How to build a wooden planter | STIHL
Вставка
- Опубліковано 6 бер 2024
- Build a hanging or standing wooden planter.
With this versatile DIY flowerbox you get to decide if you want it off the ground and mounted to a wall or balcony or standing on the ground. Either way, your plants will look fantastic in it.
Check our website to find further information or STIHL tools like the GTA 26 wood cutter:
www.stihl.com/STIHL-power-too...
Here's everything you'll need for this project:
- Workbench
- Measuring tape
- Set square or carpenter's square
- Pencil
- 2 one-hand clamps
- Multi-sander with 150 grit sandpaper
- Cordless screwdriver with bit inserts
- Cordless drill with 4 and 6 bit wood drill bits
- Wood stain and brush
- Hand tacker
- Scissors
- 10 mm open-end spanner
- 15 wooden slats for the bottom and the front and back: 50 cm x 10 mm x 46 mm (starting - length: 240 cm)
- 10 wooden slats for the two sides: 27 cm x 10 mm x 46 mm (starting length: 240 cm)
- 2 squared timbers on the inside of the sides at the bottom 27 cm x 23 mm x 23 mm
- 4 squared timbers vertically at the 4 corners (2 per corner) 26.5 cm x 19 mm x 40 mm
- 2 squared timbers vertically at the 4 corners (2 per corner) 24.5 cm x 19 mm x 40 mm
- 10 wood screws / Spax for the squared timbers on the inside of the sides at the bottom 3.5 x 30
- 8 wood screws / Spax for the screw connection of the two vertical squared timbers 4 x 50 mm
- 40 wood screws / Spax for the wooden slats at the front, back and both sides 3.5 x 25 mm
- Pond foil 0.5 mm or other waterproof foil
Var A) If string suspension:
- 4 screw hooks 4 x 50 mm
- coarse fixed cord in the desired length (depending on the suspension height)
Var B) If mobile:
- 4 castors (furniture castors) with plate 40 x 40 mm
- 16 wood screws / Spax for fastening the castors
- 2 squared timbers at the bottom of the floor on both sides 27 cm x 23 mm x 23 mm
- 4 squared timbers vertical in each corner of the box 27 cm x 23 mm x 40 mm
- 4 squared timbers also vertical (opposite side) in each corner of the box 25 cm x 23 mm x 40 mm
- 4 wood screws / Spax for fastening the squared timbers to the floor 3.5 x 30 mm
Var C) If parapet suspension:
- 4 metal angles / chair angles
- 4 hexagonal screws for fixing the angles to the flower box M6 x 50 mm
- 4 hexagonal screws to connect the 2 angles with one to another M6 x 20 mm
- 16 washers M6 x 12 mm
- 8 hexagon nuts M6 or wing nuts
Var D) with side handles:
- 4 furniture handles with matching screws
- potting soil ca. 20 l
- hand shovel for planting
Thanks for watching. Did you enjoy this video? If so, feel free to give this video a like and subscribe to our channel.
---
Facebook: / stihl
X: X.com/stihl
Instagram: / stihl
Website: www.stihl.com
#howto
#DIY
#tutorial
#STIHLGTA26
#woodenplanter
#STIHL - Наука та технологія
👍