BMW E38 7 series (pre-facelift) Retrofit HID xenon DIY headlight repair and upgrade kit
Вставка
- Опубліковано 5 жов 2021
- This BMW 7 E38 HID xenon headlight DIY retrofit kit contains everything you need to repair and upgrade your HID xenon headlights. The necessary parts to swap your old, blacked-out single-xenon (low-beam xenon only) projectors for powerful new bi-xenon (both low- and high-beam xenon) projectors are included. In this video, the installation of the Aharon projectors with the custom brackets is shown. This kit will improve the light output, guaranteed.
Want to improve your light? You can buy the kit here;
retrofitlab.com/products/bmw-...
- Very easy to install
- Cost-efficient
- Bulbs and ballast can be re-used
- Improved light output
- OEM look
14:13 Old output with the worn-out projector
14:16 Output with new projector
Aharon Optimus TR Mini
Providing a light output unmatched by most OEM projectors, the new Aharon Optimus TR Mini is the perfect retrofit for this headlight. It uses D2S bulbs, so you can keep your current lamps and ballasts. The light height and pattern control will work as usual, too. And as the cherry on top: with all the necessary wiring supplied, you also get an upgrade from single xenon to bi-xenon. The result is incredibly bright lighting - a huge improvement in both high and low beams!
#BMW #7series #E38 #Retrofit #Custom #Headlights #upgrade #repair #tuning #Light #DIY #Improvement #HID #Xenon #Aharon #projector #D2S #koplamp #Scheinwerfer
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage. - Авто та транспорт
Wish all headlights were that easy to open.
When Bosch made lights EASY to work on! Just like the Volvo 700/900's.
Yes! Waaaaay better than Permaseal...
I wish these mounting brackets would’ve been available 5 years ago when I was upgrading my E38.
Nice.
Thanks :-)
Hi, do you have such installation guide for halogen to xenon retrofit with your kit from website?
Is this upgrade available for the 2001 facelift version of the e38?. I have HID but could barely see anything out of them at night.
We also have a kit for the facelift single xenon headlights: retrofitlab.com/products/bmw-7-e38-1994-2001-single-xenon-headlights?_pos=2&_sid=ff5adff33&_ss=r
These are on brand new headlights? I tried doing this on some spare headlights I have and the rubber sealant doesn’t melt it’s brittle, do you have any advice for this?
Hello, You can open the headlight with the heat of the oven. Click on this link for the isntructure for reference.. retrofitlab.com/apps/help-center#hc-how-to-open-a-permaseal-headlight
Is the installation process the same for E38 face-lift headlights?
The idea of a new projector and mounting bracket is the same, but a different bracket is used in the facelift, because they used a different projector in the facelift headlight.
retrofitlab.com/products/bmw-7-e38-1994-2001-single-xenon-headlights
Is there a difference when fitting with the bi-xenon kit?
From the outside you will not see a difference and the headlight will look original. In the output you will see a huge difference. The new projector is much brighter and the light pattern is much sharper. See 14:12 for the difference.
So the kit is only for 1 side? in other words i need 2 of these to do my car?
No :-) 1 kit is enough for 2 headlights, so you only need 1 kit.
Ist das auch für facelift
Dieses Kit passt nicht auf den Facelift-Scheinwerfer. Wir haben jedoch dieses Kit für den BMW E38 Facelift Einzel-Xenon-Scheinwerfer: retrofitlab.com/collections/bmw-7-e38
Do you guys redo headlights for others and how much do you charge ?