I totoally agree! I put a 72/68 turbo in a non-HD 2500 5.3 with lq9 cam & ls3 2yrs ago, it's an absolute blast like your blue truck is described. Slam the gas and the wastegates are opening when it finishes downshifting. BTW one thing that helps response is a 2-2.25" crossover. Most people do a 2.5-3", but that's way too much for under 1000hp. All it does is create lag with zero HP gains.
Same thing richard holdener preaches. Keep the stock cam, converter,heads and put a smaller turbo on it. Everything on trucks is setup for the best low down torque from the factory already
As someone else who has a boosted towing Silverado, I agree with everything you've said. Stock (small) cam/converter is the way to go when using them like a truck.
I have a 2018 Chevy Silverado HD with 6.0l. Like to keep it stick but don’t know what turbo to get so I can continue to use it as a daily work truck for towing. Per your experience, what do you suggest?
@@isactoriguevara6030 I wouldn't go too much smaller than a 78/75 with a .96ar turbine housing. Keep the turbine in the 72mm+ region with a decent size ar housing and you would be perfect 🤙
Can't find a single video on youtube of someone talking about the repercussions of modding an Ls engine. I drive a Denali 6.0l and wanted to throw a procharger or cam or both on it and heard about the torque converter being an issue or the 4l65e not handling more than 380ft/lbs torque. Hearing your story is more insight than 90% of the websites I've been researching lately. Thank you
I’ve always wondered why there hasn’t been any talk on stuff like this coming from the factory for a diesel alternative/ option or add on for gas trucks.
Hey I’m so surprised I found this video but I just traded my truck for that quadasteer yesterday that’s crazy I just thought it was cool awesome video brother
Lots of good stuff in this video! I just bought an ‘05 2500HD 6.0 for light plowing and winter driving. My 2WD ZF6 Duramax does all the summertime work. Would you say either setup would be any better than the other for my plowing and occasional towing activities? I have a Duramax roller with rad and intercooler (and piping too but I doubt I could use much of that). I have a set of new Camaro cast manifolds I have thought might be helpful, as I need to fix my leaky stock ones anyway.
I would go with the latest 7875 w/ the 1.25ar exhaust housing and run a 4" exhaust. The duramax intercooler pipes won't fit, as I have tried. You'll need a t4 turbo log on the passenger side and a stock truck manifold works fine on the driver's side.
Ive teated several setups.. Best combo i found with a LQ4 was a 206/214 .553/.553 115 and a S475/96. My next setup will be a S468/96 with next size up A/R. Also some Water/Meth always help keep everything nice and clean inside.
Keep these vid going. I have yet to find much info on a turbo setup for a 6.0. I have a 2018 2500hd 6.0 with a stock VVT cam. What’s your thoughts on a cam for it and a turbo was thinking of staying stock on the converter not looking for a race truck lol. Just want it to tow my 8k lb rv better. Thx and good luck with the channel.
I did a gen v 6.2 with a cam and headers, and it made 409 whp and 433 tq. I would try the stock cam, or do dod/vvt delete and do a low 200's duration cam. The latest billet 7875 with a 1.25 ar.
Excellent video. Thank you for explaining this. I haven't been considering a turbo, but the t4 could be a great add to my build. It's so true that you want power down low. How often are you revving around 6000, even when not towing in one of these lol?
guy nearby me takes the stock convertor and cuts them then adds a smaller Dia turbine side and keeps the clutch side stock. Basically allows him to take the stock convertor from 2500rpm stall to 2800 - 3000 and still have a larger clutch. perhaps somebody makes a convertor like that with a triple disk
Lol, the good ol GM Average mpg readout is always way off. My 2500HD says I get 7.7mpg but I know damn well it get more than that and I have 37 inch tires on mine.
Do you have any driving videos of the Quadrasteer? I picked up a GMC 1500hd QS truck last week myself. I forgot how pathetic these 6.0 4l80e trucks are stock! I would like to do something similar to what you've done there. Nice and simple.
I have a few build videos of the 1500hd. It has a 450lph in-tank with a hydramat, 100# Holley inj, pqy return style regulator. Once I get the red 2500hd back together...I'll try to get some towing videos. I just got the Yank triple disc back today...and they loosened the converter up to 2500 rpm and now I'm waiting to get the transmission back.
I would love to know what fuel pump you are using on this thing been looking and not really getting any answers because nobody usually builds 2500s also is your system a returnless or a return system?
Did you do anything to the transmission? I have one I’m planning on boosting. After watching your video I’ll probably stick closer to a stick style driveability
Great info sir, you also work on your pastors' vehicles, I see, lol So at the end you say you would rather have a bigger exhaust housing but would going from a .96 ar to a 1.25 not hurt the spool time drastically? I guess if your goal is big HP then thats what you would want.
Yeah, he has a 97 Chevrolet Z71 that keeps me busy. I say the larger ar on the 7875 because with the 6.0L, it makes a ton of back pressure and a 1.25 would help alleviate that. The .96 is a 3" dp, and the 1.25 is a 4". I don't think it would affect the spool time between those housings. I have run a cast 7875 1.25 on a L77 in a Caprice ppv, and it was pretty instant.
@MPKPerformance Awesome, with every video you post I'm getting closer and closer to just pulling the trigger and doing my truck lol. Thinking about just throwing a 5.3 in it with a properly sized turbo since my 6.0 is TIRED and I've got 2 good low mile 5.3s sitting here. I figure if I can get boost low enough it should t be much differance in TQ than with a 6.0 but I dunno.
Would you be able to run normal pump gas other than E85 with this combo, maybe with a different tune? E85 is kind of rare around me and I want to turbo my 6.0 and make over 400hp. Nothing crazy just more than stock. My trucks mostly a daily driver but I do tow with it.
I just bought a 2018 Silverado 2500 HD with the 6.0L. I want to use it as a daily work truck that can continue to haul and have low end power. Per your experience, what turbo set up (including other components if needed) would you recommend?
Just picked up a 06 2500 , how well do these set ups tow out west in the mountains? Who psi is the black truck on? Also what fuel? I want that exact set up
So i recently purchased an 02' 2500 HD 6.0 gas burner. Its a normal just cruise around toy truck but i also want a little more power too it. What affordable turbo without having to change the cam would you recommend me getting? Thanks, and im a new follower :)
I put a Comp 216/220 cam in my 1500hd when I lost a lifter looking for a little more power. I like it but want a little more for towing. Would that smaller turbo be a good choice given my cam or should I think of going back to the smaller stock cam?
I got a 1500HD quadrasteer with 273 rear. What would u recommend to get make it faster? What would you recommend for a exhaust setup if i wanna turbo it, because I waned to do headers and exhaust first and work on the engine when I have more money? I don't wanna screw myself. Don't know much about this stuff yet Thanks
My 02 1/2 ton on 20s n 33s stock 3:73s extended cab with a cammed 6.0 swap is going through similar issues the power is not down low at all 2600 stall it feel like a turd as a daily needs a lot of throttle to get movin I haven’t tried to tow with it yet. And I have a Texas speed stage 2 225/236 629/615 114LSA 660 springs on 317 heads
We just swapped a 4.8 from a stage 2 turbo cam to a summit tq cam and it made all the difference in the world. It has 200/205 with .550 on a 113. The crew cabs don't need the duration a lighter vehicle does.
My daily/tow rig is a 1500hd and will be buy stuff for a turbo kit soon. Looking at a VS 7875 t51 turbo and Trick manifold setup. What fuel system parts would you use for a pump gas setup around 500 who?
So if this was a half ton set up. Yukon/sierra ect.. What turbo would you go with. Same set up as this hd1500. Just add a turbo. Some daily driving some towing.
Hey man I got a 6L 799 heads flat top pistons 218/227 112+2 cam getting an S475/83 1.10 you think that turbo would be the right combo or should I be using a bigger turbine wheel?
@@MPKPerformance quick Spool, 8-10psi of boost aiming for around 600-650wheel hp and torque it's a 2500HD as well so it's heavy, just want it to be fast. turbo I bought is also a billet wheel 7+7 Most I'd be looking to get out of the setup is 700hp maybe a little more than that for torque 14psi max, but the numbers above are probably more realistic
@@MPKPerformance Awesome man, that really encouraging had people telling me there was no way it would do 700whp but I know that it's possible if it's pushed hard enough. might be all it's got though lol. But it will be good for Spool up
Do you think a T6 would work better (towing) with a 408? Im worried about the T4 choking the exhaust when pulling for long periods of time through the hills
I still think a t4 would be the way to go. I'd get the largest ar available and run a 4" exhaust. You want it sized where it spools in the lower rpm so you can use the power. Also, a short duration cam helps with tq production.
@derekr1854 I've reached out to huron speed, they are recommending T6, I also have ported 823 heads going on this 408, I'll probably run the s480 they are recommending. I'd rather it spool a little slower and not have back pressure egt problems, than light instantly but melt the pistons out of it while pulling up a long grade
@derekr1854 it's going in my 03 2500HD, ported 823 heads, 408 stroker bottom end, fast 102mm LSXRT intake, whatever boost it will safely run on pump gas with water meth injection. 5.38 gears on 35 in tires, shooting for 700hp, wouldn't mind more though. Based on some other trucks I've seen on UA-cam I think that's pretty reasonable.
What fuel do you run only thing available in my area is 87 octane and diesel no premium unless I drive 45min to nearest city and all they have is 91octane and it's ify if they even have that at times😬
Do you think that 7875 will work well on a 5.3? I have a 2007 NNBS Silverado with the LY5 and I have that turbo (On3 7975 .96 AR and 3 inch V band). I was going to purchase a 70mm turbo for the 5.3 but if I don't have to, I won't. Do you think the turbo I have will work well for towing?
@@MPKPerformance thank you. I could never get a straight answer for this question. Like I said, I was about to order a 70mm turbo for it but if I don't have to, I won't. I also have an LY6 for the truck just in case the 5.3 gives up the holy ghost. Not looking to make all the HP. Just all the TQ. Truck is mainly a cruiser, hauler and tow vehicle. Thanks again!
What's a good way to contact you? I'd love this done to my truck I tow and would love to know everything I can. I have 2 6.0s just like you ones 373 ones 410 but I'd love to get both done
I would love to see heavy towing vids
I totoally agree! I put a 72/68 turbo in a non-HD 2500 5.3 with lq9 cam & ls3 2yrs ago, it's an absolute blast like your blue truck is described. Slam the gas and the wastegates are opening when it finishes downshifting.
BTW one thing that helps response is a 2-2.25" crossover. Most people do a 2.5-3", but that's way too much for under 1000hp. All it does is create lag with zero HP gains.
Same thing richard holdener preaches. Keep the stock cam, converter,heads and put a smaller turbo on it. Everything on trucks is setup for the best low down torque from the factory already
As someone else who has a boosted towing Silverado, I agree with everything you've said. Stock (small) cam/converter is the way to go when using them like a truck.
I have a 2018 Chevy Silverado HD with 6.0l. Like to keep it stick but don’t know what turbo to get so I can continue to use it as a daily work truck for towing. Per your experience, what do you suggest?
@@isactoriguevara6030 I wouldn't go too much smaller than a 78/75 with a .96ar turbine housing. Keep the turbine in the 72mm+ region with a decent size ar housing and you would be perfect 🤙
@@BocaChevy thanks for the advice!
@BocaChevy s475 with 1.15 back housing lq4 truck norris cam 2500 stall triple disk. 4.10 ratio Good combo for towing or no?
@@loganolsen8415 yeah you'll be happy lol
Can't find a single video on youtube of someone talking about the repercussions of modding an Ls engine. I drive a Denali 6.0l and wanted to throw a procharger or cam or both on it and heard about the torque converter being an issue or the 4l65e not handling more than 380ft/lbs torque. Hearing your story is more insight than 90% of the websites I've been researching lately.
Thank you
@AJ-sh8uv if you look at the turbo awd truck I did, it had the drive train out of an 06 escalade. Lq9, 4l65e, etc.
Very cool set up on that black truck. Don't underestimate the oe camshaft. I would love that setup on mine 2500hd
It really works well. Good drive ability, mpg, and bottom end tq. It makes almost 300 ft lbs at 2k rpm.
I need something for my 2013 2500 HD that I use for my business delivering trailers.
Approximate cost ?
I’ve always wondered why there hasn’t been any talk on stuff like this coming from the factory for a diesel alternative/ option or add on for gas trucks.
Hey I’m so surprised I found this video but I just traded my truck for that quadasteer yesterday that’s crazy I just thought it was cool awesome video brother
Thanks! The QS was definitely one of my favorites.
Great video. Thanks for the info!
I’m glad I found your channel. I’ve been going back-and-forth about swapping my 6.5 diesel to a 6.0 gas with a turbo
Awesome man
Lots of good stuff in this video! I just bought an ‘05 2500HD 6.0 for light plowing and winter driving. My 2WD ZF6 Duramax does all the summertime work. Would you say either setup would be any better than the other for my plowing and occasional towing activities? I have a Duramax roller with rad and intercooler (and piping too but I doubt I could use much of that). I have a set of new Camaro cast manifolds I have thought might be helpful, as I need to fix my leaky stock ones anyway.
I would go with the latest 7875 w/ the 1.25ar exhaust housing and run a 4" exhaust. The duramax intercooler pipes won't fit, as I have tried. You'll need a t4 turbo log on the passenger side and a stock truck manifold works fine on the driver's side.
Ive teated several setups..
Best combo i found with a LQ4 was a 206/214 .553/.553 115 and a S475/96.
My next setup will be a S468/96 with next size up A/R.
Also some Water/Meth always help keep everything nice and clean inside.
Cool, keep us posted
Keep these vid going. I have yet to find much info on a turbo setup for a 6.0. I have a 2018 2500hd 6.0 with a stock VVT cam. What’s your thoughts on a cam for it and a turbo was thinking of staying stock on the converter not looking for a race truck lol. Just want it to tow my 8k lb rv better. Thx and good luck with the channel.
I did a gen v 6.2 with a cam and headers, and it made 409 whp and 433 tq.
I would try the stock cam, or do dod/vvt delete and do a low 200's duration cam. The latest billet 7875 with a 1.25 ar.
Excellent video. Thank you for explaining this. I haven't been considering a turbo, but the t4 could be a great add to my build.
It's so true that you want power down low. How often are you revving around 6000, even when not towing in one of these lol?
guy nearby me takes the stock convertor and cuts them then adds a smaller Dia turbine side and keeps the clutch side stock. Basically allows him to take the stock convertor from 2500rpm stall to 2800 - 3000 and still have a larger clutch. perhaps somebody makes a convertor like that with a triple disk
Lol, the good ol GM Average mpg readout is always way off. My 2500HD says I get 7.7mpg but I know damn well it get more than that and I have 37 inch tires on mine.
Do you have any driving videos of the Quadrasteer? I picked up a GMC 1500hd QS truck last week myself. I forgot how pathetic these 6.0 4l80e trucks are stock! I would like to do something similar to what you've done there. Nice and simple.
No sir, I actually didn't get any videos of it driving, and I sold it last Friday...
Would love to see more on the 1500hd build. Like others would love to see heavy towing with the setup. What did you do to fuel system on 1500hd?
I have a few build videos of the 1500hd. It has a 450lph in-tank with a hydramat, 100# Holley inj, pqy return style regulator.
Once I get the red 2500hd back together...I'll try to get some towing videos. I just got the Yank triple disc back today...and they loosened the converter up to 2500 rpm and now I'm waiting to get the transmission back.
Great info on turbo gas HD set up. On a side note… I didn’t know that Landry from Friday Night Lights did truck reviews lol jk
I would love to know what fuel pump you are using on this thing been looking and not really getting any answers because nobody usually builds 2500s also is your system a returnless or a return system?
@@sonnyrojas7275 Its a 535 lph pump, Holley rails, 80# inj, pqy return style regulator.
@@MPKPerformanceI really appreciate the response
Did you do anything to the transmission? I have one I’m planning on boosting. After watching your video I’ll probably stick closer to a stick style driveability
Yes, I built the trans, billet input, hd2 kit, triple disc converter,etc.
Great info sir, you also work on your pastors' vehicles, I see, lol
So at the end you say you would rather have a bigger exhaust housing but would going from a .96 ar to a 1.25 not hurt the spool time drastically? I guess if your goal is big HP then thats what you would want.
Yeah, he has a 97 Chevrolet Z71 that keeps me busy.
I say the larger ar on the 7875 because with the 6.0L, it makes a ton of back pressure and a 1.25 would help alleviate that. The .96 is a 3" dp, and the 1.25 is a 4". I don't think it would affect the spool time between those housings. I have run a cast 7875 1.25 on a L77 in a Caprice ppv, and it was pretty instant.
@MPKPerformance Awesome, with every video you post I'm getting closer and closer to just pulling the trigger and doing my truck lol. Thinking about just throwing a 5.3 in it with a properly sized turbo since my 6.0 is TIRED and I've got 2 good low mile 5.3s sitting here. I figure if I can get boost low enough it should t be much differance in TQ than with a 6.0 but I dunno.
The 5.3 will be fine, boost fills in the gaps.
If you have any questions, just ask.
@MPKPerformance thanks
Hey man what gas do you run in them to not have detonation and screw pistons
E85 if you can get it.
Would you be able to run normal pump gas other than E85 with this combo, maybe with a different tune? E85 is kind of rare around me and I want to turbo my 6.0 and make over 400hp. Nothing crazy just more than stock. My trucks mostly a daily driver but I do tow with it.
All this was on pump 93
I just bought a 2018 Silverado 2500 HD with the 6.0L. I want to use it as a daily work truck that can continue to haul and have low end power. Per your experience, what turbo set up (including other components if needed) would you recommend?
A 7875 t4 w/ a .96 ar is the best bang for the buck for bottom end tq.
@@MPKPerformance thank you!
Also have you tried locking TCC in 2nd gear? I found it does a good bit better towing and keeps trans temp down.
No, I only apply tcc in fourth gear.
Just picked up a 06 2500 , how well do these set ups tow out west in the mountains? Who psi is the black truck on? Also what fuel? I want that exact set up
@@365AdventureCo. I have a video series on the quadrasteer on the channel
Great video. I see your not going real high on boost. Do you gap your rings or just add turbo?
Just add turbo.
I need something for my 2013 2500 HD that I use for my business delivering trailers.
Is there a kit you purchased for the turbo or do you piece it together?
@@kountryquads9475 I build my own stuff.
So i recently purchased an 02' 2500 HD 6.0 gas burner. Its a normal just cruise around toy truck but i also want a little more power too it. What affordable turbo without having to change the cam would you recommend me getting? Thanks, and im a new follower :)
I would do a newer 7875 with a 1.25 exhaust housing. Look on vs racing's website.
Thank you brotha! ill give it a look my man and maybe even send you an update vid when the projects over
@@MPKPerformance
I heard a supercharger would be perfect. I have a 2004 and i think im going to do that with a stage 1 upgrade
Anymore progress on the 69 c10 project?
Working on it as I type, almost did a video on it this morning.
@@MPKPerformance that's awesome I always look forward to seeing your projects especially the 69 c10
Well, thank you sir. I'll make a video on it soon, just doing boring rust repair on it now.
needs moar stock LS3 cam :)
The btr stg2 teuck cam is close to the same specs lol
What about doing an Allison 1000 swap? It could handle the heat and the abuse better than a 4L80e
I've thought about it, but the 80e has done ok.
I put a Comp 216/220 cam in my 1500hd when I lost a lifter looking for a little more power. I like it but want a little more for towing. Would that smaller turbo be a good choice given my cam or should I think of going back to the smaller stock cam?
@@joeamato3936 that cam will do fine. I’d go with a .96 ar for quicker response.
U think it’s safe to do a turbo on my 201k mile 6.0 stock everything if not what would u do first?
@codytones8956 the quadrasteer had about that mileage when I did the turbo on it.
I got a 1500HD quadrasteer with 273 rear. What would u recommend to get make it faster? What would you recommend for a exhaust setup if i wanna turbo it, because I waned to do headers and exhaust first and work on the engine when I have more money? I don't wanna screw myself. Don't know much about this stuff yet
Thanks
There's a few videos on here of doing a turbo setup on my quadrasteer 1500hd. If you plan on going turbo, headers would be a waste of money.
Did you buy a turbo kit for the black truck? Can you send me some info please? Looking to do this to my 02 2500 6.0 4x4 and did you tune it?
No, I build all of my stuff and do a base tune. I then take them to my buddy with a dyno, and he does final tuning.
My 02 1/2 ton on 20s n 33s stock 3:73s extended cab with a cammed 6.0 swap is going through similar issues the power is not down low at all 2600 stall it feel like a turd as a daily needs a lot of throttle to get movin I haven’t tried to tow with it yet. And I have a Texas speed stage 2 225/236 629/615 114LSA 660 springs on 317 heads
Yeah, that duration is shifting the power higher in the rpms. I've run the summit high torque cam with good results. 212/218 .600/.585 on a 110.
You could always regear if you don’t want too go boost, 4.88 gears would do your truck justice
We just swapped a 4.8 from a stage 2 turbo cam to a summit tq cam and it made all the difference in the world. It has 200/205 with .550 on a 113. The crew cabs don't need the duration a lighter vehicle does.
My daily/tow rig is a 1500hd and will be buy stuff for a turbo kit soon. Looking at a VS 7875 t51 turbo and Trick manifold setup. What fuel system parts would you use for a pump gas setup around 500 who?
525lph pump, pqy reg, holley rails, 100# inj.
So if this was a half ton set up. Yukon/sierra ect..
What turbo would you go with.
Same set up as this hd1500. Just add a turbo.
Some daily driving some towing.
7875 latest generation, .96 ar.
Won’t be laggy or anything
@zacharymelvin3487 not in my experience. Need the correct cam and converter too though.
On your second silverado with the t4... did you just switch out your valve springs and put in the intercooler? Or did you also use a different stall?
Ls6 springs, duramax intercooler, stock stall.
@@MPKPerformance thanks! Does it run hotter than stock or just hotter than your other silverado?
@@TGossage the red truck runs cooler than my other Silverados because of the larger Duramax radiator/intercooler combo.
Hey man I got a 6L 799 heads flat top pistons 218/227 112+2 cam
getting an S475/83 1.10 you think that turbo would be the right combo or should I be using a bigger turbine wheel?
@@jacobvanhalteren7452 sounds similar to one I've done before. What are your goals for it?
@@MPKPerformance quick Spool, 8-10psi of boost aiming for around 600-650wheel hp and torque
it's a 2500HD as well so it's heavy, just want it to be fast. turbo I bought is also a billet wheel 7+7
Most I'd be looking to get out of the setup is 700hp maybe a little more than that for torque 14psi max, but the numbers above are probably more realistic
@@jacobvanhalteren7452 I've made 700whp with that turbo on pump gas. Put a loose converter (3k) in it to get it to spool quicker.
@@MPKPerformance Awesome man, that really encouraging had people telling me there was no way it would do 700whp but I know that it's possible if it's pushed hard enough. might be all it's got though lol. But it will be good for Spool up
I dont know of any tuners near me, is there any companys that sell programers for adding a turbo to a 6.0l?
Your best bet would be a remote tune.
how much did it cost and what all did buy to get the turbo on the truck on the rear wheel steer truck
There's a whole video series on both trucks.
Do you think a T6 would work better (towing) with a 408? Im worried about the T4 choking the exhaust when pulling for long periods of time through the hills
I still think a t4 would be the way to go. I'd get the largest ar available and run a 4" exhaust. You want it sized where it spools in the lower rpm so you can use the power. Also, a short duration cam helps with tq production.
T4. I have a t6 85/102 going on my 408 for my camaro. Bigger cam, ls3, heads, and higher compression.
@derekr1854 I've reached out to huron speed, they are recommending T6, I also have ported 823 heads going on this 408, I'll probably run the s480 they are recommending. I'd rather it spool a little slower and not have back pressure egt problems, than light instantly but melt the pistons out of it while pulling up a long grade
@adrianlaverick8040 going in a truck or car? Power levels and boost levels determine on what turbo you should run
@derekr1854 it's going in my 03 2500HD, ported 823 heads, 408 stroker bottom end, fast 102mm LSXRT intake, whatever boost it will safely run on pump gas with water meth injection. 5.38 gears on 35 in tires, shooting for 700hp, wouldn't mind more though. Based on some other trucks I've seen on UA-cam I think that's pretty reasonable.
On the black truck what’s the link for that turbo? Really wanting to build what you have on that black truck.
turbo4less.com/product/vsr-next-gen-7875-cast/
@@MPKPerformancedid you order it with the .96ar dual v band?
@@MikeyM-w7u no, the black truck had a t4 .96 ar. It really needed a 1.25 ar because of backpressure.
I have an 06 chevy sileverado 6.0 wt looking to turbo have any links to a turbobkit?
I buy a t4 log and build everything else.
What fuel do you run only thing available in my area is 87 octane and diesel no premium unless I drive 45min to nearest city and all they have is 91octane and it's ify if they even have that at times😬
I run pump 93. If you only have 87, just tune for 87 and start lower on the timing.
LSX Turbo 2500 Truck - Pulling a 15K trailer!!!: ua-cam.com/video/YMdzJHj1wEI/v-deo.html
Do you think that 7875 will work well on a 5.3? I have a 2007 NNBS Silverado with the LY5 and I have that turbo (On3 7975 .96 AR and 3 inch V band). I was going to purchase a 70mm turbo for the 5.3 but if I don't have to, I won't. Do you think the turbo I have will work well for towing?
Yes, the 7875 will work fine on the 5.3, it will actually take you further than it would on a 6.0.
@@MPKPerformance thank you. I could never get a straight answer for this question. Like I said, I was about to order a 70mm turbo for it but if I don't have to, I won't. I also have an LY6 for the truck just in case the 5.3 gives up the holy ghost. Not looking to make all the HP. Just all the TQ. Truck is mainly a cruiser, hauler and tow vehicle. Thanks again!
We had that turbo on a 4.8 in a crew cab, it made 500whp on 10 psi.
@@MPKPerformance nice. That's good to know. How much power did it make at 10 psi?
The 4.8 made 475 whp on 10 psi.
The 6.0L made 480 whp on 10 psi with lots of backpressure, but it also made 535 ft lbs.
What ar. On the s480 would you recommend for a 6.0
I think the vsr 80mm is a t4 turbo with 83x75 with a 1.10. If you go with a 7875, get a 1.25
@@MPKPerformance yup I’m going with the 7875 1.25ar. Thank you!
What do you do with the factory pcv setup?
Vent to atmosphere or a catch can.
What hot side did u use. I used a china one on a s10 worked great but I'd like to do my 07 2500 and keep ac
Amazon log, and I made the crossover...
Are you on stock injectors?
No sir. Stock injectors don't flow enough for a mild 6.0.
Did you relocate the battery?
No
What octane do you use?
Pump 93
Injector and fuel pump?
Red truck has Deka 80's, and 525lph. Qs has Holley 100# and 450lph.
Did you run a hotwire kit? 525 pulls alot of amps.
Where did you order your kit?
I built everything.
Which injectors did you use?
@hskrh8trs Red truck has Deka 80's, and 525lph. Qs has Holley 100# and 450lph.
Huron speed has a great kit on a group buy till Feb 2
Hp tuner?
Yes
Not all 2500's are 410's or 411's
Ok
What's a good way to contact you? I'd love this done to my truck I tow and would love to know everything I can. I have 2 6.0s just like you ones 373 ones 410 but I'd love to get both done
I'm back at an engineering job and no longer doing work for other people. Sorry.
@@MPKPerformance no problem appericate the response! I'm chasing a random misfire in my 03 6.0. It's been a nightmare trying to figure it out.