling off each piece of the dash. Any changes with the 2017 rf model?
The 2017 RF is exactly the same.
@@FlyinMiataVideo Thank you sir.
is Mazda not using any screws 😂😅? I am quite surprised that you just needed the 10 nut at the passenger side cockpit
Push button fasteners are the way to go anymore I guess.
Fantastic tutorial brother. Thanks for posting msn.
You have a new subscriber!
Just went on your website and it says this item is out of stock. When will you get more? Thx.
We plan on getting more in stock soon! For ETAs and product inquiries, please reach out to our customer support team directly. They'll be more than happy to give you any info and ETA we have. Thanks!
Super mémo super utile installation super simple avec vous
7:35 - dash lights on. Do as I say not as I do on disconnecting battery
great video. How much do I have to expect to pay for the installation ?
We recommend reaching out to a trusted shop near you or asking your Miata club for advice. We don't do shop installs and cannot give installation estimates. Sorry!
Question: How does this affect models with rear parking sensors? Will they still work/beep? Thanks for the great video!
It shouldn't affect the parking systems in any way.
Hello I just installed your kit in my 2017 MX5 ND RF and I was able to do all the installation process no problem except that the camera just doesnt show up when I put the car in reverse. I disconnected the battery for 5 mins, nothing. Checked all my wired and clips andade sure there were no loose cables and still nothing. My infotainment unit is up to date (70.00.352 NA N) and still nothing. Im a bit concerned
Please contact our customer support team, we'll help you troubleshoot this.
Good vid’ Brandon (I’m not quite yet done watching) but what shift knob is on Andy? I like its industrial look.
That's the Cravenspeed shift knob included in our Cravenspeed ND Short-shifter kit.
www.flyinmiata.com/default/cravenspeed-short-throw-shifter-for-nd.html
(Shift knob with FM branding is also available separately. www.flyinmiata.com/default/cravenspeed-fm-shift-knob.html )
Great vid, Its an easy job, just pull this and this and this and this and lossen this bolt and pull this out and this and this and this and this....
Good video. I'm on the fence about doing this because if I ever wanted to pull the bumper (I may want to install a hitch in the future), it looks like it would require undoing the wiring. Is it possible to have the connection go on the other side of the rubber grommet so that you have more of a quick disconnect?
that's an argument for not sealing it up with the rest of the wires in the rubber plug in the trunk wall and the inside of the bumper. I just ended up cutting a slit in the plug and feeding the wire through there. Actually unraveling the old tape without damaging anything is pretty tough, risky, and time consuming
will this work on gt miata, if I don’t have apple carplay?
This camera should work on all the trim packages that also offer the infotainment screen.
Wow, what a pain. Didn’t that car come with a camera and harness installed? And if so, why not figure out how to interface the new camera with the old wiring?
They started coming with cameras in 2019. This is for the 2016-18 models that didn't have that option available. And it is amazingly well integrated for an add-on, but in installation and in use. It uses as much "old wiring" as possible but some of those wires just aren't there.
My stand installed it and say there is no reference lines 😮😮😮 does anyone know if there needs to be something activated on software?
If you are having issues, please reach out to our customer support team directly via phone or email. They'll be more than happy to help!
@@FlyinMiataVideo I am going to pick up the car in the dealership Wednesday and confirm if they managed to fix the issue or not. If they didn't I will send a email seeking help. Just posted a message here in case anyone else had the same issue and managed to solved it.
Do I need a software update for the camera to work. I just installed mine and it's not working. I did disconnect the batter and restarted the head unit
We are not aware of any necessary software updates or issues. If you are having problems with your camera, please contact us directly so that we can help trouble shoot the issue. Call 970-464-5600 M-F 8-5 Mountain Time or email support@flyinmiata.com and one of our CSR team will be happy to help!
Do you know where I can find a camera that does loop recording (to replace the stock camera that just does rear view)
How did y'all get the infotainment to boot up with the photo of Andy on it?
There are a few different ways to change the wallpaper on the screen. On the earliest cars like Andy, you can SSH right into the infotainment system and upload files from the command line. It's more common do it with a thumb drive, the car will execute commands on the drive and can load in new images as well as other system tweaks such as "pause on mute". Check the Mazda3Revolution. com forum for some good information.
Did anyone have trouble with the head unit recognizing the camera? Installation went well and battery was disconnected, but screen is not showing rear view.
David is talking to our customer service team, we'll get things sorted out.
For those wondering, make sure your infotainment version is up to date.
Great Video, very thorough and detailed instructions.
Any major differences for installation in an RF? Cheers.
No differences at all.
@@FlyinMiataVideo Cheers. Thanks for the feedback. I'm now tempted to convince my partner to let me do it to her car. 😂
@@ipkimbo You're on your own there!
Fishing the camera wire to the trunk/boot is a LOT more of a challenge I was able to get mine back there by using one of those "grabbers" with the little claw at the end (I didn't use the claw part for the wire just taped mine to the end - I started with a wire fish-tape - don't use that! I had caught the end in a wire bundle and spend about 2 hours getting it freed up. Other than that it's pretty much the same as the convertible.
thanks,what kind of connection does the camera have,
It's a proprietary plug on the end of a jumper harness that bridges into the factory unit. Brandon goes over all the details in the video.
Replace your cabin air filter while doing this. Trust me.
Great suggestion!
where can I get the CarPlay kit and software?
Your friendly Mazda dealer should be able to help you out there.
eBay is likely to be the cheapest option. Should be around $150. For the software, check out the master thread on Miata.net for a good guide.
Is this kit still available?
It certainly is! Head over to the Flyin' Miata website.
Where can I have someone do that for me in Houston?
We don't have any recommended installers in Houston. You might try reaching out to your local Miata club to see who they recommend.
@@FlyinMiataVideo Thanks
I honestly would've rather done this than have the butthole on the bumper. So far it's the only thing I really don't like about my ND2.
Any thoughts or experiences in combining this with the available Apple / Android Auto kit (0000-8F-Z34) install? Thanks
We haven't installed the Apple kit, so we don't have any direct experience to share. We know they're compatible and it's very likely that it would be easiest to install both at the same time.
Flyin' Miata thanks- just got the Apple / Android kit and will (attempt) to install along with the rear view camera I purchased from yourselves. Will post update to confirm. Thanks for your great videos, keep up the good work!
Update: Apple/Android kit installed in combination with the rear camera - all working fine. As already mentioned if your thinking about these mods, get them done at the same time. Thanks!
@@andrewniblock4464 Thanks for the update! Hope your install went well!
@@andrewniblock4464 I just did them at the same time too - only requires taking off a couple extra pieces of trim by the little usb box you have to replace.
Another perk is that the OEM stereo upgrade kit comes with more foam tape than you need, so you can use it when bundling up the camera wires in the trunk.
Took 3 hours to get everything set up just to realize that all the work was worthless because nothing happens when putting the car into reverse…
Sounds like something went wrong. Please reach out to our customer support team directly and they will be happy to help you trouble shoot the issue.
@@FlyinMiataVideo Yes actually the wiring harness was faulty. After getting a replacement one, everything just works fine! Thanks for the reply and also for the video 👍🏻
You've got an engineering degree, right? Based on your terminology, I guessing you do. :)
Good guess! Brandon is our resident engineer and head of our Research and Product Development department :)
@@FlyinMiataVideo I'm a formally trained CADD operator (Computer Aided Drafting and Design), I've work with several engineers.